Re: [PATCH v4 2/2] DTS: serial: Add bindings documention for the Mediatek UARTs

[Greg KH <gregkh@linuxfoundation.org>]

On Tue, Aug 12, 2014 at 04:12:17PM +0200, Matthias Brugger wrote:
> This patch adds the devicetree documentation for the Mediatek UART.
> 
> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
>  .../devicetree/bindings/serial/mtk-uart.txt        |   20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/mtk-uart.txt
> 
> diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
> new file mode 100644
> index 0000000..6ca0e15
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
> @@ -0,0 +1,20 @@
> +* Mediatek Universal Asynchronous Receiver/Transmitter (UART)
> +
> +Required properties:
> +- compatible: "mediatek,mt6577-uart"
> +  Compatibility with mt6577, mt6589, mt6582
> +
> +- reg: The base address of the UART register bank.
> +
> +- interrupts: A single interrupt specifier.
> +
> +- clocks: Clock driving the hardware.
> +
> +Example:
> +
> +	uart0: serial@11006000 {
> +		compatible = "mediatek,mt6577-uart";
> +		reg = <0x11006000 0x400>;
> +		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&uart_clk>;
> +	};
> -- 
> 1.7.9.5

Resend this one as well with the 1/2 patch please.

thanks,

greg k-h