[PATCH 1/2] bcma: move bus struct setup into early part of host specific code

[PATCH 1/2] bcma: move bus struct setup into early part of host specific code

[Rafał Miłecki]

This change is important for SoC host. In future we will want to know
chip ID (needed for early MIPS boot) before doing cores scanning.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
 drivers/bcma/host_pci.c   | 3 +++
 drivers/bcma/host_soc.c   | 3 +++
 drivers/bcma/main.c       | 2 --
 drivers/bcma/scan.c       | 7 -------
 include/linux/bcma/bcma.h | 1 -
 5 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 294a7dd..3251d52 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -208,6 +208,9 @@ static int bcma_host_pci_probe(struct pci_dev *dev,
 	bus->boardinfo.vendor = bus->host_pci->subsystem_vendor;
 	bus->boardinfo.type = bus->host_pci->subsystem_device;
 
+	/* Initialize struct, detect chip */
+	bcma_init_bus(bus);
+
 	/* Register */
 	err = bcma_bus_register(bus);
 	if (err)
diff --git a/drivers/bcma/host_soc.c b/drivers/bcma/host_soc.c
index 1edd7e0..379e0d4e 100644
--- a/drivers/bcma/host_soc.c
+++ b/drivers/bcma/host_soc.c
@@ -178,6 +178,9 @@ int __init bcma_host_soc_register(struct bcma_soc *soc)
 	bus->hosttype = BCMA_HOSTTYPE_SOC;
 	bus->ops = &bcma_host_soc_ops;
 
+	/* Initialize struct, detect chip */
+	bcma_init_bus(bus);
+
 	/* Register */
 	err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
 	if (err)
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 0ff8d58..9f6b0cb 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -334,8 +334,6 @@ int __init bcma_bus_early_register(struct bcma_bus *bus,
 	struct bcma_device *core;
 	struct bcma_device_id match;
 
-	bcma_init_bus(bus);
-
 	match.manuf = BCMA_MANUF_BCM;
 	match.id = bcma_cc_core_id(bus);
 	match.class = BCMA_CL_SIM;
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index e9bd772..e2b9903 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -438,9 +438,6 @@ void bcma_init_bus(struct bcma_bus *bus)
 	s32 tmp;
 	struct bcma_chipinfo *chipinfo = &(bus->chipinfo);
 
-	if (bus->init_done)
-		return;
-
 	INIT_LIST_HEAD(&bus->cores);
 	bus->nr_cores = 0;
 
@@ -452,8 +449,6 @@ void bcma_init_bus(struct bcma_bus *bus)
 	chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
 	bcma_info(bus, "Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
 		  chipinfo->id, chipinfo->rev, chipinfo->pkg);
-
-	bus->init_done = true;
 }
 
 int bcma_bus_scan(struct bcma_bus *bus)
@@ -463,8 +458,6 @@ int bcma_bus_scan(struct bcma_bus *bus)
 
 	int err, core_num = 0;
 
-	bcma_init_bus(bus);
-
 	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
 	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
 		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 0272e49..c1ba87d 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -332,7 +332,6 @@ struct bcma_bus {
 	struct bcma_device *mapped_core;
 	struct list_head cores;
 	u8 nr_cores;
-	u8 init_done:1;
 	u8 num;
 
 	struct bcma_drv_cc drv_cc;
-- 
1.8.4.5

[PATCH 2/2] bcma: use separated function to initialize bus on SoC

[Rafał Miłecki]

This is required to split SoC bus init into two phases. The later one
(which includes scanning) should be called when kalloc is available.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
John: please note this patch touches arch/mips/bcm47xx/setup.c

This patches is a first step of simplifying MIPS booting process on
Broadcom SoCs. My research described in:
> Booting bcm47xx (bcma & stuff), sharing code with bcm53xx
e-mail thread explained how we could get rid of all these early scanning
tricks. The main idea is to postpone bus initialization a bit and use
all standard calls then. So far we were doing it so early we had to
avoid kalloc.
---
 arch/mips/bcm47xx/setup.c     |  4 ++++
 drivers/bcma/host_soc.c       | 11 +++++++++--
 include/linux/bcma/bcma_soc.h |  1 +
 3 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 2b63e7e..fff6ed4 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -202,6 +202,10 @@ static void __init bcm47xx_register_bcma(void)
 
 	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
 	if (err)
+		panic("Failed to register BCMA bus (err %d)", err);
+
+	err = bcma_host_soc_init(&bcm47xx_bus.bcma);
+	if (err)
 		panic("Failed to initialize BCMA bus (err %d)", err);
 
 	bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
diff --git a/drivers/bcma/host_soc.c b/drivers/bcma/host_soc.c
index 379e0d4e..718e054 100644
--- a/drivers/bcma/host_soc.c
+++ b/drivers/bcma/host_soc.c
@@ -165,7 +165,6 @@ static const struct bcma_host_ops bcma_host_soc_ops = {
 int __init bcma_host_soc_register(struct bcma_soc *soc)
 {
 	struct bcma_bus *bus = &soc->bus;
-	int err;
 
