From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/3] clocksource: sh_tmu: Document r8a7779 binding
Date: Sat, 06 Sep 2014 01:21:38 +0000 [thread overview]
Message-ID: <20140906012138.GC16116@verge.net.au> (raw)
In-Reply-To: <7501332.2iGyNsREJQ@avalon>
On Thu, Sep 04, 2014 at 10:00:03AM +0300, Laurent Pinchart wrote:
> Hi Simon,
>
> Thank you for the patch.
>
> On Thursday 04 September 2014 09:55:21 Simon Horman wrote:
> > In general Renesas hardware is not documented to the extent
> > where the relationship between IP blocks on different SoCs can be assumed
> > although they may appear to operate the same way. Furthermore the
> > documentation typically does not specify a version for individual
> > IP blocks. For these reasons a convention of using the SoC name in place
> > of a version and providing SoC-specific compat strings has been adopted.
> >
> > Although not universally liked this convention is used in the bindings
> > for a number of drivers for Renesas hardware. The purpose of this patch is
> > to update the Renesas R-Car Timer Unit (TMU) driver to follow this
> > convention.
> >
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
> >
> > ---
> > * I plan to follow up with a patch patch to use the new binding in the
> > dtsi files for the r8a7779 SoC.
> > commit 471269b790aec03385dc4fb127ed7094ff83c16d
> >
> > v2
> > * Suggestions by Mark Rutland and Sergei Shtylyov
> > - Compatible strings should be "one or more" not "one" of those listed
> > - Describe the generic binding as covering any MTU2 device
> > - Re-order compat strings from most to least specific
> > ---
> > Documentation/devicetree/bindings/timer/renesas,tmu.txt | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index
> > 425d0c5..f9a9545 100644
> > --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > @@ -8,7 +8,9 @@ are independent. The TMU hardware supports up to three
> > channels.
> >
> > Required Properties:
> >
> > - - compatible: must contain "renesas,tmu"
> > + - compatible: must contain one or more of the following:
> > + - "renesas,tmu-r8a7779" R8A7779 TMU
> > + - "renesas,tmu" any TMU
>
> How about matching the wording of patch 1/3 with
>
> - "renesas,tmu-r8a7779" for the R8A7779 TMU
> - "renesas,tmu" for any TMU.
> This is a fallback for the above renesas,tmu-* entries
>
> Same comment for patch 2/3.
>
> With this change,
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks, will do.
WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] clocksource: sh_tmu: Document r8a7779 binding
Date: Sat, 6 Sep 2014 10:21:38 +0900 [thread overview]
Message-ID: <20140906012138.GC16116@verge.net.au> (raw)
In-Reply-To: <7501332.2iGyNsREJQ@avalon>
On Thu, Sep 04, 2014 at 10:00:03AM +0300, Laurent Pinchart wrote:
> Hi Simon,
>
> Thank you for the patch.
>
> On Thursday 04 September 2014 09:55:21 Simon Horman wrote:
> > In general Renesas hardware is not documented to the extent
> > where the relationship between IP blocks on different SoCs can be assumed
> > although they may appear to operate the same way. Furthermore the
> > documentation typically does not specify a version for individual
> > IP blocks. For these reasons a convention of using the SoC name in place
> > of a version and providing SoC-specific compat strings has been adopted.
> >
> > Although not universally liked this convention is used in the bindings
> > for a number of drivers for Renesas hardware. The purpose of this patch is
> > to update the Renesas R-Car Timer Unit (TMU) driver to follow this
> > convention.
> >
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
> >
> > ---
> > * I plan to follow up with a patch patch to use the new binding in the
> > dtsi files for the r8a7779 SoC.
> > commit 471269b790aec03385dc4fb127ed7094ff83c16d
> >
> > v2
> > * Suggestions by Mark Rutland and Sergei Shtylyov
> > - Compatible strings should be "one or more" not "one" of those listed
> > - Describe the generic binding as covering any MTU2 device
> > - Re-order compat strings from most to least specific
> > ---
> > Documentation/devicetree/bindings/timer/renesas,tmu.txt | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index
> > 425d0c5..f9a9545 100644
> > --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > @@ -8,7 +8,9 @@ are independent. The TMU hardware supports up to three
> > channels.
