All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
	barebox@lists.infradead.org
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: Re: [PATCH 2/2] ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support
Date: Tue, 26 Aug 2014 16:10:07 +0200	[thread overview]
Message-ID: <53FC953F.2050009@gmail.com> (raw)
In-Reply-To: <1408825163-6135-3-git-send-email-ezequiel.garcia@free-electrons.com>

On 08/23/2014 10:19 PM, Ezequiel Garcia wrote:
> This commit adds a new Marvell Kirkwood-based board, by following the currently
> supported boards.
>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

> ---
>   arch/arm/boards/Makefile                          |  1 +
>   arch/arm/boards/plathome-openblocks-a6/Makefile   |  2 ++
>   arch/arm/boards/plathome-openblocks-a6/board.c    |  1 +
>   arch/arm/boards/plathome-openblocks-a6/lowlevel.c | 32 +++++++++++++++++++++++
>   arch/arm/dts/Makefile                             |  1 +
>   arch/arm/dts/kirkwood-openblocks_a6-bb.dts        | 13 +++++++++
>   arch/arm/mach-mvebu/Kconfig                       |  3 +++
>   images/Makefile.mvebu                             | 11 ++++++++
>   8 files changed, 64 insertions(+)
>   create mode 100644 arch/arm/boards/plathome-openblocks-a6/Makefile
>   create mode 100644 arch/arm/boards/plathome-openblocks-a6/board.c
>   create mode 100644 arch/arm/boards/plathome-openblocks-a6/lowlevel.c
>   create mode 100644 arch/arm/dts/kirkwood-openblocks_a6-bb.dts
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index c60da81..122f5cd 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -79,6 +79,7 @@ obj-$(CONFIG_MACH_PCM049)			+= phytec-phycore-omap4460/
>   obj-$(CONFIG_MACH_PCM051)			+= phytec-phycore-am335x/
>   obj-$(CONFIG_MACH_PHYTEC_PFLA02)		+= phytec-phyflex-imx6/
>   obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3)	+= plathome-openblocks-ax3/
> +obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6)	+= plathome-openblocks-a6/
>   obj-$(CONFIG_MACH_PM9261)			+= pm9261/
>   obj-$(CONFIG_MACH_PM9263)			+= pm9263/
>   obj-$(CONFIG_MACH_PM9G45)			+= pm9g45/
> diff --git a/arch/arm/boards/plathome-openblocks-a6/Makefile b/arch/arm/boards/plathome-openblocks-a6/Makefile
> new file mode 100644
> index 0000000..01c7a25
> --- /dev/null
> +++ b/arch/arm/boards/plathome-openblocks-a6/Makefile
> @@ -0,0 +1,2 @@
> +obj-y += board.o
> +lwl-y += lowlevel.o
> diff --git a/arch/arm/boards/plathome-openblocks-a6/board.c b/arch/arm/boards/plathome-openblocks-a6/board.c
> new file mode 100644
> index 0000000..40a8c17
> --- /dev/null
> +++ b/arch/arm/boards/plathome-openblocks-a6/board.c
> @@ -0,0 +1 @@
> +/* empty */
> diff --git a/arch/arm/boards/plathome-openblocks-a6/lowlevel.c b/arch/arm/boards/plathome-openblocks-a6/lowlevel.c
> new file mode 100644
> index 0000000..b37a3d6
> --- /dev/null
> +++ b/arch/arm/boards/plathome-openblocks-a6/lowlevel.c
> @@ -0,0 +1,32 @@
> +/*
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <common.h>
> +#include <sizes.h>
> +#include <asm/barebox-arm.h>
> +#include <asm/barebox-arm-head.h>
> +#include <mach/lowlevel.h>
> +
> +extern char __dtb_kirkwood_openblocks_a6_bb_start[];
> +
> +ENTRY_FUNCTION(start_plathome_openblocks_a6, r0, r1, r2)
> +{
> +	void *fdt;
> +
> +	arm_cpu_lowlevel_init();
> +
> +	fdt = __dtb_kirkwood_openblocks_a6_bb_start -
> +		get_runtime_offset();
> +
> +	mvebu_barebox_entry(fdt);
> +}
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 9bff8a0..4b8d58a 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -23,6 +23,7 @@ pbl-dtb-$(CONFIG_MACH_PCM038) += imx27-phytec-phycore-rdk.dtb.o
>   pbl-dtb-$(CONFIG_MACH_PCM051) += am335x-phytec-phycore.dtb.o
>   pbl-dtb-$(CONFIG_MACH_PHYTEC_PFLA02) += imx6s-phytec-pbab01.dtb.o imx6dl-phytec-pbab01.dtb.o imx6q-phytec-pbab01.dtb.o
