From: Fengguang Wu <fengguang.wu@intel.com>
To: lkp@lists.01.org
Subject: [PCI/MSI] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
Date: Thu, 25 Sep 2014 11:04:59 +0800 [thread overview]
Message-ID: <20140925030459.GB13564@localhost> (raw)
[-- Attachment #1: Type: text/plain, Size: 3528 bytes --]
Hi Alexander,
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
commit 4ab2ee7c77875669230a797a3ed2228990f82545 ("PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()")
+-----------------------------------------------------+------------+------------+
| | 888215f389 | 4ab2ee7c77 |
+-----------------------------------------------------+------------+------------+
| boot_successes | 15 | 2 |
| early-boot-hang | 1 | |
| boot_failures | 0 | 13 |
| WARNING:at_drivers/pci/msi.c:pci_enable_msi_range() | 0 | 5 |
| WARNING:at_fs/sysfs/dir.c:sysfs_warn_dup() | 0 | 5 |
| backtrace:ip_auto_config | 0 | 5 |
| backtrace:kernel_init_freeable | 0 | 5 |
| BUG:kernel_test_crashed | 0 | 8 |
+-----------------------------------------------------+------------+------------+
[ 5.410055] evm: HMAC attrs: 0x1
[ 5.413893] rtc_cmos 00:01: setting system clock to 2014-09-25 00:13:24 UTC (1411604004)
[ 5.447469] ------------[ cut here ]------------
[ 5.452212] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 5.462479] Modules linked in:
[ 5.465712] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.473467] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.480202] 0000000000000009 ffff880139ab7c00 ffffffff8185b75a 0000000000000000
[ 5.488043] ffff880139ab7c38 ffffffff8107056d 0000000000000001 ffff88007f8ec000
[ 5.495879] ffff88013974e098 ffff88013974e000 ffff88007f8ecdb8 ffff880139ab7c48
[ 5.503722] Call Trace:
[ 5.506293] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.511552] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.517675] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 5.523631] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 5.529932] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 5.535368] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.540712] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.546754] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.552534] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.558314] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.564529] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.569876] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.576091] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 5.581871] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 5.587826] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 5.593436] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 5.599735] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.605079] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 5.610341] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 5.615861] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.621207] ---[ end trace 3e09fff841f00690 ]---
[ 5.625958] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X
Thanks,
Fengguang
_______________________________________________
LKP mailing list
LKP(a)linux.intel.com
[-- Attachment #2: dmesg.ksh --]
[-- Type: text/plain, Size: 92195 bytes --]
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.17.0-rc2-00011-g4ab2ee7 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP Thu Sep 25 00:06:22 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff60000-0x00000000bff68fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff69000-0x00000000bff7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF80000 mask FFFF80000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbff80000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbff60 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f58f0-0x000f58ff] mapped at [ffff8800000f58f0]
[ 0.000000] mpc: 9e171-9e33d
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02184000, 0x02184fff] PGTABLE
[ 0.000000] BRK [0x02185000, 0x02185fff] PGTABLE
[ 0.000000] BRK [0x02186000, 0x02186fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x02187000, 0x02187fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff5ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff5ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x78805000-0x7fff2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F58C0 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x00000000BFF64382 00003C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF68E48 000074 (v01 INTEL TUMWATER 06040000 PTL 00000003)
[ 0.000000] ACPI: DSDT 0x00000000BFF64A6A 0043DE (v01 Intel BLAKFORD 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BFF69FC0 000040
[ 0.000000] ACPI: APIC 0x00000000BFF68EBC 000090 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x00000000BFF68F4C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFF68F88 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 0x00000000BFF68FB0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFF643BE 0006AC (v01 DpgPmm CpuPm 00000012 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13ffd7000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbff5ffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12222 pages used for memmap
[ 0.000000] DMA32 zone: 782176 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec80000)
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff60000-0xbff68fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff69000-0xbff7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff80000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s88960 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s88960 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031913
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3919940K/4193264K available (8613K kernel code, 1703K rwdata, 3868K rodata, 1804K init, 1888K bss, 273324K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:864 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.17.0-rc2-00011-g4ab2ee7 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP Thu Sep 25 00:06:22 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff60000-0x00000000bff68fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff69000-0x00000000bff7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF80000 mask FFFF80000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbff80000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbff60 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f58f0-0x000f58ff] mapped at [ffff8800000f58f0]
[ 0.000000] mpc: 9e171-9e33d
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02184000, 0x02184fff] PGTABLE
[ 0.000000] BRK [0x02185000, 0x02185fff] PGTABLE
[ 0.000000] BRK [0x02186000, 0x02186fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x02187000, 0x02187fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff5ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff5ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x78805000-0x7fff2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F58C0 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x00000000BFF64382 00003C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF68E48 000074 (v01 INTEL TUMWATER 06040000 PTL 00000003)
[ 0.000000] ACPI: DSDT 0x00000000BFF64A6A 0043DE (v01 Intel BLAKFORD 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BFF69FC0 000040
[ 0.000000] ACPI: APIC 0x00000000BFF68EBC 000090 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x00000000BFF68F4C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFF68F88 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 0x00000000BFF68FB0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFF643BE 0006AC (v01 DpgPmm CpuPm 00000012 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13ffd7000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbff5ffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12222 pages used for memmap
[ 0.000000] DMA32 zone: 782176 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec80000)
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff60000-0xbff68fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff69000-0xbff7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff80000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s88960 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s88960 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031913
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3919940K/4193264K available (8613K kernel code, 1703K rwdata, 3868K rodata, 1804K init, 1888K bss, 273324K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:864 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.409 MHz processor
[ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.81 BogoMIPS (lpj=2666409)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] ACPI: Core revision 20140724
[ 0.001000] ACPI: All ACPI Tables successfully acquired
[ 0.001000] Security Framework initialized
[ 0.001000] SELinux: Initializing.
