From: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
To: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org>
Cc: bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [resend PATCH 1/3] pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC
Date: Mon, 8 Sep 2014 14:32:35 -0500 [thread overview]
Message-ID: <20140908193235.GA12150@kahuna> (raw)
In-Reply-To: <1410203998-8700-2-git-send-email-mugunthanvnm-l0cyMroinI0@public.gmane.org>
On 00:49-20140909, Mugunthan V N wrote:
> Add pin off modes for dra7 SoC so that during module disable or suspend
> state it can help saving power
>
> Signed-off-by: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org>
> ---
> include/dt-bindings/pinctrl/dra.h | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
> index 002a285..a0ff2d0 100644
> --- a/include/dt-bindings/pinctrl/dra.h
> +++ b/include/dt-bindings/pinctrl/dra.h
> @@ -46,5 +46,13 @@
> #define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
> #define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
>
> +/* Off mode states */
> +#define PIN_OFF_NONE 0
> +#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
> +#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN)
> +#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
> +#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
> +#define PIN_OFF_WAKEUPENABLE WAKEUP_EN
> +
> #endif
NAK for OFF_NONE, OFF_xyz etc.
A) There is no OFF mode on DRA7. in sleep state use mode 15 (gated).
B) when using this for wakeup - use pinctrl wakeup handling to do the
wakeup.
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Mugunthan V N <mugunthanvnm@ti.com>
Cc: <bcousson@baylibre.com>, <tony@atomide.com>,
<devicetree@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [resend PATCH 1/3] pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC
Date: Mon, 8 Sep 2014 14:32:35 -0500 [thread overview]
Message-ID: <20140908193235.GA12150@kahuna> (raw)
In-Reply-To: <1410203998-8700-2-git-send-email-mugunthanvnm@ti.com>
On 00:49-20140909, Mugunthan V N wrote:
> Add pin off modes for dra7 SoC so that during module disable or suspend
> state it can help saving power
>
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
> ---
> include/dt-bindings/pinctrl/dra.h | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
> index 002a285..a0ff2d0 100644
> --- a/include/dt-bindings/pinctrl/dra.h
> +++ b/include/dt-bindings/pinctrl/dra.h
> @@ -46,5 +46,13 @@
> #define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
> #define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
>
> +/* Off mode states */
> +#define PIN_OFF_NONE 0
> +#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
> +#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN)
> +#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
> +#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
> +#define PIN_OFF_WAKEUPENABLE WAKEUP_EN
> +
> #endif
NAK for OFF_NONE, OFF_xyz etc.
A) There is no OFF mode on DRA7. in sleep state use mode 15 (gated).
B) when using this for wakeup - use pinctrl wakeup handling to do the
wakeup.
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-09-08 19:32 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-08 19:19 [resend PATCH 0/3] Add DRA7xx CPSW Ethernet support in Device Tree Mugunthan V N
2014-09-08 19:19 ` Mugunthan V N
2014-09-08 19:19 ` [resend PATCH 1/3] pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC Mugunthan V N
2014-09-08 19:19 ` Mugunthan V N
[not found] ` <1410203998-8700-2-git-send-email-mugunthanvnm-l0cyMroinI0@public.gmane.org>
2014-09-08 19:32 ` Nishanth Menon [this message]
2014-09-08 19:32 ` Nishanth Menon
2014-09-09 9:17 ` Mugunthan V N
2014-09-09 9:17 ` Mugunthan V N
2014-09-08 19:19 ` [resend PATCH 2/3] arm/dts: dra7xx: Add CPSW and MDIO module nodes for dra7xx Mugunthan V N
2014-09-08 19:19 ` Mugunthan V N
2014-09-08 19:19 ` [resend PATCH 3/3] arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM Mugunthan V N
2014-09-08 19:19 ` Mugunthan V N
2014-09-08 19:33 ` Nishanth Menon
2014-09-08 19:33 ` Nishanth Menon
[not found] ` <1410203998-8700-1-git-send-email-mugunthanvnm-l0cyMroinI0@public.gmane.org>
2014-09-08 19:34 ` [resend PATCH 0/3] Add DRA7xx CPSW Ethernet support in Device Tree Nishanth Menon
2014-09-08 19:34 ` Nishanth Menon
2014-09-09 11:29 ` Mugunthan V N
2014-09-09 11:29 ` Mugunthan V N
[not found] ` <540EE4B0.70207-l0cyMroinI0@public.gmane.org>
2014-09-09 12:15 ` Nishanth Menon
2014-09-09 12:15 ` Nishanth Menon
2014-09-09 12:56 ` Mugunthan V N
2014-09-09 13:04 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140908193235.GA12150@kahuna \
--to=nm-l0cymroini0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mugunthanvnm-l0cyMroinI0@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.