 	/* iomap only first core. We have to read some register on this core
 	 * to scan the bus.
@@ -181,7 +180,15 @@ int __init bcma_host_soc_register(struct bcma_soc *soc)
 	/* Initialize struct, detect chip */
 	bcma_init_bus(bus);
 
-	/* Register */
+	return 0;
+}
+
+int __init bcma_host_soc_init(struct bcma_soc *soc)
+{
+	struct bcma_bus *bus = &soc->bus;
+	int err;
+
+	/* Scan bus and initialize it */
 	err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
 	if (err)
 		iounmap(bus->mmio);
diff --git a/include/linux/bcma/bcma_soc.h b/include/linux/bcma/bcma_soc.h
index 4203c55..f24d245 100644
--- a/include/linux/bcma/bcma_soc.h
+++ b/include/linux/bcma/bcma_soc.h
@@ -10,6 +10,7 @@ struct bcma_soc {
 };
 
 int __init bcma_host_soc_register(struct bcma_soc *soc);
+int __init bcma_host_soc_init(struct bcma_soc *soc);
 
 int bcma_bus_register(struct bcma_bus *bus);
 
-- 
1.8.4.5

Re: [PATCH 2/2] bcma: use separated function to initialize bus on SoC

[Hauke Mehrtens]

On 09/01/2014 11:11 PM, Rafał Miłecki wrote:
> This is required to split SoC bus init into two phases. The later one
> (which includes scanning) should be called when kalloc is available.
> 
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Acked-by: Hauke Mehrtens <hauke@hauke-m.de>

> ---
> John: please note this patch touches arch/mips/bcm47xx/setup.c
> 
> This patches is a first step of simplifying MIPS booting process on
> Broadcom SoCs. My research described in:
>> Booting bcm47xx (bcma & stuff), sharing code with bcm53xx
> e-mail thread explained how we could get rid of all these early scanning
> tricks. The main idea is to postpone bus initialization a bit and use
> all standard calls then. So far we were doing it so early we had to
> avoid kalloc.
> ---
>  arch/mips/bcm47xx/setup.c     |  4 ++++
>  drivers/bcma/host_soc.c       | 11 +++++++++--
>  include/linux/bcma/bcma_soc.h |  1 +
>  3 files changed, 14 insertions(+), 2 deletions(-)
> 

Re: [PATCH 2/2] bcma: use separated function to initialize bus on SoC

[John W. Linville]

On Mon, Sep 01, 2014 at 11:11:07PM +0200, Rafał Miłecki wrote:
> This is required to split SoC bus init into two phases. The later one
> (which includes scanning) should be called when kalloc is available.
> 
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
> ---
> John: please note this patch touches arch/mips/bcm47xx/setup.c
> 
> This patches is a first step of simplifying MIPS booting process on
> Broadcom SoCs. My research described in:
> > Booting bcm47xx (bcma & stuff), sharing code with bcm53xx
> e-mail thread explained how we could get rid of all these early scanning
> tricks. The main idea is to postpone bus initialization a bit and use
> all standard calls then. So far we were doing it so early we had to
> avoid kalloc.
> ---
>  arch/mips/bcm47xx/setup.c     |  4 ++++
>  drivers/bcma/host_soc.c       | 11 +++++++++--
>  include/linux/bcma/bcma_soc.h |  1 +
>  3 files changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
> index 2b63e7e..fff6ed4 100644
> --- a/arch/mips/bcm47xx/setup.c
> +++ b/arch/mips/bcm47xx/setup.c
> @@ -202,6 +202,10 @@ static void __init bcm47xx_register_bcma(void)
>  
>  	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
>  	if (err)
> +		panic("Failed to register BCMA bus (err %d)", err);
> +
> +	err = bcma_host_soc_init(&bcm47xx_bus.bcma);
> +	if (err)
>  		panic("Failed to initialize BCMA bus (err %d)", err);
>  
>  	bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);

This hunk looks wrong.  Is it missing indentation?  Or should a line
be removed at the top?