[ 0.001000] SELinux: Starting in permissive mode
[ 0.001000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001000] Initializing cgroup subsys memory
[ 0.001000] Initializing cgroup subsys devices
[ 0.001000] Initializing cgroup subsys freezer
[ 0.001000] Initializing cgroup subsys net_cls
[ 0.001000] Initializing cgroup subsys blkio
[ 0.001000] Initializing cgroup subsys perf_event
[ 0.001000] Initializing cgroup subsys hugetlb
[ 0.001000] CPU: Physical Processor ID: 0
[ 0.001000] CPU: Processor Core ID: 0
[ 0.001000] mce: CPU supports 6 MCE banks
[ 0.001000] CPU0: Thermal monitoring handled by SMI
[ 0.001000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.001000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.001000] Freeing SMP alternatives memory: 36K (ffffffff81fa1000 - ffffffff81faa000)
[ 0.001000] ftrace: allocating 31169 entries in 122 pages
[ 0.001000] Getting VERSION: 50014
[ 0.001000] Getting VERSION: 50014
[ 0.001000] Getting ID: 0
[ 0.001000] Getting ID: 0
[ 0.001000] masked ExtINT on CPU#0
[ 0.001000] ENABLING IO-APIC IRQs
[ 0.001000] init IO_APIC IRQs
[ 0.001000] apic 2 pin 0 not connected
[ 0.001000] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.001000] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.001000] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.001013] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.002005] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
[ 0.003005] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.004004] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.005004] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.006005] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.007005] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
[ 0.008005] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
[ 0.009005] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.010005] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.011005] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.012005] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.013003] apic 2 pin 16 not connected
[ 0.014001] apic 2 pin 17 not connected
[ 0.015001] apic 2 pin 18 not connected
[ 0.016001] apic 2 pin 19 not connected
[ 0.017001] apic 2 pin 20 not connected
[ 0.018001] apic 2 pin 21 not connected
[ 0.019001] apic 2 pin 22 not connected
[ 0.020001] apic 2 pin 23 not connected
[ 0.021001] apic 3 pin 0 not connected
[ 0.022001] apic 3 pin 1 not connected
[ 0.023001] apic 3 pin 2 not connected
[ 0.024001] apic 3 pin 3 not connected
[ 0.025001] apic 3 pin 4 not connected
[ 0.026001] apic 3 pin 5 not connected
[ 0.027001] apic 3 pin 6 not connected
[ 0.028001] apic 3 pin 7 not connected
[ 0.029001] apic 3 pin 8 not connected
[ 0.030001] apic 3 pin 9 not connected
[ 0.031001] apic 3 pin 10 not connected
[ 0.032001] apic 3 pin 11 not connected
[ 0.033001] apic 3 pin 12 not connected
[ 0.034001] apic 3 pin 13 not connected
[ 0.035001] apic 3 pin 14 not connected
[ 0.036001] apic 3 pin 15 not connected
[ 0.037001] apic 3 pin 16 not connected
[ 0.038001] apic 3 pin 17 not connected
[ 0.039001] apic 3 pin 18 not connected
[ 0.040001] apic 3 pin 19 not connected
[ 0.041001] apic 3 pin 20 not connected
[ 0.042001] apic 3 pin 21 not connected
[ 0.043001] apic 3 pin 22 not connected
[ 0.044001] apic 3 pin 23 not connected
[ 0.045134] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056782] smpboot: CPU0: Genuine Intel(R) CPU @ 2.66GHz (fam: 06, model: 0f, stepping: 04)
[ 0.060002] Using local APIC timer interrupts.
[ 0.060002] calibrating APIC timer ...
[ 0.062000] ... lapic delta = 2083020
[ 0.062000] ... PM-Timer delta = 357900
[ 0.062000] ... PM-Timer result ok
[ 0.062000] ..... delta 2083020
[ 0.062000] ..... mult: 89465027
[ 0.062000] ..... calibration result: 333283
[ 0.062000] ..... CPU clock speed is 2666.0264 MHz.
[ 0.062000] ..... host bus clock speed is 333.0283 MHz.
