All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Rutland <mark.rutland@arm.com>
To: Vivek Gautam <gautam.vivek@samsung.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-samsung-soc@vger.kernel.org"
	<linux-samsung-soc@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"balbi@ti.com" <balbi@ti.com>, "kishon@ti.com" <kishon@ti.com>,
	"kgene.kim@samsung.com" <kgene.kim@samsung.com>
Subject: Re: [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7
Date: Thu, 28 Aug 2014 19:48:47 +0100	[thread overview]
Message-ID: <20140828184847.GA18464@leverpostej> (raw)
In-Reply-To: <1409212920-28526-2-git-send-email-gautam.vivek@samsung.com>

On Thu, Aug 28, 2014 at 09:01:56AM +0100, Vivek Gautam wrote:
> Exynos7 also has a separate special gate clock going to the IP
> apart from the usual AHB clock. So add support for the same.
> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> ---
>  drivers/usb/dwc3/dwc3-exynos.c |   16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
> index f9fb8ad..bab6395 100644
> --- a/drivers/usb/dwc3/dwc3-exynos.c
> +++ b/drivers/usb/dwc3/dwc3-exynos.c
> @@ -35,6 +35,7 @@ struct dwc3_exynos {
>  	struct device		*dev;
>  
>  	struct clk		*clk;
> +	struct clk		*sclk;
>  	struct regulator	*vdd33;
>  	struct regulator	*vdd10;
>  };
> @@ -141,10 +142,17 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> +	/* Exynos7 has a special gate clock going to this IP */
> +	exynos->sclk = devm_clk_get(dev, "usbdrd30_sclk");
> +	if (IS_ERR(exynos->sclk))
> +		dev_warn(dev, "couldn't get sclk\n");

Doesn't this introduce a pointless warning for Exynos SoCs other than
Exynos7?

> +
>  	exynos->dev	= dev;
>  	exynos->clk	= clk;
>  
>  	clk_prepare_enable(exynos->clk);
> +	if (!IS_ERR(exynos->sclk))
> +		clk_prepare_enable(exynos->sclk);

If you replaced the returned err value with NULL you could avoid these
IS_ERR cases.

Mark.

>  
>  	exynos->vdd33 = devm_regulator_get(dev, "vdd33");
>  	if (IS_ERR(exynos->vdd33)) {
> @@ -187,6 +195,8 @@ err4:
>  err3:
>  	regulator_disable(exynos->vdd33);
>  err2:
> +	if (!IS_ERR(exynos->sclk))
> +		clk_disable_unprepare(exynos->sclk);
>  	clk_disable_unprepare(clk);
>  	return ret;
>  }
> @@ -199,6 +209,8 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
>  	platform_device_unregister(exynos->usb2_phy);
>  	platform_device_unregister(exynos->usb3_phy);
>  
> +	if (!IS_ERR(exynos->sclk))
> +		clk_disable_unprepare(exynos->sclk);
>  	clk_disable_unprepare(exynos->clk);
>  
>  	regulator_disable(exynos->vdd33);
> @@ -220,6 +232,8 @@ static int dwc3_exynos_suspend(struct device *dev)
>  {
>  	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
>  
> +	if (!IS_ERR(exynos->sclk))
> +		clk_disable(exynos->sclk);
>  	clk_disable(exynos->clk);
>  
>  	regulator_disable(exynos->vdd33);
> @@ -245,6 +259,8 @@ static int dwc3_exynos_resume(struct device *dev)
>  	}
>  
>  	clk_enable(exynos->clk);
> +	if (!IS_ERR(exynos->sclk))
> +		clk_enable(exynos->sclk);
>  
>  	/* runtime set active to reflect active state. */
>  	pm_runtime_disable(dev);
> -- 
> 1.7.10.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

WARNING: multiple messages have this Message-ID (diff)
From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7
Date: Thu, 28 Aug 2014 19:48:47 +0100	[thread overview]
Message-ID: <20140828184847.GA18464@leverpostej> (raw)
In-Reply-To: <1409212920-28526-2-git-send-email-gautam.vivek@samsung.com>

On Thu, Aug 28, 2014 at 09:01:56AM +0100, Vivek Gautam wrote:
> Exynos7 also has a separate special gate clock going to the IP
> apart from the usual AHB clock. So add support for the same.
> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> ---
>  drivers/usb/dwc3/dwc3-exynos.c |   16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
> index f9fb8ad..bab6395 100644
> --- a/drivers/usb/dwc3/dwc3-exynos.c
> +++ b/drivers/usb/dwc3/dwc3-exynos.c
> @@ -35,6 +35,7 @@ struct dwc3_exynos {
>  	struct device		*dev;
>  
>  	struct clk		*clk;
> +	struct clk		*sclk;
>  	struct regulator	*vdd33;
>  	struct regulator	*vdd10;
>  };
> @@ -141,10 +142,17 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> +	/* Exynos7 has a special gate clock going to this IP */
> +	exynos->sclk = devm_clk_get(dev, "usbdrd30_sclk");
> +	if (IS_ERR(exynos->sclk))
> +		dev_warn(dev, "couldn't get sclk\n");

Doesn't this introduce a pointless warning for Exynos SoCs other than
Exynos7?

