Re: [PATCH v2 4/4] mfd: rn5t618: document device tree bindings

[Lee Jones <lee.jones@linaro.org>]

On Sat, 30 Aug 2014, Beniamino Galvani wrote:

> This adds the device tree bindings documentation for Ricoh RN5T618.
> 
> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
> Reviewed-by: Mark Brown <broonie@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/rn5t618.txt |   36 +++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rn5t618.txt

Whoops, should have replied to this one instead of the other one
twice.

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
> new file mode 100644
> index 0000000..937785a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
> @@ -0,0 +1,36 @@
> +* Ricoh RN5T618 PMIC
> +
> +Ricoh RN5T618 is a power management IC which integrates 3 step-down
> +DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
> +fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
> +through a I2C interface.
> +
> +Required properties:
> + - compatible: should be "ricoh,rn5t618"
> + - reg: the I2C slave address of the device
> +
> +Sub-nodes:
> + - regulators: the node is required if the regulator functionality is
> +   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
> +   LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
> +   The common bindings for each individual regulator can be found in:
> +   Documentation/devicetree/bindings/regulator/regulator.txt
> +
> +Example:
> +
> +	pmic@32 {
> +		compatible = "ricoh,rn5t618";
> +		reg = <0x32>;
> +
> +		regulators {
> +			DCDC1 {
> +				regulator-min-microvolt = <1050000>;
> +				regulator-max-microvolt = <1050000>;
> +			};
> +
> +			DCDC2 {
> +				regulator-min-microvolt = <1175000>;
> +				regulator-max-microvolt = <1175000>;
> +			};
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html