From: "Bruno Prémont" <bonbons-ud5FBsm0p/xEiooADzr8i9i2O/JbrIOy@public.gmane.org>
To: Matt Fleming <matt-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org>
Cc: P J P <ppandit-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"H. Peter Anvin" <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>
Subject: Re: 3.12 to 3.13 boot regression bisected - still applies to 3.16
Date: Tue, 5 Aug 2014 16:21:07 +0200 [thread overview]
Message-ID: <20140805162107.4698f717@pluto> (raw)
In-Reply-To: <20140805125548.GP15082-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org>
On Tue, 5 Aug 2014 13:55:48 +0100 Matt Fleming wrote:
> I suspect if you enable CONFIG_RELOCATABLE things will work just fine.
> I've actually got a patch to force that option if CONFIG_EFI_STUB is
> enabled to mitigate this exact problem. Could you try it out (see
> below)?
>
> Without CONFIG_RELOCATABLE the early boot code will try and decompress
> the kernel image to LOAD_PHYSICAL_ADDR. That may have worked in the days
> of BIOS, when it was reasonable to assume that nothing important would
> be sitting in the 0x10000000 region, but that's just not so for UEFI.
>
> For UEFI we need to request memory from the firmware and not stray
> outside the bounds of those allocations. Otherwise there's the potential
> that we'll trash bits of the firmware's code/data.
Thanks, enabling CONFIG_RELOCATABLE allows kernel to successfully boot!
So you can add my tested-by to the patch.
If of interest, memory layout information as reported by 3.16 with
CONFIG_RELOCATABLE enabled:
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007da97fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007da98000-0x000000007dae5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007dae6000-0x000000007db80fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007db81000-0x000000007dd89fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dd8a000-0x000000007f362fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f363000-0x000000007f363fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f364000-0x000000007f3e9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f3ea000-0x000000007f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6d6e3018-0x6d6f7657] usable ==> usable
[ 0.000000] e820: update [mem 0x6d6da018-0x6d6e2057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006d6da017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6da018-0x000000006d6e2057] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6e2058-0x000000006d6e3017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6e3018-0x000000006d6f7657] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6f7658-0x000000007da97fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007da98000-0x000000007dae5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007dae6000-0x000000007db80fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007db81000-0x000000007dd89fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007dd8a000-0x000000007f362fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f363000-0x000000007f363fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f364000-0x000000007f3e9fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007f3ea000-0x000000007f7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047fffffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x7db05000 ACPI 2.0=0x7db05000 SMBIOS=0xf04c0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x000000000000e000-0x000000000003f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000050000) (0MB)
[ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x0000000000050000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x00000000038e7000) (24MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x00000000038e7000-0x000000006d6d9000) (1693MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000006d6d9000-0x000000006d6f9000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x000000006d6f9000-0x000000006efe0000) (24MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000006efe0000-0x0000000071d8d000) (45MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000071d8d000-0x0000000071e5c000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000071e5c000-0x0000000071e60000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000071e60000-0x0000000071e90000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000071e90000-0x0000000071eb5000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000071eb5000-0x0000000071fe6000) (1MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000071fe6000-0x0000000071fef000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000071fef000-0x0000000071ff1000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000071ff1000-0x0000000071ff5000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000071ff5000-0x0000000071ff6000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000071ff6000-0x000000007200f000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000007200f000-0x0000000072010000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000072010000-0x0000000072013000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000072013000-0x0000000072017000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000072017000-0x0000000072018000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000072018000-0x0000000072019000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000072019000-0x0000000072061000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000072061000-0x00000000720a6000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000720a6000-0x00000000720ab000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000720ab000-0x00000000720d1000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000720d1000-0x00000000720dc000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000720dc000-0x00000000720dd000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000720dd000-0x00000000720f9000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000720f9000-0x000000007232e000) (2MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000007232e000-0x0000000072332000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000072332000-0x0000000072357000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x0000000072357000-0x000000007235e000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000007235e000-0x000000007235f000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000007235f000-0x0000000072365000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000072365000-0x0000000072370000) (0MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000072370000-0x0000000072376000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000072376000-0x000000007237f000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000007237f000-0x0000000072380000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000072380000-0x000000007d0ff000) (173MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000007d0ff000-0x000000007d5e4000) (4MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x000000007d5e4000-0x000000007da98000) (4MB)
