All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolin Chen <nicoleotsuka@gmail.com>
To: Michael Trimarchi <michael@amarulasolutions.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Shengjiu Wang <shengjiu.wang@freescale.com>,
	Markus Pargmann <mpa@pengutronix.de>,
	Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>,
	Fabio Estevam <festevam@gmail.com>,
	Shawn Guo <shawn.guo@freescale.com>
Subject: Re: No sound captured with SGTL5000 on i.MX6 in I²S master mode
Date: Thu, 18 Sep 2014 11:13:38 -0700	[thread overview]
Message-ID: <20140918181338.GD6432@Asurada> (raw)
In-Reply-To: <20140918180331.GA19033@panicking>

On Thu, Sep 18, 2014 at 08:03:31PM +0200, Michael Trimarchi wrote:
> > Ah, this is a problem. We should not use ssi_private->pdev->dev here.
> > I think it'll be better if adding a new parameter of *dev pointer to
> > this _set_dai_fmt() -- passing pdev->dev in probe() and cpu_dai->dev
> > in fsl_ssi_set_dai_fmt().
> > 
> 
> Somenthing like this?

Yes, would you like to send a separate patch? I think other people
and maintainers'd like to take a look at it and decide if it's a
good shoot. I'll also take a further look at it after I finish my
laundry :)

Thank you
Nicolin

> 
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index 87eb577..de6ab06 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -748,8 +748,9 @@ static int fsl_ssi_hw_free(struct snd_pcm_substream *substream,
>  	return 0;
>  }
>  
> -static int _fsl_ssi_set_dai_fmt(struct fsl_ssi_private *ssi_private,
> -		unsigned int fmt)
> +static int _fsl_ssi_set_dai_fmt(struct device *dev,
> +				struct fsl_ssi_private *ssi_private,
> +				unsigned int fmt)
>  {
>  	struct regmap *regs = ssi_private->regs;
>  	u32 strcr = 0, stcr, srcr, scr, mask;
> @@ -758,7 +759,7 @@ static int _fsl_ssi_set_dai_fmt(struct fsl_ssi_private *ssi_private,
>  	ssi_private->dai_fmt = fmt;
>  
>  	if (fsl_ssi_is_i2s_master(ssi_private) && IS_ERR(ssi_private->baudclk)) {
> -		dev_err(&ssi_private->pdev->dev, "baudclk is missing which is necessary for master mode\n");
> +		dev_err(dev, "baudclk is missing which is necessary for master mode\n");
>  		return -EINVAL;
>  	}
>  
> @@ -913,7 +914,7 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
>  {
>  	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
>  
> -	return _fsl_ssi_set_dai_fmt(ssi_private, fmt);
> +	return _fsl_ssi_set_dai_fmt(cpu_dai->dev, ssi_private, fmt);
>  }
>  
>  /**
> @@ -1387,7 +1388,8 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>  
>  done:
>  	if (ssi_private->dai_fmt)
> -		_fsl_ssi_set_dai_fmt(ssi_private, ssi_private->dai_fmt);
> +		_fsl_ssi_set_dai_fmt(&pdev->dev, ssi_private,
> +				     ssi_private->dai_fmt);
>  
>  	return 0;
>  
> > Nicolin
> 
> -- 
> | Michael Nazzareno Trimarchi                     Amarula Solutions BV |
> | COO  -  Founder                                      Cruquiuskade 47 |
> | +31(0)851119172                                 Amsterdam 1018 AM NL |
> |                  [`as] http://www.amarulasolutions.com               |

  reply	other threads:[~2014-09-18 18:13 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-18 12:56 No sound captured with SGTL5000 on i.MX6 in I²S master mode Jean-Michel Hautbois
2014-09-18 13:30 ` Fabio Estevam
2014-09-18 13:35   ` Michael Trimarchi
2014-09-18 13:45     ` Jean-Michel Hautbois
2014-09-18 13:55       ` Michael Trimarchi
2014-09-18 14:09         ` Jean-Michel Hautbois
2014-09-18 16:09           ` Jean-Michel Hautbois
2014-09-18 17:05             ` Nicolin Chen
2014-09-18 17:26               ` Michael Trimarchi
2014-09-18 17:45                 ` Nicolin Chen
2014-09-18 18:03                   ` Michael Trimarchi
2014-09-18 18:13                     ` Nicolin Chen [this message]
2014-09-18 18:18                       ` Michael Trimarchi
2014-09-18 17:28               ` Fabio Estevam
2014-09-18 17:49                 ` Nicolin Chen
2014-09-18 17:58                   ` Fabio Estevam
2014-09-18 18:07                     ` Nicolin Chen
2014-09-18 18:14                       ` Fabio Estevam
2014-09-18 18:39                         ` Nicolin Chen
2014-09-18 23:35                           ` Fabio Estevam
2014-09-18 23:50                             ` Nicolin Chen
2014-09-19  7:42                               ` Jean-Michel Hautbois
2014-09-19  7:52                                 ` Nicolin Chen
2014-09-19  9:18                                   ` Jean-Michel Hautbois
2014-09-19 12:53                                     ` Jean-Michel Hautbois
2014-10-09 14:02                                       ` Jean-Michel Hautbois
2014-10-09 14:18                                         ` Fabio Estevam
2014-10-09 14:26                                           ` Jean-Michel Hautbois
2014-10-09 15:06                                             ` Fabio Estevam
2014-10-09 15:14                                               ` Jean-Michel Hautbois
2014-10-09 15:19                                                 ` Fabio Estevam
2014-10-10 15:49                                                   ` Jean-Michel Hautbois
2014-10-10 15:54                                                     ` Fabio Estevam
2014-09-22  3:26                       ` Fabio Estevam
2014-09-22  3:41                         ` Nicolin Chen
2014-09-18 17:19   ` Nicolin Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140918181338.GD6432@Asurada \
    --to=nicoleotsuka@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=festevam@gmail.com \
    --cc=jean-michel.hautbois@vodalys.com \
    --cc=lars@metafoo.de \
    --cc=michael@amarulasolutions.com \
    --cc=mpa@pengutronix.de \
    --cc=shawn.guo@freescale.com \
    --cc=shengjiu.wang@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.