From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Johan Hovold <johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Octavian Purdila
<octavian.purdila-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
daniel.baluta-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
Date: Wed, 17 Sep 2014 08:46:53 -0700 [thread overview]
Message-ID: <20140917154653.GF30918@lee--X1> (raw)
In-Reply-To: <20140917091001.GF20727@localhost>
On Wed, 17 Sep 2014, Johan Hovold wrote:
> On Tue, Sep 09, 2014 at 10:24:44PM +0300, Octavian Purdila wrote:
> > This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
> > Master Adapter DLN-2. Details about the device can be found here:
> >
> > https://www.diolan.com/i2c/i2c_interface.html.
> >
> > Information about the USB protocol can be found in the Programmer's
> > Reference Manual [1], see section 1.7.
> >
> > Because the hardware has a single transmit endpoint and a single
> > receive endpoint the communication between the various DLN2 drivers
> > and the hardware will be muxed/demuxed by this driver.
> >
> > Each DLN2 module will be identified by the handle field within the DLN2
> > message header. If a DLN2 module issues multiple commands in parallel
> > they will be identified by the echo counter field in the message header.
> >
> > The DLN2 modules can use the dln2_transfer() function to issue a
> > command and wait for its response. They can also register a callback
> > that is going to be called when a specific event id is generated by
> > the device (e.g. GPIO interrupts). The device uses handle 0 for
> > sending events.
> >
> > [1] https://www.diolan.com/downloads/dln-api-manual.pdf
> >
> > Signed-off-by: Octavian Purdila <octavian.purdila-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> > ---
> > drivers/mfd/Kconfig | 9 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/dln2.c | 681 +++++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/dln2.h | 71 +++++
> > 4 files changed, 762 insertions(+)
> > create mode 100644 drivers/mfd/dln2.c
> > create mode 100644 include/linux/mfd/dln2.h
[...]
> Unless anyone suggests otherwise (e.g. to stick with auto id), I'll add
> a helper function for this and fix up those two drivers.
Appreciated.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Johan Hovold <johan@kernel.org>
Cc: Octavian Purdila <octavian.purdila@intel.com>,
gregkh@linuxfoundation.org, linus.walleij@linaro.org,
gnurou@gmail.com, wsa@the-dreams.de, sameo@linux.intel.com,
arnd@arndb.de, daniel.baluta@intel.com,
laurentiu.palcu@intel.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-i2c@vger.kernel.org
Subject: Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
Date: Wed, 17 Sep 2014 08:46:53 -0700 [thread overview]
Message-ID: <20140917154653.GF30918@lee--X1> (raw)
In-Reply-To: <20140917091001.GF20727@localhost>
On Wed, 17 Sep 2014, Johan Hovold wrote:
> On Tue, Sep 09, 2014 at 10:24:44PM +0300, Octavian Purdila wrote:
> > This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
> > Master Adapter DLN-2. Details about the device can be found here:
> >
> > https://www.diolan.com/i2c/i2c_interface.html.
> >
> > Information about the USB protocol can be found in the Programmer's
> > Reference Manual [1], see section 1.7.
> >
> > Because the hardware has a single transmit endpoint and a single
> > receive endpoint the communication between the various DLN2 drivers
> > and the hardware will be muxed/demuxed by this driver.
> >
> > Each DLN2 module will be identified by the handle field within the DLN2
> > message header. If a DLN2 module issues multiple commands in parallel
> > they will be identified by the echo counter field in the message header.
> >
> > The DLN2 modules can use the dln2_transfer() function to issue a
> > command and wait for its response. They can also register a callback
> > that is going to be called when a specific event id is generated by
> > the device (e.g. GPIO interrupts). The device uses handle 0 for
> > sending events.
> >
> > [1] https://www.diolan.com/downloads/dln-api-manual.pdf
> >
> > Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
> > ---
> > drivers/mfd/Kconfig | 9 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/dln2.c | 681 +++++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/dln2.h | 71 +++++
> > 4 files changed, 762 insertions(+)
> > create mode 100644 drivers/mfd/dln2.c
> > create mode 100644 include/linux/mfd/dln2.h
[...]
> Unless anyone suggests otherwise (e.g. to stick with auto id), I'll add
> a helper function for this and fix up those two drivers.
Appreciated.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-09-17 15:46 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-09 19:24 [PATCH v4 0/3] mfd: add support for Diolan DLN-2 Octavian Purdila
2014-09-09 19:24 ` [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices Octavian Purdila
2014-09-16 23:21 ` Lee Jones
2014-09-17 7:25 ` Octavian Purdila
[not found] ` <CAE1zotJWUnduPUd9C8EgSHHSo-OCgdj7c-sKaT5M2Ajj2CmNWw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-17 7:38 ` Johan Hovold
2014-09-17 7:38 ` Johan Hovold
2014-09-17 15:56 ` Lee Jones
2014-09-17 9:10 ` Johan Hovold
2014-09-17 15:46 ` Lee Jones [this message]
2014-09-17 15:46 ` Lee Jones
[not found] ` <1410290686-6680-2-git-send-email-octavian.purdila-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-09-18 11:31 ` Johan Hovold
2014-09-18 11:31 ` Johan Hovold
2014-09-18 14:21 ` Johan Hovold
2014-09-18 14:21 ` Johan Hovold
2014-09-09 19:24 ` [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter Octavian Purdila
2014-09-17 9:44 ` Johan Hovold
2014-09-17 10:07 ` Octavian Purdila
2014-09-17 10:07 ` Octavian Purdila
2014-09-18 8:19 ` Johan Hovold
2014-09-18 8:49 ` Octavian Purdila
2014-09-18 9:13 ` Johan Hovold
2014-09-09 19:24 ` [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver Octavian Purdila
2014-09-18 10:54 ` Johan Hovold
2014-09-18 12:43 ` Octavian Purdila
2014-09-18 12:46 ` Johan Hovold
2014-09-18 15:54 ` Octavian Purdila
[not found] ` <CAE1zotK7nb6VVp5a3n2_fnWZQHfizg4hFFy-ZVW5fzyFwmBMcA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-19 7:11 ` Johan Hovold
2014-09-19 7:11 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140917154653.GF30918@lee--X1 \
--to=lee.jones-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=daniel.baluta-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=octavian.purdila-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.