All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: Shawn Guo <shawn.guo@freescale.com>
Cc: Liu Ying <Ying.Liu@freescale.com>,
	linux-pwm@vger.kernel.org, s.hauer@pengutronix.de,
	LW@KARO-electronics.de, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 3/3] pwm: i.MX: Avoid sample FIFO overflow for i.MX PWM version2
Date: Mon, 25 Aug 2014 15:49:29 +0200	[thread overview]
Message-ID: <20140825134927.GK4163@ulmo.nvidia.com> (raw)
In-Reply-To: <20140825115628.GA7008@dragon>

[-- Attachment #1: Type: text/plain, Size: 2229 bytes --]

On Mon, Aug 25, 2014 at 07:59:01PM +0800, Shawn Guo wrote:
> On Wed, May 28, 2014 at 06:50:13PM +0800, Liu Ying wrote:
> > The i.MX PWM version2 is embedded in several i.MX SoCs,
> > such as i.MX27, i.MX51 and i.MX6SL.  There is a 4-word(16bit)
> > sample FIFO in this IP.  Each FIFO slot determines the duty
> > period of a PWM waveform in one full cycle.  The IP spec
> > mentions that we should not write a fourth sample because
> > the FIFO will become full and triggers a FIFO write error
> > (FWE) which will prevent the PWM from starting once it is
> > enabled.  In order to avoid any sample FIFO overflow issue,
> > this patch clears all sample FIFO by doing software reset
> > in the configuration hook when the controller is disabled
> > or waits for a full PWM cycle to get a relinquished FIFO
> > slot when the controller is enabled and the FIFO is fully
> > loaded.
> > 
> > The FIFO overflow issue can be reproduced by the following
> > commands on the i.MX6SL EVK platform, assuming we use PWM2
> > for the debug LED which is driven by the pin HSIC_STROBE
> > and the maximal brightness is 255.
> > echo 0   > /sys/class/leds/user/brightness
> > echo 0   > /sys/class/leds/user/brightness
> > echo 0   > /sys/class/leds/user/brightness
> > echo 0   > /sys/class/leds/user/brightness
> > echo 255 > /sys/class/leds/user/brightness
> > Here, FWE happens(PWMSR register reads 0x58) and the LED
> > can not be lighten.
> > 
> > Another way to reproduce the FIFO overflow issue is to run
> > this script:
> > while true;
> > 	do echo 255 > /sys/class/leds/user/brightness;
> > done
> > 
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Shawn Guo <shawn.guo@freescale.com>
> > Cc: Lothar Waßmann <LW@KARO-electronics.de>
> > Cc: linux-pwm@vger.kernel.org
> > Cc: linux-arm-kernel@lists.infradead.org
> > Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
> 
> The whole series,
> 
> Acked-by: Shawn Guo <shawn.guo@freescale.com>
> 
> Thierry,
> 
> Can you pick them up if they look good to you?

All three patches applied with your Acked-by (and some minor
reformatting of the commit message).

Thanks,
Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/3] pwm: i.MX: Avoid sample FIFO overflow for i.MX PWM version2
Date: Mon, 25 Aug 2014 15:49:29 +0200	[thread overview]
Message-ID: <20140825134927.GK4163@ulmo.nvidia.com> (raw)
In-Reply-To: <20140825115628.GA7008@dragon>

On Mon, Aug 25, 2014 at 07:59:01PM +0800, Shawn Guo wrote:
> On Wed, May 28, 2014 at 06:50:13PM +0800, Liu Ying wrote:
> > The i.MX PWM version2 is embedded in several i.MX SoCs,
> > such as i.MX27, i.MX51 and i.MX6SL.  There is a 4-word(16bit)
> > sample FIFO in this IP.  Each FIFO slot determines the duty
> > period of a PWM waveform in one full cycle.  The IP spec
> > mentions that we should not write a fourth sample because
> > the FIFO will become full and triggers a FIFO write error
> > (FWE) which will prevent the PWM from starting once it is
> > enabled.  In order to avoid any sample FIFO overflow issue,
> > this patch clears all sample FIFO by doing software reset
> > in the configuration hook when the controller is disabled
> > or waits for a full PWM cycle to get a relinquished FIFO
> > slot when the controller is enabled and the FIFO is fully
> > loaded.
> > 
> > The FIFO overflow issue can be reproduced by the following
> > commands on the i.MX6SL EVK platform, assuming we use PWM2
> > for the debug LED which is driven by the pin HSIC_STROBE
> > and the maximal brightness is 255.
> > echo 0   > /sys/class/leds/user/brightness
> > echo 0   > /sys/class/leds/user/brightness
> > echo 0   > /sys/class/leds/user/brightness
> > echo 0   > /sys/class/leds/user/brightness
> > echo 255 > /sys/class/leds/user/brightness
> > Here, FWE happens(PWMSR register reads 0x58) and the LED
> > can not be lighten.
> > 
> > Another way to reproduce the FIFO overflow issue is to run
> > this script:
> > while true;
> > 	do echo 255 > /sys/class/leds/user/brightness;
> > done
> > 
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Shawn Guo <shawn.guo@freescale.com>
> > Cc: Lothar Wa?mann <LW@KARO-electronics.de>
> > Cc: linux-pwm at vger.kernel.org
> > Cc: linux-arm-kernel at lists.infradead.org
> > Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
> 
> The whole series,
> 
> Acked-by: Shawn Guo <shawn.guo@freescale.com>
> 
> Thierry,
> 
> Can you pick them up if they look good to you?

All three patches applied with your Acked-by (and some minor
reformatting of the commit message).

Thanks,
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140825/8900549c/attachment-0001.sig>

  reply	other threads:[~2014-08-25 13:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-28 10:50 [PATCH 1/3] pwm: i.MX: Fix the macro MX3_PWMCR_PRESCALER(x) definition Liu Ying
2014-05-28 10:50 ` Liu Ying
2014-05-28 10:50 ` Liu Ying
2014-05-28 10:50 ` [PATCH v2 2/3] pwm: i.MX: Cleanup indentation for register definitions Liu Ying
2014-05-28 10:50   ` Liu Ying
2014-05-28 10:50   ` Liu Ying
2014-05-28 10:50 ` [PATCH v5 3/3] pwm: i.MX: Avoid sample FIFO overflow for i.MX PWM version2 Liu Ying
2014-05-28 10:50   ` Liu Ying
2014-05-28 10:50   ` Liu Ying
2014-08-25 11:59   ` Shawn Guo
2014-08-25 11:59     ` Shawn Guo
2014-08-25 11:59     ` Shawn Guo
2014-08-25 13:49     ` Thierry Reding [this message]
2014-08-25 13:49       ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140825134927.GK4163@ulmo.nvidia.com \
    --to=thierry.reding@gmail.com \
    --cc=LW@KARO-electronics.de \
    --cc=Ying.Liu@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawn.guo@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.