>   pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
> +pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
>   pbl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
>   pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
>   pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
> diff --git a/arch/arm/dts/kirkwood-openblocks_a6-bb.dts b/arch/arm/dts/kirkwood-openblocks_a6-bb.dts
> new file mode 100644
> index 0000000..42bfb07
> --- /dev/null
> +++ b/arch/arm/dts/kirkwood-openblocks_a6-bb.dts
> @@ -0,0 +1,13 @@
> +/*
> + * Barebox specific DT overlay for OpenBlocks A6 board
> + */
> +
> +#include "arm/kirkwood-openblocks_a6.dts"
> +
> +/ {
> +	gpio-leds {
> +		led-green {
> +			barebox,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index 131f3a6..3270f92 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -81,6 +81,9 @@ if ARCH_KIRKWOOD
>   config MACH_GLOBALSCALE_GURUPLUG
>   	bool "Guruplug"
>
> +config MACH_PLATHOME_OPENBLOCKS_A6
> +	bool "PlatHome OpenBlocks A6"
> +
>   config MACH_USI_TOPKICK
>   	bool "Topkick"
>
> diff --git a/images/Makefile.mvebu b/images/Makefile.mvebu
> index 009807d..5e90855 100644
> --- a/images/Makefile.mvebu
> +++ b/images/Makefile.mvebu
> @@ -72,6 +72,17 @@ image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale-guruplug.img
>   image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale-guruplug-uart.img
>   image-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += barebox-globalscale-guruplug-2nd.img
>
> +PLATHOME_OPENBLOCKS_A6_KWBOPTS = ${KWBOPTS} -i $(board)/plathome-openblocks-a6/kwbimage.cfg
> +OPTS_start_plathome_openblocks_a6.pblx.kwbimg = $(PLATHOME_OPENBLOCKS_A6_KWBOPTS)
> +OPTS_start_plathome_openblocks_a6.pblx.kwbuartimg = -m uart $(PLATHOME_OPENBLOCKS_A6_KWBOPTS)
> +FILE_barebox-plathome-openblocks-a6.img   = start_plathome_openblocks_a6.pblx.kwbimg
> +FILE_barebox-plathome-openblocks-a6-uart.img = start_plathome_openblocks_a6.pblx.kwbuartimg
> +FILE_barebox-plathome-openblocks-a6-2nd.img = start_plathome_openblocks_a6.pblx
> +pblx-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += start_plathome_openblocks_a6
> +image-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += barebox-plathome-openblocks-a6.img
> +image-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += barebox-plathome-openblocks-a6-uart.img
> +image-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += barebox-plathome-openblocks-a6-2nd.img
> +
>   USI_TOPKICK_KWBOPTS = ${KWBOPTS} -i $(board)/usi-topkick/kwbimage.cfg
>   OPTS_start_usi_topkick.pblx.kwbimg = $(USI_TOPKICK_KWBOPTS)
>   OPTS_start_usi_topkick.pblx.kwbuartimg = -m uart $(USI_TOPKICK_KWBOPTS)
>


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-08-26 14:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-23 20:19 [PATCH 0/2] mvebu: Openblocks A6 board support Ezequiel Garcia
2014-08-23 20:19 ` [PATCH 1/2] nand: Add Marvell Orion NAND driver Ezequiel Garcia
2014-08-26 14:09   ` Sebastian Hesselbarth
2014-08-26 16:15     ` Ezequiel Garcia
2014-08-26 18:07       ` Sebastian Hesselbarth
2014-08-26 18:36       ` Sebastian Hesselbarth
2014-08-26 14:28   ` Alexander Aring
2014-08-26 16:06     ` Ezequiel Garcia
2014-09-01  9:33     ` Sascha Hauer
2014-08-23 20:19 ` [PATCH 2/2] ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support Ezequiel Garcia
2014-08-26 14:10   ` Sebastian Hesselbarth [this message]
2014-08-26 14:17 ` [PATCH 0/2] mvebu: " Sebastian Hesselbarth
2014-09-01  9:31 ` Sascha Hauer
2014-09-15 19:33 ` Sebastian Hesselbarth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53FC953F.2050009@gmail.com \
    --to=sebastian.hesselbarth@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=ezequiel.garcia@free-electrons.com \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.