> +
>  	exynos->dev	= dev;
>  	exynos->clk	= clk;
>  
>  	clk_prepare_enable(exynos->clk);
> +	if (!IS_ERR(exynos->sclk))
> +		clk_prepare_enable(exynos->sclk);

If you replaced the returned err value with NULL you could avoid these
IS_ERR cases.

Mark.

>  
>  	exynos->vdd33 = devm_regulator_get(dev, "vdd33");
>  	if (IS_ERR(exynos->vdd33)) {
> @@ -187,6 +195,8 @@ err4:
>  err3:
>  	regulator_disable(exynos->vdd33);
>  err2:
> +	if (!IS_ERR(exynos->sclk))
> +		clk_disable_unprepare(exynos->sclk);
>  	clk_disable_unprepare(clk);
>  	return ret;
>  }
> @@ -199,6 +209,8 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
>  	platform_device_unregister(exynos->usb2_phy);
>  	platform_device_unregister(exynos->usb3_phy);
>  
> +	if (!IS_ERR(exynos->sclk))
> +		clk_disable_unprepare(exynos->sclk);
>  	clk_disable_unprepare(exynos->clk);
>  
>  	regulator_disable(exynos->vdd33);
> @@ -220,6 +232,8 @@ static int dwc3_exynos_suspend(struct device *dev)
>  {
>  	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
>  
> +	if (!IS_ERR(exynos->sclk))
> +		clk_disable(exynos->sclk);
>  	clk_disable(exynos->clk);
>  
>  	regulator_disable(exynos->vdd33);
> @@ -245,6 +259,8 @@ static int dwc3_exynos_resume(struct device *dev)
>  	}
>  
>  	clk_enable(exynos->clk);
> +	if (!IS_ERR(exynos->sclk))
> +		clk_enable(exynos->sclk);
>  
>  	/* runtime set active to reflect active state. */
>  	pm_runtime_disable(dev);
> -- 
> 1.7.10.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

  reply	other threads:[~2014-08-28 18:48 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-28  8:01 [PATCH 0/5] usb: dwc3/phy-exynos5-usbdrd: Extend support to Exynos7 Vivek Gautam
2014-08-28  8:01 ` Vivek Gautam
2014-08-28  8:01 ` [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7 Vivek Gautam
2014-08-28  8:01   ` Vivek Gautam
2014-08-28 18:48   ` Mark Rutland [this message]
2014-08-28 18:48     ` Mark Rutland
2014-09-02 10:39     ` Vivek Gautam
2014-09-02 10:39       ` Vivek Gautam
2014-09-02 10:39       ` Vivek Gautam
2014-09-02 11:01       ` Mark Rutland
2014-09-02 11:01         ` Mark Rutland
2014-09-02 11:01         ` Mark Rutland
     [not found]       ` <CAFp+6iHLSaUjHqaKXXX0QLiRd3h+O67DRSQdExag-KUH0dnpag-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-02 14:35         ` Felipe Balbi
2014-09-02 14:35           ` Felipe Balbi
2014-09-02 14:35           ` Felipe Balbi
2014-08-28  8:01 ` [PATCH 2/5] phy: exynos5-usbdrd: Add pipe-clk and utmi-clk support Vivek Gautam
2014-08-28  8:01   ` Vivek Gautam
2014-08-28  8:01   ` Vivek Gautam
2014-08-28 18:50   ` Mark Rutland
2014-08-28 18:50     ` Mark Rutland
2014-08-28  8:01 ` [PATCH 3/5] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply Vivek Gautam
2014-08-28  8:01   ` Vivek Gautam
2014-08-28 19:16   ` Felipe Balbi
2014-08-28 19:16     ` Felipe Balbi
2014-08-28 19:16     ` Felipe Balbi
2014-09-01  7:57     ` Vivek Gautam
2014-09-01  7:57       ` Vivek Gautam
2014-08-28  8:01 ` [PATCH 4/5] usb: dwc3: Adding Kconfig dependency for Exynos7 Vivek Gautam
2014-08-28  8:01   ` Vivek Gautam
     [not found]   ` <1409212920-28526-5-git-send-email-gautam.vivek-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-08-28 19:28     ` Felipe Balbi
2014-08-28 19:28       ` Felipe Balbi
2014-08-28 19:28       ` Felipe Balbi
2014-09-03  3:53       ` Vivek Gautam
2014-09-03  3:53         ` Vivek Gautam
2014-08-28  8:02 ` [PATCH 5/5] phy: exynos5-usbdrd: " Vivek Gautam
2014-08-28  8:02   ` Vivek Gautam
2014-08-28 15:06   ` Daniele Forsi
2014-08-28 15:06     ` Daniele Forsi
2014-09-01  8:00     ` Vivek Gautam
2014-09-01  8:00       ` Vivek Gautam
     [not found]       ` <CAFp+6iHsfg6Ru0LBN=JviV=-mSdmuSo9Te3EXYF+X8jssD_BYQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-02 14:37         ` Felipe Balbi
2014-09-02 14:37           ` Felipe Balbi
2014-09-02 14:37           ` Felipe Balbi
2014-09-03  4:02           ` Vivek Gautam
2014-09-03  4:02             ` Vivek Gautam
2014-09-03 14:46             ` Felipe Balbi
2014-09-03 14:46               ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140828184847.GA18464@leverpostej \
    --to=mark.rutland@arm.com \
    --cc=balbi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gautam.vivek@samsung.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kgene.kim@samsung.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.