[ 0.062041] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.067001] perf_event_intel: PEBS disabled due to CPU errata
[ 0.068003] ... version: 2
[ 0.069001] ... bit width: 40
[ 0.070001] ... generic registers: 2
[ 0.071001] ... value mask: 000000ffffffffff
[ 0.072001] ... max period: 000000007fffffff
[ 0.073001] ... fixed-purpose events: 3
[ 0.074001] ... event mask: 0000000700000003
[ 0.077867] x86: Booting SMP configuration:
[ 0.078003] .... node #0, CPUs: #1
[ 0.077746] masked ExtINT on CPU#1
[ 0.077746] CPU1: Thermal monitoring handled by SMI
[ 0.160140] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.161134] #2
[ 0.161020] masked ExtINT on CPU#2
[ 0.161020] CPU2: Thermal monitoring handled by SMI
[ 0.183204] #3
[ 0.183042] masked ExtINT on CPU#3
[ 0.183042] CPU3: Thermal monitoring handled by SMI
[ 0.205013] x86: Booted up 1 node, 4 CPUs
[ 0.206003] smpboot: Total of 4 processors activated (21330.84 BogoMIPS)
[ 0.209139] devtmpfs: initialized
[ 0.214253] evm: security.selinux
[ 0.215001] evm: security.ima
[ 0.216001] evm: security.capability
[ 0.217116] PM: Registering ACPI NVS region [mem 0xbff69000-0xbff7ffff] (94208 bytes)
[ 0.220109] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.221130] NET: Registered protocol family 16
[ 0.223151] cpuidle: using governor menu
[ 0.224139] ACPI: bus type PCI registered
[ 0.225002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.226077] PCI: MMCONFIG for domain 0000 [bus 00-0a] at [mem 0xe0000000-0xe0afffff] (base 0xe0000000)
[ 0.227003] PCI: MMCONFIG at [mem 0xe0000000-0xe0afffff] reserved in E820
[ 0.228032] PCI: Using configuration type 1 for base access
[ 0.232085] ACPI: Added _OSI(Module Device)
[ 0.233003] ACPI: Added _OSI(Processor Device)
[ 0.234001] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.235002] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237987] ACPI: Interpreter enabled
[ 0.238011] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.241002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140724/hwxface-580)
[ 0.244008] ACPI: (supports S0 S1 S4 S5)
[ 0.245001] ACPI: Using IOAPIC for interrupt routing
[ 0.246022] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.251175] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.252006] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
[ 0.253005] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.254708] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.255003] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.256002] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.257002] acpi PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.258002] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.259002] acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.260002] acpi PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.261002] acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xfdffffff] (ignored)
[ 0.262002] PCI: root bus 00: using default resources
[ 0.263003] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0a] only partially covers this bridge
[ 0.264103] PCI host bridge to bus 0000:00
[ 0.265003] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.266002] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.267002] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.268013] pci 0000:00:00.0: [8086:25d8] type 00 class 0x060000
[ 0.269048] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.270073] pci 0000:00:02.0: [8086:25f7] type 01 class 0x060400
[ 0.271042] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.272074] pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
[ 0.273042] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.274030] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.275050] pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
[ 0.276042] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.277028] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.278046] pci 0000:00:08.0: [8086:1a38] type 00 class 0x088000
[ 0.279011] pci 0000:00:08.0: reg 0x10: [mem 0xfe700000-0xfe7003ff 64bit]
[ 0.280038] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.281068] pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
[ 0.283065] pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
[ 0.284331] pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
[ 0.285075] pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
[ 0.286068] pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
[ 0.287071] pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
[ 0.288073] pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
[ 0.289080] pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
[ 0.290072] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.291033] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.292051] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
[ 0.293038] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
[ 0.294057] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.295046] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
[ 0.296038] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
[ 0.297059] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.298046] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
[ 0.299037] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
[ 0.300058] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.301054] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
[ 0.302019] pci 0000:00:1d.7: reg 0x10: [mem 0xc8000000-0xc80003ff]
[ 0.303077] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.304031] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.305046] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.306069] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.307046] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
[ 0.308071] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.309072] pci 0000:00:1f.2: [8086:2680] type 00 class 0x010180
[ 0.310014] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.311008] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.312007] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.313008] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.314008] pci 0000:00:1f.2: reg 0x20: [io 0x1870-0x187f]