[ 0.000000] efi: mem48: type=0, attr=0xf, range=[0x000000007da98000-0x000000007daa7000) (0MB)
[ 0.000000] efi: mem49: type=0, attr=0xf, range=[0x000000007daa7000-0x000000007dae6000) (0MB)
[ 0.000000] efi: mem50: type=9, attr=0xf, range=[0x000000007dae6000-0x000000007db05000) (0MB)
[ 0.000000] efi: mem51: type=9, attr=0xf, range=[0x000000007db05000-0x000000007db81000) (0MB)
[ 0.000000] efi: mem52: type=10, attr=0xf, range=[0x000000007db81000-0x000000007dc6f000) (0MB)
[ 0.000000] efi: mem53: type=10, attr=0xf, range=[0x000000007dc6f000-0x000000007dd8a000) (1MB)
[ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x000000007dd8a000-0x000000007e1d2000) (4MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000007e1d2000-0x000000007e23e000) (0MB)
[ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x000000007e23e000-0x000000007e240000) (0MB)
[ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000007e240000-0x000000007f2fc000) (16MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000007f2fc000-0x000000007f310000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x000000007f310000-0x000000007f363000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x000000007f363000-0x000000007f364000) (0MB)
[ 0.000000] efi: mem61: type=10, attr=0xf, range=[0x000000007f364000-0x000000007f3ea000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000007f3ea000-0x000000007f539000) (1MB)
[ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x000000007f539000-0x000000007f7d7000) (2MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000007f7d7000-0x000000007f7dd000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x000000007f7dd000-0x000000007f7e1000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000007f7e1000-0x000000007f800000) (0MB)
[ 0.000000] efi: mem67: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB)
[ 0.000000] efi: mem68: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
[ 0.000000] efi: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem70: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: FUJITSU PRIMERGY RX200 S7/D3032-A1, BIOS V4.6.5.3 R2.21.0 for D3032-A1x 04/05/2013
WARNING: multiple messages have this Message-ID (diff)
From: "Bruno Prémont" <bonbons@linux-vserver.org>
To: Matt Fleming <matt@console-pimps.org>
Cc: P J P <ppandit@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-efi@vger.kernel.org,
"H. Peter Anvin" <hpa@zytor.com>
Subject: Re: 3.12 to 3.13 boot regression bisected - still applies to 3.16
Date: Tue, 5 Aug 2014 16:21:07 +0200 [thread overview]
Message-ID: <20140805162107.4698f717@pluto> (raw)
In-Reply-To: <20140805125548.GP15082@console-pimps.org>
On Tue, 5 Aug 2014 13:55:48 +0100 Matt Fleming wrote:
> I suspect if you enable CONFIG_RELOCATABLE things will work just fine.
> I've actually got a patch to force that option if CONFIG_EFI_STUB is
> enabled to mitigate this exact problem. Could you try it out (see
> below)?
>
> Without CONFIG_RELOCATABLE the early boot code will try and decompress
> the kernel image to LOAD_PHYSICAL_ADDR. That may have worked in the days
> of BIOS, when it was reasonable to assume that nothing important would
> be sitting in the 0x10000000 region, but that's just not so for UEFI.
>
> For UEFI we need to request memory from the firmware and not stray
> outside the bounds of those allocations. Otherwise there's the potential
> that we'll trash bits of the firmware's code/data.
Thanks, enabling CONFIG_RELOCATABLE allows kernel to successfully boot!
So you can add my tested-by to the patch.
If of interest, memory layout information as reported by 3.16 with
CONFIG_RELOCATABLE enabled:
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007da97fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007da98000-0x000000007dae5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007dae6000-0x000000007db80fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007db81000-0x000000007dd89fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dd8a000-0x000000007f362fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f363000-0x000000007f363fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f364000-0x000000007f3e9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f3ea000-0x000000007f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6d6e3018-0x6d6f7657] usable ==> usable
[ 0.000000] e820: update [mem 0x6d6da018-0x6d6e2057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006d6da017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6da018-0x000000006d6e2057] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6e2058-0x000000006d6e3017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6e3018-0x000000006d6f7657] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d6f7658-0x000000007da97fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007da98000-0x000000007dae5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007dae6000-0x000000007db80fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007db81000-0x000000007dd89fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007dd8a000-0x000000007f362fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f363000-0x000000007f363fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f364000-0x000000007f3e9fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007f3ea000-0x000000007f7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047fffffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x7db05000 ACPI 2.0=0x7db05000 SMBIOS=0xf04c0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x000000000000e000-0x000000000003f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000050000) (0MB)
[ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x0000000000050000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x00000000038e7000) (24MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x00000000038e7000-0x000000006d6d9000) (1693MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000006d6d9000-0x000000006d6f9000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x000000006d6f9000-0x000000006efe0000) (24MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000006efe0000-0x0000000071d8d000) (45MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000071d8d000-0x0000000071e5c000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000071e5c000-0x0000000071e60000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000071e60000-0x0000000071e90000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000071e90000-0x0000000071eb5000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000071eb5000-0x0000000071fe6000) (1MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000071fe6000-0x0000000071fef000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000071fef000-0x0000000071ff1000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000071ff1000-0x0000000071ff5000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000071ff5000-0x0000000071ff6000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000071ff6000-0x000000007200f000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000007200f000-0x0000000072010000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000072010000-0x0000000072013000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000072013000-0x0000000072017000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000072017000-0x0000000072018000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000072018000-0x0000000072019000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000072019000-0x0000000072061000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000072061000-0x00000000720a6000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000720a6000-0x00000000720ab000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000720ab000-0x00000000720d1000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000720d1000-0x00000000720dc000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000720dc000-0x00000000720dd000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000720dd000-0x00000000720f9000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000720f9000-0x000000007232e000) (2MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000007232e000-0x0000000072332000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000072332000-0x0000000072357000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x0000000072357000-0x000000007235e000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000007235e000-0x000000007235f000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000007235f000-0x0000000072365000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000072365000-0x0000000072370000) (0MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000072370000-0x0000000072376000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000072376000-0x000000007237f000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000007237f000-0x0000000072380000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000072380000-0x000000007d0ff000) (173MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000007d0ff000-0x000000007d5e4000) (4MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x000000007d5e4000-0x000000007da98000) (4MB)
[ 0.000000] efi: mem48: type=0, attr=0xf, range=[0x000000007da98000-0x000000007daa7000) (0MB)
[ 0.000000] efi: mem49: type=0, attr=0xf, range=[0x000000007daa7000-0x000000007dae6000) (0MB)
[ 0.000000] efi: mem50: type=9, attr=0xf, range=[0x000000007dae6000-0x000000007db05000) (0MB)
[ 0.000000] efi: mem51: type=9, attr=0xf, range=[0x000000007db05000-0x000000007db81000) (0MB)
[ 0.000000] efi: mem52: type=10, attr=0xf, range=[0x000000007db81000-0x000000007dc6f000) (0MB)
[ 0.000000] efi: mem53: type=10, attr=0xf, range=[0x000000007dc6f000-0x000000007dd8a000) (1MB)
[ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x000000007dd8a000-0x000000007e1d2000) (4MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000007e1d2000-0x000000007e23e000) (0MB)
[ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x000000007e23e000-0x000000007e240000) (0MB)
[ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000007e240000-0x000000007f2fc000) (16MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000007f2fc000-0x000000007f310000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x000000007f310000-0x000000007f363000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x000000007f363000-0x000000007f364000) (0MB)
[ 0.000000] efi: mem61: type=10, attr=0xf, range=[0x000000007f364000-0x000000007f3ea000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000007f3ea000-0x000000007f539000) (1MB)
[ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x000000007f539000-0x000000007f7d7000) (2MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000007f7d7000-0x000000007f7dd000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x000000007f7dd000-0x000000007f7e1000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000007f7e1000-0x000000007f800000) (0MB)
[ 0.000000] efi: mem67: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB)
[ 0.000000] efi: mem68: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
[ 0.000000] efi: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem70: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: FUJITSU PRIMERGY RX200 S7/D3032-A1, BIOS V4.6.5.3 R2.21.0 for D3032-A1x 04/05/2013
next prev parent reply other threads:[~2014-08-05 14:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-04 9:34 3.12 to 3.13 boot regression bisected - still applies to 3.16 Bruno Prémont
2014-08-04 9:34 ` Bruno Prémont
2014-08-04 12:27 ` Matt Fleming
2014-08-04 12:27 ` Matt Fleming
[not found] ` <20140804122728.GH15082-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org>
2014-08-04 13:06 ` Bruno Prémont
2014-08-04 13:06 ` Bruno Prémont
2014-08-04 13:54 ` Matt Fleming
2014-08-05 8:02 ` Bruno Prémont
2014-08-05 8:45 ` Matt Fleming
[not found] ` <20140805084542.GM15082-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org>
2014-08-05 9:13 ` Bruno Prémont
2014-08-05 9:13 ` Bruno Prémont
2014-08-05 9:18 ` Matt Fleming
[not found] ` <20140805091848.GN15082-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org>
2014-08-05 11:51 ` Bruno Prémont
2014-08-05 11:51 ` Bruno Prémont
2014-08-05 12:11 ` Bruno Prémont
2014-08-05 12:11 ` Bruno Prémont
2014-08-05 12:55 ` Matt Fleming
2014-08-05 12:55 ` Matt Fleming
[not found] ` <20140805125548.GP15082-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org>
2014-08-05 14:21 ` Bruno Prémont [this message]
2014-08-05 14:21 ` Bruno Prémont
2014-08-05 15:07 ` Matt Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140805162107.4698f717@pluto \
--to=bonbons-ud5fbsm0p/xeiooadzr8i9i2o/jbrioy@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org \
--cc=linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matt-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org \
--cc=ppandit-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.