All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Aring <alex.aring@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
Date: Mon, 1 Sep 2014 11:33:42 +0200	[thread overview]
Message-ID: <20140901093342.GN5352@pengutronix.de> (raw)
In-Reply-To: <20140826142811.GA12155@omega>

On Tue, Aug 26, 2014 at 04:28:13PM +0200, Alexander Aring wrote:
> Hi,
> 
> On Sat, Aug 23, 2014 at 05:19:22PM -0300, Ezequiel Garcia wrote:
> > This commit adds NAND support for the controller present in Kirkwood SoCs.
> > 
> 
> cool! I will test it on my DNS-325 platform, if I find some free time.
> 
> Thanks for doing this.
> 
> > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> > ---
> >  drivers/mtd/nand/Kconfig      |   7 ++
> >  drivers/mtd/nand/Makefile     |   1 +
> >  drivers/mtd/nand/nand_orion.c | 162 ++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 170 insertions(+)
> >  create mode 100644 drivers/mtd/nand/nand_orion.c
> > 
> > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> > index 04fe3c8..ccf1f9c 100644
> > --- a/drivers/mtd/nand/Kconfig
> > +++ b/drivers/mtd/nand/Kconfig
> > @@ -90,6 +90,13 @@ config NAND_OMAP_GPMC
> >  	  Support for NAND flash using GPMC. GPMC is a common memory
> >  	  interface found on Texas Instrument's OMAP platforms
> >  
> > +config NAND_ORION
> > +	bool
> > +	prompt "Orion NAND driver"
> > +	depends on ARCH_MVEBU
> > +	help
> > +	  Support for the Orion NAND controller, present in Kirkwood SoCs.
> > +
> >  config NAND_ATMEL
> >  	bool
> >  	prompt "Atmel (AT91SAM9xxx) NAND driver"
> ...
> > +
> > +static int orion_nand_probe(struct device_d *dev)
> > +{
> > +	struct device_node *dev_node = dev->device_node;
> > +	struct orion_nand *priv;
> > +	struct mtd_info *mtd;
> > +	struct nand_chip *chip;
> > +	struct clk *clk;
> > +	void __iomem *io_base;
> > +	int width, ret;
> > +	u32 val = 0;
> > +
> > +	priv = xzalloc(sizeof(struct orion_nand));
> > +	if (!priv) {
> > +		ret = -ENOMEM;
> > +		goto no_res;
> > +	}
> 
> checking on null with xzalloc isn't needed, if fails we run into panic.

removed the check while applying.

> 
> > +	mtd = &priv->mtd;
> > +	chip = &priv->chip;
> > +
> > +	io_base = dev_request_mem_region(dev, 0);
> > +
> 
> here we should check the return value. I don't know what's now the
> behaviour on dev_request_mem_region if fail returns NULL or ERR_PTR.
> There was some discussion on the list.

It still returns NULL. I have a series converting it to return ERR_PTR,
but this isn't mainlined yet. I'll have to rebase it on current master.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-09-01  9:34 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-23 20:19 [PATCH 0/2] mvebu: Openblocks A6 board support Ezequiel Garcia
2014-08-23 20:19 ` [PATCH 1/2] nand: Add Marvell Orion NAND driver Ezequiel Garcia
2014-08-26 14:09   ` Sebastian Hesselbarth
2014-08-26 16:15     ` Ezequiel Garcia
2014-08-26 18:07       ` Sebastian Hesselbarth
2014-08-26 18:36       ` Sebastian Hesselbarth
2014-08-26 14:28   ` Alexander Aring
2014-08-26 16:06     ` Ezequiel Garcia
2014-09-01  9:33     ` Sascha Hauer [this message]
2014-08-23 20:19 ` [PATCH 2/2] ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support Ezequiel Garcia
2014-08-26 14:10   ` Sebastian Hesselbarth
2014-08-26 14:17 ` [PATCH 0/2] mvebu: " Sebastian Hesselbarth
2014-09-01  9:31 ` Sascha Hauer
2014-09-15 19:33 ` Sebastian Hesselbarth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140901093342.GN5352@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=alex.aring@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.