[ 0.315015] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.316002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.317002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.318002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.319019] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.320064] pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
[ 0.321048] pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
[ 0.322140] pci 0000:01:00.0: [8086:3500] type 01 class 0x060400
[ 0.323061] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.325012] pci 0000:01:00.3: [8086:350c] type 01 class 0x060400
[ 0.326056] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
[ 0.327021] pci 0000:01:00.3: System wakeup disabled by ACPI
[ 0.328044] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.329009] pci 0000:00:02.0: PCI bridge to [bus 01-07]
[ 0.330003] pci 0000:00:02.0: bridge window [io 0x2000-0x3fff]
[ 0.331003] pci 0000:00:02.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.332004] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.333069] pci 0000:02:00.0: [8086:3510] type 01 class 0x060400
[ 0.335034] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.336057] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.337011] pci 0000:02:02.0: [8086:3518] type 01 class 0x060400
[ 0.338063] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.339022] pci 0000:02:02.0: System wakeup disabled by ACPI
[ 0.340039] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.341024] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[ 0.342004] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 0.343003] pci 0000:01:00.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.344005] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.345068] pci 0000:03:00.0: [8086:0329] type 01 class 0x060400
[ 0.346020] pci 0000:03:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.347069] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.348027] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.349049] pci 0000:03:00.2: [8086:032a] type 01 class 0x060400
[ 0.350020] pci 0000:03:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.351069] pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
[ 0.352024] pci 0000:03:00.2: System wakeup disabled by ACPI
[ 0.353044] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.354009] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.355003] pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
[ 0.356003] pci 0000:02:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.357005] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.358066] pci 0000:04:02.0: [9005:801d] type 00 class 0x010000
[ 0.359024] pci 0000:04:02.0: reg 0x10: [io 0x2400-0x24ff]
[ 0.360014] pci 0000:04:02.0: reg 0x14: [mem 0xc8100000-0xc8101fff 64bit]
[ 0.361010] pci 0000:04:02.0: reg 0x1c: [io 0x2000-0x20ff]
[ 0.362025] pci 0000:04:02.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.363097] pci 0000:04:02.1: [9005:801d] type 00 class 0x010000
[ 0.364021] pci 0000:04:02.1: reg 0x10: [io 0x2c00-0x2cff]
[ 0.365014] pci 0000:04:02.1: reg 0x14: [mem 0xc8102000-0xc8103fff 64bit]
[ 0.366010] pci 0000:04:02.1: reg 0x1c: [io 0x2800-0x28ff]
[ 0.367025] pci 0000:04:02.1: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.368123] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.369004] pci 0000:03:00.0: bridge window [io 0x2000-0x2fff]
[ 0.370004] pci 0000:03:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.371005] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.372089] pci 0000:03:00.2: PCI bridge to [bus 05]
[ 0.373079] pci 0000:06:00.0: [8086:1096] type 00 class 0x020000
[ 0.374016] pci 0000:06:00.0: reg 0x10: [mem 0xc8220000-0xc823ffff]
[ 0.375010] pci 0000:06:00.0: reg 0x14: [mem 0xc8200000-0xc821ffff]
[ 0.376010] pci 0000:06:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.377033] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.378048] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.379068] pci 0000:06:00.1: [8086:1096] type 00 class 0x020000
[ 0.380016] pci 0000:06:00.1: reg 0x10: [mem 0xc8260000-0xc827ffff]
[ 0.381010] pci 0000:06:00.1: reg 0x14: [mem 0xc8240000-0xc825ffff]
[ 0.382010] pci 0000:06:00.1: reg 0x18: [io 0x3020-0x303f]
[ 0.384008] pci 0000:06:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.385048] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 0.386063] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.387012] pci 0000:02:02.0: PCI bridge to [bus 06]
[ 0.388004] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
[ 0.389003] pci 0000:02:02.0: bridge window [mem 0xc8200000-0xc82fffff]
[ 0.390005] pci 0000:02:02.0: bridge window [mem 0xc0100000-0xc01fffff 64bit pref]
[ 0.391089] pci 0000:01:00.3: PCI bridge to [bus 07]
[ 0.392050] pci 0000:00:04.0: PCI bridge to [bus 08]
[ 0.393044] pci 0000:00:06.0: PCI bridge to [bus 09]
[ 0.394055] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 0.395004] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.396004] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.397005] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.398044] pci 0000:0b:01.0: [1002:515e] type 00 class 0x030000
[ 0.399017] pci 0000:0b:01.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.400010] pci 0000:0b:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.401010] pci 0000:0b:01.0: reg 0x18: [mem 0xc8300000-0xc830ffff]
[ 0.402033] pci 0000:0b:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.403028] pci 0000:0b:01.0: supports D1 D2
[ 0.404075] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
[ 0.405004] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.406004] pci 0000:00:1e.0: bridge window [mem 0xc8300000-0xc83fffff]
[ 0.407005] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.408002] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.409002] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.410019] pci 0000:01:00.0: Max Payload Size 128, but upstream 0000:00:02.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.411004] pci 0000:02:00.0: Max Payload Size 256, but upstream 0000:01:00.0 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.412267] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15), disabled.
[ 0.417345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15), disabled.
[ 0.422048] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15), disabled.
[ 0.427346] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15), disabled.