> >
> > Required Properties:
> >
> > - - compatible: must contain "renesas,tmu"
> > + - compatible: must contain one or more of the following:
> > + - "renesas,tmu-r8a7779" R8A7779 TMU
> > + - "renesas,tmu" any TMU
>
> How about matching the wording of patch 1/3 with
>
> - "renesas,tmu-r8a7779" for the R8A7779 TMU
> - "renesas,tmu" for any TMU.
> This is a fallback for the above renesas,tmu-* entries
>
> Same comment for patch 2/3.
>
> With this change,
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks, will do.
WARNING: multiple messages have this Message-ID (diff)
From: Simon Horman <horms@verge.net.au>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Magnus Damm <magnus.damm@gmail.com>,
devicetree@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: Re: [PATCH v2 3/3] clocksource: sh_tmu: Document r8a7779 binding
Date: Sat, 6 Sep 2014 10:21:38 +0900 [thread overview]
Message-ID: <20140906012138.GC16116@verge.net.au> (raw)
In-Reply-To: <7501332.2iGyNsREJQ@avalon>
On Thu, Sep 04, 2014 at 10:00:03AM +0300, Laurent Pinchart wrote:
> Hi Simon,
>
> Thank you for the patch.
>
> On Thursday 04 September 2014 09:55:21 Simon Horman wrote:
> > In general Renesas hardware is not documented to the extent
> > where the relationship between IP blocks on different SoCs can be assumed
> > although they may appear to operate the same way. Furthermore the
> > documentation typically does not specify a version for individual
> > IP blocks. For these reasons a convention of using the SoC name in place
> > of a version and providing SoC-specific compat strings has been adopted.
> >
> > Although not universally liked this convention is used in the bindings
> > for a number of drivers for Renesas hardware. The purpose of this patch is
> > to update the Renesas R-Car Timer Unit (TMU) driver to follow this
> > convention.
> >
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
> >
> > ---
> > * I plan to follow up with a patch patch to use the new binding in the
> > dtsi files for the r8a7779 SoC.
> > commit 471269b790aec03385dc4fb127ed7094ff83c16d
> >
> > v2
> > * Suggestions by Mark Rutland and Sergei Shtylyov
> > - Compatible strings should be "one or more" not "one" of those listed
> > - Describe the generic binding as covering any MTU2 device
> > - Re-order compat strings from most to least specific
> > ---
> > Documentation/devicetree/bindings/timer/renesas,tmu.txt | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index
> > 425d0c5..f9a9545 100644
> > --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
> > @@ -8,7 +8,9 @@ are independent. The TMU hardware supports up to three
> > channels.
> >
> > Required Properties:
> >
> > - - compatible: must contain "renesas,tmu"
> > + - compatible: must contain one or more of the following:
> > + - "renesas,tmu-r8a7779" R8A7779 TMU
> > + - "renesas,tmu" any TMU
>
> How about matching the wording of patch 1/3 with
>
> - "renesas,tmu-r8a7779" for the R8A7779 TMU
> - "renesas,tmu" for any TMU.
> This is a fallback for the above renesas,tmu-* entries
>
> Same comment for patch 2/3.
>
> With this change,
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks, will do.
next prev parent reply other threads:[~2014-09-06 1:21 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-04 0:55 [PATCH v2 0/3] clocksource: Document Renesas SoC specific bindings Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 0:55 ` [PATCH v2 1/3] clocksource: sh_cmt: Document " Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 6:51 ` Laurent Pinchart
2014-09-04 6:51 ` Laurent Pinchart
2014-09-04 6:51 ` Laurent Pinchart
2014-09-04 7:23 ` Simon Horman
2014-09-04 7:23 ` Simon Horman
2014-09-04 6:58 ` Laurent Pinchart
2014-09-04 6:58 ` Laurent Pinchart
2014-09-04 6:58 ` Laurent Pinchart
2014-09-06 1:14 ` Simon Horman
2014-09-06 1:14 ` Simon Horman
2014-09-06 1:14 ` Simon Horman
2014-09-04 0:55 ` [PATCH v2 2/3] clocksource: sh_mtu2: Document r7s72100 binding Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 0:55 ` [PATCH v2 3/3] clocksource: sh_tmu: Document r8a7779 binding Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 0:55 ` Simon Horman
2014-09-04 7:00 ` Laurent Pinchart
2014-09-04 7:00 ` Laurent Pinchart
2014-09-04 7:00 ` Laurent Pinchart
2014-09-06 1:21 ` Simon Horman [this message]
2014-09-06 1:21 ` Simon Horman
2014-09-06 1:21 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140906012138.GC16116@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.