Re: [alsa-devel] [PATCH v2 1/2] mfd: arizona: Add support for INn_Mode register control

[Charles Keepax <ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>]

On Wed, Aug 13, 2014 at 08:53:13PM +0900, Inha Song wrote:
> Some boards need to set the INn_MODE[1:0] register to change
> the input signal patch. This wlf,inmode property is optional.
> If present values must be specified by the number of
> ARIZONA_MAX_INPUT.
> 
> Example:
>    - wlf,inmode = <2 0 2 0>;	/* IN1, IN3 use DMIC */
> 
> Signed-off-by: Inha Song <ideal.song-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/mfd/arizona-core.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 10a0cb9..2b68ccd 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -534,7 +534,7 @@ EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
>  static int arizona_of_get_core_pdata(struct arizona *arizona)
>  {
>  	struct arizona_pdata *pdata = &arizona->pdata;
> -	int ret, i;
> +	int ret, i, proplen;
>  
>  	pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
>  
> @@ -560,6 +560,15 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
>  			ret);
>  	}
>  
> +	proplen = of_property_count_u32_elems(arizona->dev->of_node,
> +					      "wlf,inmode");
> +	if (proplen > 0 && proplen <= ARRAY_SIZE(arizona->pdata.inmode)) {
> +		for (i = 0; i < proplen; i++)
> +			of_property_read_u32_index(arizona->dev->of_node,
> +						   "wlf,inmode", i,
> +						    &arizona->pdata.inmode[i]);
> +	}
> +

of_property_read_u32_array with proplen as the length should be
ok here since we know the size is smaller than the inmode array.

Thanks,
Charles
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html