[ 0.432346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.437346] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.441344] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.447043] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.453338] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.454002] vgaarb: loaded
[ 0.455001] vgaarb: bridge control possible 0000:0b:01.0
[ 0.457008] SCSI subsystem initialized
[ 0.458041] ACPI: bus type USB registered
[ 0.459031] usbcore: registered new interface driver usbfs
[ 0.460013] usbcore: registered new interface driver hub
[ 0.461017] usbcore: registered new device driver usb
[ 0.462028] pps_core: LinuxPPS API ver. 1 registered
[ 0.463001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.464006] PTP clock support registered
[ 0.465039] PCI: Using ACPI for IRQ routing
[ 0.466005] PCI: pci_cache_line_size set to 64 bytes
[ 0.467063] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.468002] e820: reserve RAM buffer [mem 0xbff60000-0xbfffffff]
[ 0.469146] NetLabel: Initializing
[ 0.470002] NetLabel: domain hash size = 128
[ 0.471001] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.472020] NetLabel: unlabeled traffic allowed by default
[ 0.473151] Switched to clocksource refined-jiffies
[ 0.489176] pnp: PnP ACPI init
[ 0.490253] pnp 00:00: disabling [mem 0x00000400-0x000004ff] because it overlaps 0000:04:02.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.491006] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:04:02.1 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.492005] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.493004] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.1 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.494004] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:0b:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.495035] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.495999] system 00:00: [io 0x0295-0x0296] has been reserved
[ 0.496999] system 00:00: [io 0x0ca2-0x0ca3] has been reserved
[ 0.497998] system 00:00: [io 0x0ca8-0x0caf] has been reserved
[ 0.498998] system 00:00: [io 0x1000-0x107f] could not be reserved
[ 0.499998] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.500998] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.501998] system 00:00: [io 0xfe00] has been reserved
[ 0.502998] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.503998] system 00:00: [mem 0xfee00000-0xfee0ffff] could not be reserved
[ 0.504997] system 00:00: [mem 0xfec80000-0xfec80fff] could not be reserved
[ 0.505997] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.506997] system 00:00: [mem 0xfe000000-0xfe007fff] has been reserved
[ 0.507997] system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
[ 0.508999] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.510068] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.512243] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.514079] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.515117] pnp: PnP ACPI: found 4 devices
[ 0.522617] Switched to clocksource acpi_pm
[ 0.526401] pci 0000:04:02.0: BAR 6: assigned [mem 0xc8180000-0xc81fffff pref]
[ 0.533812] pci 0000:04:02.1: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref]
[ 0.541214] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.546295] pci 0000:03:00.0: bridge window [io 0x2000-0x2fff]
[ 0.552511] pci 0000:03:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.559416] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.567349] pci 0000:03:00.2: PCI bridge to [bus 05]
[ 0.572440] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.577788] pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
[ 0.584010] pci 0000:02:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.590919] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.598854] pci 0000:06:00.0: BAR 6: assigned [mem 0xc8280000-0xc828ffff pref]
[ 0.606259] pci 0000:06:00.1: BAR 6: assigned [mem 0xc8290000-0xc829ffff pref]
[ 0.613660] pci 0000:02:02.0: PCI bridge to [bus 06]
[ 0.618748] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
[ 0.624963] pci 0000:02:02.0: bridge window [mem 0xc8200000-0xc82fffff]
[ 0.631871] pci 0000:02:02.0: bridge window [mem 0xc0100000-0xc01fffff 64bit pref]
[ 0.639800] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[ 0.645148] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 0.651361] pci 0000:01:00.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.658269] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.666199] pci 0000:01:00.3: PCI bridge to [bus 07]
[ 0.671291] pci 0000:00:02.0: PCI bridge to [bus 01-07]
[ 0.676631] pci 0000:00:02.0: bridge window [io 0x2000-0x3fff]
[ 0.682846] pci 0000:00:02.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.689753] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.697677] pci 0000:00:04.0: PCI bridge to [bus 08]
[ 0.702766] pci 0000:00:06.0: PCI bridge to [bus 09]
[ 0.707853] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 0.712938] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.719153] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.726058] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.733993] pci 0000:0b:01.0: BAR 6: assigned [mem 0xc8320000-0xc833ffff pref]
[ 0.741399] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[ 0.746486] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.752701] pci 0000:00:1e.0: bridge window [mem 0xc8300000-0xc83fffff]
[ 0.759609] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.767541] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.773232] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.779705] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
[ 0.785399] pci_bus 0000:01: resource 1 [mem 0xc8100000-0xc82fffff]
[ 0.791785] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.799186] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
[ 0.804880] pci_bus 0000:02: resource 1 [mem 0xc8100000-0xc82fffff]
[ 0.811269] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.818670] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.824364] pci_bus 0000:03: resource 1 [mem 0xc8100000-0xc81fffff]
[ 0.830750] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.838152] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.843845] pci_bus 0000:04: resource 1 [mem 0xc8100000-0xc81fffff]
[ 0.850234] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.857635] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.863329] pci_bus 0000:06: resource 1 [mem 0xc8200000-0xc82fffff]
[ 0.869716] pci_bus 0000:06: resource 2 [mem 0xc0100000-0xc01fffff 64bit pref]
[ 0.877118] pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff]
[ 0.882811] pci_bus 0000:0a: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.889198] pci_bus 0000:0a: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.896601] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
[ 0.902296] pci_bus 0000:0b: resource 1 [mem 0xc8300000-0xc83fffff]
[ 0.908680] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.916081] pci_bus 0000:0b: resource 4 [io 0x0000-0xffff]
[ 0.921768] pci_bus 0000:0b: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.928287] NET: Registered protocol family 2
[ 0.933054] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.940605] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.947528] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.954232] TCP: reno registered
[ 0.957590] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.963745] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.970393] NET: Registered protocol family 1
[ 0.974992] RPC: Registered named UNIX socket transport module.
[ 0.981035] RPC: Registered udp transport module.
[ 0.985857] RPC: Registered tcp transport module.
[ 0.990679] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.997505] IOAPIC[0]: Set routing entry (2-17 -> 0x41 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 1.006184] IOAPIC[0]: Set routing entry (2-19 -> 0x51 -> IRQ 19 Mode:1 Active:1 Dest:15)
[ 1.014832] IOAPIC[0]: Set routing entry (2-18 -> 0x61 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 1.023482] IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 1.032020] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 1.038328] PCI: CLS mismatch (32 != 64), using 64 bytes
[ 1.043764] pci 0000:03:00.0: rerouting interrupts for [8086:0329]
[ 1.050062] pci 0000:03:00.2: rerouting interrupts for [8086:032a]
[ 1.056371] pci 0000:0b:01.0: Boot video device
[ 1.061112] Unpacking initramfs...