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [PATCH 2/2] bcma: use separated function to initialize bus on SoC

[Rafał Miłecki]

On 4 September 2014 19:38, John W. Linville <linville@tuxdriver.com> wrote:
> On Mon, Sep 01, 2014 at 11:11:07PM +0200, Rafał Miłecki wrote:
>> This is required to split SoC bus init into two phases. The later one
>> (which includes scanning) should be called when kalloc is available.
>>
>> Cc: Ralf Baechle <ralf@linux-mips.org>
>> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
>> ---
>> John: please note this patch touches arch/mips/bcm47xx/setup.c
>>
>> This patches is a first step of simplifying MIPS booting process on
>> Broadcom SoCs. My research described in:
>> > Booting bcm47xx (bcma & stuff), sharing code with bcm53xx
>> e-mail thread explained how we could get rid of all these early scanning
>> tricks. The main idea is to postpone bus initialization a bit and use
>> all standard calls then. So far we were doing it so early we had to
>> avoid kalloc.
>> ---
>>  arch/mips/bcm47xx/setup.c     |  4 ++++
>>  drivers/bcma/host_soc.c       | 11 +++++++++--
>>  include/linux/bcma/bcma_soc.h |  1 +
>>  3 files changed, 14 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
>> index 2b63e7e..fff6ed4 100644
>> --- a/arch/mips/bcm47xx/setup.c
>> +++ b/arch/mips/bcm47xx/setup.c
>> @@ -202,6 +202,10 @@ static void __init bcm47xx_register_bcma(void)
>>
>>       err = bcma_host_soc_register(&bcm47xx_bus.bcma);
>>       if (err)
>> +             panic("Failed to register BCMA bus (err %d)", err);
>> +
>> +     err = bcma_host_soc_init(&bcm47xx_bus.bcma);
>> +     if (err)
>>               panic("Failed to initialize BCMA bus (err %d)", err);
>>
>>       bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
>
> This hunk looks wrong.  Is it missing indentation?  Or should a line
> be removed at the top?

I've just downloaded & applied this patchset on top of wireless-next
successfully... Did you merge something extra from net-next maybe?

-- 
Rafał

Re: [PATCH 2/2] bcma: use separated function to initialize bus on SoC

[John W. Linville]

On Thu, Sep 04, 2014 at 08:04:47PM +0200, Rafał Miłecki wrote:
> On 4 September 2014 19:38, John W. Linville <linville@tuxdriver.com> wrote:
> > On Mon, Sep 01, 2014 at 11:11:07PM +0200, Rafał Miłecki wrote:
> >> This is required to split SoC bus init into two phases. The later one
> >> (which includes scanning) should be called when kalloc is available.
> >>
> >> Cc: Ralf Baechle <ralf@linux-mips.org>
> >> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
> >> ---
> >> John: please note this patch touches arch/mips/bcm47xx/setup.c
> >>
> >> This patches is a first step of simplifying MIPS booting process on
> >> Broadcom SoCs. My research described in:
> >> > Booting bcm47xx (bcma & stuff), sharing code with bcm53xx
> >> e-mail thread explained how we could get rid of all these early scanning
> >> tricks. The main idea is to postpone bus initialization a bit and use
> >> all standard calls then. So far we were doing it so early we had to
> >> avoid kalloc.
> >> ---
> >>  arch/mips/bcm47xx/setup.c     |  4 ++++
> >>  drivers/bcma/host_soc.c       | 11 +++++++++--
> >>  include/linux/bcma/bcma_soc.h |  1 +
> >>  3 files changed, 14 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
> >> index 2b63e7e..fff6ed4 100644
> >> --- a/arch/mips/bcm47xx/setup.c
> >> +++ b/arch/mips/bcm47xx/setup.c
> >> @@ -202,6 +202,10 @@ static void __init bcm47xx_register_bcma(void)
> >>
> >>       err = bcma_host_soc_register(&bcm47xx_bus.bcma);
> >>       if (err)
> >> +             panic("Failed to register BCMA bus (err %d)", err);
> >> +
> >> +     err = bcma_host_soc_init(&bcm47xx_bus.bcma);
> >> +     if (err)
> >>               panic("Failed to initialize BCMA bus (err %d)", err);
> >>
> >>       bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
> >
> > This hunk looks wrong.  Is it missing indentation?  Or should a line
> > be removed at the top?
> 
> I've just downloaded & applied this patchset on top of wireless-next
> successfully... Did you merge something extra from net-next maybe?

I'm looking at the patch itself.  But I think I misread it...

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [PATCH 1/2] bcma: move bus struct setup into early part of host specific code

[Hauke Mehrtens]

On 09/01/2014 11:11 PM, Rafał Miłecki wrote:
> This change is important for SoC host. In future we will want to know
> chip ID (needed for early MIPS boot) before doing cores scanning.
> 
> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Acked-by: Hauke Mehrtens <hauke@hauke-m.de>

> ---
>  drivers/bcma/host_pci.c   | 3 +++
>  drivers/bcma/host_soc.c   | 3 +++
>  drivers/bcma/main.c       | 2 --
>  drivers/bcma/scan.c       | 7 -------
>  include/linux/bcma/bcma.h | 1 -
>  5 files changed, 6 insertions(+), 10 deletions(-)
>