[ 3.624894] Freeing initrd memory: 122808K (ffff880078805000 - ffff88007fff3000)
[ 3.632525] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.639097] software IO TLB [mem 0xbbf60000-0xbff60000] (64MB) mapped at [ffff8800bbf60000-ffff8800bff5ffff]
[ 3.649259] Simple Boot Flag at 0x38 set to 0x1
[ 3.655085] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.661429] Initialise system trusted keyring
[ 3.665928] audit: initializing netlink subsys (disabled)
[ 3.671472] audit: type=2000 audit(1411603999.671:1): initialized
[ 3.678150] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.686786] zpool: loaded
[ 3.689531] zbud: loaded
[ 3.692348] VFS: Disk quotas dquot_6.5.2
[ 3.696444] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.703676] SGI XFS with ACLs, security attributes, no debug enabled
[ 3.710657] 9p: Installing v9fs 9p2000 file system support
[ 3.716306] msgmni has been set to 7896
[ 3.720336] Key type big_key registered
[ 3.724292] SELinux: Registering netfilter hooks
[ 3.730158] NET: Registered protocol family 38
[ 3.734735] Key type asymmetric registered
[ 3.738956] Asymmetric key parser 'x509' registered
[ 3.744011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.751652] io scheduler noop registered
[ 3.755690] io scheduler deadline registered (default)
[ 3.760960] io scheduler cfq registered
[ 3.765265] IOAPIC[0]: Set routing entry (2-16 -> 0x81 -> IRQ 16 Mode:1 Active:1 Dest:15)
[ 3.774121] IOAPIC[0]: Set routing entry (2-17 -> 0x91 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 3.782505] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.788074] IOAPIC[0]: Set routing entry (2-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 3.796511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.802225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.809027] intel_idle: does not run on family 6 model 15
[ 3.814653] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 3.825704] ACPI: Power Button [PWRB]
[ 3.829532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.837107] ACPI: Power Button [PWRF]
[ 3.841340] GHES: HEST is not enabled!
[ 3.845341] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.872235] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.900275] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.908296] hpet_acpi_add: no address or irqs in _CRS
[ 3.913522] Non-volatile memory driver v1.3
[ 3.917840] Linux agpgart interface v0.103
[ 3.922328] rdac: device handler registered
[ 3.926695] hp_sw: device handler registered
[ 3.931088] emc: device handler registered
[ 3.935307] alua: device handler registered
[ 3.939648] libphy: Fixed MDIO Bus: probed
[ 3.943908] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.951079] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.956968] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.962918] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.969076] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.978582] e1000e 0000:06:00.0: irq 25 for MSI/MSI-X
[ 4.041715] e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:30:48:30:70:e0
[ 4.049813] e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.056881] e1000e 0000:06:00.0 eth0: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
[ 4.063808] IOAPIC[0]: Set routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:1 Dest:15)
[ 4.072271] e1000e 0000:06:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.081776] e1000e 0000:06:00.1: irq 26 for MSI/MSI-X
[ 4.148209] e1000e 0000:06:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:30:48:30:70:e1
[ 4.156308] e1000e 0000:06:00.1 eth1: Intel(R) PRO/1000 Network Connection
[ 4.163384] e1000e 0000:06:00.1 eth1: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
[ 4.170230] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k
[ 4.177402] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.183129] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k
[ 4.191053] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[ 4.197025] usbcore: registered new interface driver catc
[ 4.202552] usbcore: registered new interface driver kaweth
[ 4.208249] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 4.215836] usbcore: registered new interface driver pegasus
[ 4.221622] usbcore: registered new interface driver rtl8150
[ 4.227412] usbcore: registered new interface driver asix
[ 4.232939] usbcore: registered new interface driver cdc_ether
[ 4.238900] usbcore: registered new interface driver cdc_eem
[ 4.244688] usbcore: registered new interface driver dm9601
[ 4.250390] usbcore: registered new interface driver smsc75xx
[ 4.256265] usbcore: registered new interface driver smsc95xx
[ 4.262137] usbcore: registered new interface driver gl620a
[ 4.267838] usbcore: registered new interface driver net1080
[ 4.273626] usbcore: registered new interface driver plusb
[ 4.279238] usbcore: registered new interface driver rndis_host
[ 4.285284] usbcore: registered new interface driver cdc_subset
[ 4.291333] usbcore: registered new interface driver zaurus
[ 4.297036] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 4.304628] usbcore: registered new interface driver int51x1
[ 4.310417] usbcore: registered new interface driver ipheth
[ 4.316124] usbcore: registered new interface driver sierra_net
[ 4.322252] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.328915] ehci-pci: EHCI PCI platform driver
[ 4.333672] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.339079] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 4.346674] ehci-pci 0000:00:1d.7: debug port 1
[ 4.355227] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.362150] ehci-pci 0000:00:1d.7: irq 17, io mem 0xc8000000
[ 4.373020] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.378955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.385862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.393263] usb usb1: Product: EHCI Host Controller
[ 4.398262] usb usb1: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 ehci_hcd
[ 4.405429] usb usb1: SerialNumber: 0000:00:1d.7
[ 4.410296] hub 1-0:1.0: USB hub found
[ 4.414176] hub 1-0:1.0: 6 ports detected
[ 4.418469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.424771] ohci-pci: OHCI PCI platform driver
[ 4.429347] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.436019] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.441431] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.449014] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.454024] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
[ 4.459938] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.466843] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.474244] usb usb2: Product: UHCI Host Controller
[ 4.479245] usb usb2: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 uhci_hcd
[ 4.486413] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.491268] hub 2-0:1.0: USB hub found
[ 4.495150] hub 2-0:1.0: 2 ports detected
[ 4.499546] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.504945] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 4.512529] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.517554] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 4.523466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.530371] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.537779] usb usb3: Product: UHCI Host Controller
[ 4.542772] usb usb3: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 uhci_hcd
[ 4.549939] usb usb3: SerialNumber: 0000:00:1d.1
[ 4.554790] hub 3-0:1.0: USB hub found
[ 4.558664] hub 3-0:1.0: 2 ports detected
[ 4.563047] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.568444] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.576030] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.581053] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 4.586964] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.593871] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.601280] usb usb4: Product: UHCI Host Controller
[ 4.606271] usb usb4: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 uhci_hcd
[ 4.613438] usb usb4: SerialNumber: 0000:00:1d.2
[ 4.618310] hub 4-0:1.0: USB hub found
[ 4.622184] hub 4-0:1.0: 2 ports detected
[ 4.626491] usbcore: registered new interface driver usbserial
[ 4.632455] usbcore: registered new interface driver usbserial_generic
[ 4.639110] usbserial: USB Serial support registered for generic
[ 4.645264] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.654470] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.656027] tsc: Refined TSC clocksource calibration: 2666.669 MHz
[ 4.665876] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.671170] mousedev: PS/2 mouse device common for all mice
[ 4.677088] rtc_cmos 00:01: RTC can wake from S4
[ 4.681978] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 4.688212] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 4.695061] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.700775] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
[ 4.708814] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.714955] iTCO_vendor_support: vendor-support=0
[ 4.720224] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.725887] usbcore: registered new interface driver usbhid
[ 4.731582] usbhid: USB HID core driver
[ 4.735575] drop_monitor: Initializing network drop monitor service
[ 4.742041] TCP: cubic registered
[ 4.745480] Initializing XFRM netlink socket
[ 4.750057] NET: Registered protocol family 10
[ 4.754974] NET: Registered protocol family 17
[ 4.759555] 9pnet: Installing 9P2000 support
[ 4.764260]
[ 4.764260] printing PIC contents
[ 4.769234] ... PIC IMR: ffff
[ 4.770228] ... PIC IRR: 0c21
[ 4.775580] ... PIC ISR: 0000
[ 4.778758] ... PIC ELCR: 0e20
[ 4.781933] printing local APIC contents on CPU#0/0:
[ 4.782930] ... APIC ID: 00000000 (0)
[ 4.782930] ... APIC VERSION: 00050014
[ 4.782930] ... APIC TASKPRI: 00000000 (00)
[ 4.782930] ... APIC PROCPRI: 00000000
[ 4.782930] ... APIC LDR: 01000000
[ 4.782930] ... APIC DFR: ffffffff
[ 4.782930] ... APIC SPIV: 000001ff
[ 4.782930] ... APIC ISR field:
[ 4.782930] 0000000000000000000000000000000000000000000000000000000000000000
[ 4.782930] ... APIC TMR field:
[ 4.782930] 0000000000000000000000000000000000020002000200020000000000000000
[ 4.782930] ... APIC IRR field:
[ 4.782930] 0000000000000000000000000000000000000000000000000000000020000000
[ 4.782930] ... APIC ESR: 00000000
[ 4.782930] ... APIC ICR: 000008fd
[ 4.782930] ... APIC ICR2: 08000000
[ 4.782930] ... APIC LVTT: 000000ef
[ 4.782930] ... APIC LVTPC: 00000400
[ 4.782930] ... APIC LVT0: 00010700
[ 4.782930] ... APIC LVT1: 00000400
[ 4.782930] ... APIC LVTERR: 000000fe
[ 4.782930] ... APIC TMICT: 0062472c
[ 4.782930] ... APIC TMCCT: 003a46b8
[ 4.782930] ... APIC TDCR: 00000003
[ 4.782930]
[ 4.889518] number of MP IRQ sources: 15.
[ 4.893649] number of IO-APIC #2 registers: 24.
[ 4.898294] number of IO-APIC #3 registers: 24.
[ 4.902939] testing the IO APIC.......................
[ 4.908195] IO APIC #2......
[ 4.911191] .... register #00: 02000000
[ 4.915142] ....... : physical APIC id: 02
[ 4.919613] ....... : Delivery Type: 0
[ 4.923740] ....... : LTS : 0
[ 4.927867] .... register #01: 00170020
[ 4.931817] ....... : max redirection entries: 17
[ 4.936981] ....... : PRQ implemented: 0
[ 4.941367] ....... : IO APIC version: 20
[ 4.945838] .... IRQ redirection table:
[ 4.949796] 1 0 0 0 0 0 0 00
[ 4.954451] 0 0 0 0 0 1 1 31
[ 4.959102] 0 0 0 0 0 1 1 30
[ 4.963757] 0 0 0 0 0 1 1 33
[ 4.968410] 0 0 0 0 0 1 1 34
[ 4.973063] 0 0 0 0 0 1 1 35
[ 4.977710] 0 0 0 0 0 1 1 36
[ 4.982362] 0 0 0 0 0 1 1 37
[ 4.983020] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 4.993569] 0 0 0 0 0 1 1 38
[ 4.998214] 0 1 0 0 0 1 1 39
[ 5.002864] 0 0 0 0 0 1 1 3A
[ 5.007521] 0 0 0 0 0 1 1 3B
[ 5.012179] 0 0 0 0 0 1 1 3C
[ 5.016831] 0 0 0 0 0 1 1 3D
[ 5.021486] 0 0 0 0 0 1 1 3E
[ 5.026146] 0 0 0 0 0 1 1 3F
[ 5.030794] 1 1 0 1 0 1 1 81
[ 5.035446] 0 1 0 1 0 1 1 91
[ 5.040102] 0 1 0 1 0 1 1 B1
[ 5.044754] 0 1 0 1 0 1 1 D1
[ 5.049399] 1 0 0 0 0 0 0 00
[ 5.054044] 1 0 0 0 0 0 0 00
[ 5.058690] 1 0 0 0 0 0 0 00
[ 5.063336] 1 0 0 0 0 0 0 00
[ 5.067993] IO APIC #3......
[ 5.070995] .... register #00: 03000000
[ 5.074965] ....... : physical APIC id: 03
[ 5.079436] ....... : Delivery Type: 0
[ 5.083560] ....... : LTS : 0
[ 5.087686] .... register #01: 00178020
[ 5.091639] ....... : max redirection entries: 17
[ 5.096803] ....... : PRQ implemented: 1
[ 5.101189] ....... : IO APIC version: 20
[ 5.105662] .... register #02: 03000000
[ 5.109614] ....... : arbitration: 03
[ 5.113737] .... register #03: 00000001
[ 5.117691] ....... : Boot DT : 1
[ 5.121728] .... IRQ redirection table:
[ 5.125685] 1 0 0 0 0 0 0 00
[ 5.130344] 1 0 0 0 0 0 0 00
[ 5.134991] 1 0 0 0 0 0 0 00
[ 5.139637] 1 0 0 0 0 0 0 00
[ 5.144290] 1 0 0 0 0 0 0 00
[ 5.148934] 1 0 0 0 0 0 0 00
[ 5.153581] 1 0 0 0 0 0 0 00
[ 5.158228] 1 0 0 0 0 0 0 00
[ 5.162891] 1 0 0 0 0 0 0 00
[ 5.167545] 1 0 0 0 0 0 0 00
[ 5.172197] 1 0 0 0 0 0 0 00
[ 5.176843] 1 0 0 0 0 0 0 00
[ 5.181495] 1 0 0 0 0 0 0 00
[ 5.186141] 1 0 0 0 0 0 0 00
[ 5.190796] 1 0 0 0 0 0 0 00
[ 5.195451] 1 0 0 0 0 0 0 00
[ 5.200109] 1 0 0 0 0 0 0 00
[ 5.204757] 1 0 0 0 0 0 0 00
[ 5.209404] 1 0 0 0 0 0 0 00
[ 5.214059] 1 0 0 0 0 0 0 00
[ 5.218718] 1 0 0 0 0 0 0 00
[ 5.223366] 1 0 0 0 0 0 0 00
[ 5.224939] usb 2-2: New USB device found, idVendor=0557, idProduct=2220
[ 5.224941] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.224942] usb 2-2: Product: ATEN CS-1758/54
[ 5.224944] usb 2-2: Manufacturer: ATEN
[ 5.250641] 1 0 0 0 0 0 0 00
[ 5.255293] 1 0 0 0 0 0 0 00
[ 5.259949] IRQ to pin mappings:
[ 5.263301] IRQ0 -> 0:2
[ 5.265996] IRQ1 -> 0:1
[ 5.268693] IRQ3 -> 0:3
[ 5.271397] IRQ4 -> 0:4
[ 5.274097] IRQ5 -> 0:5
[ 5.276796] IRQ6 -> 0:6
[ 5.279491] IRQ7 -> 0:7
[ 5.282210] IRQ8 -> 0:8
[ 5.284890] IRQ9 -> 0:9
[ 5.287584] IRQ10 -> 0:10
[ 5.290447] IRQ11 -> 0:11
[ 5.293313] IRQ12 -> 0:12
[ 5.296180] IRQ13 -> 0:13
[ 5.299040] IRQ14 -> 0:14
[ 5.301904] IRQ15 -> 0:15
[ 5.304771] IRQ16 -> 0:16
[ 5.307630] IRQ17
[ 5.309378] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:0557:2220.0001/input/input5
[ 5.309489] hid-generic 0003:0557:2220.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.0-2/input0
[ 5.333470] -> 0:17
[ 5.336064] IRQ18 -> 0:18
[ 5.338927] IRQ19 -> 0:19
[ 5.341796] .................................... done.
[ 5.347217] Loading compiled-in X.509 certificates
[ 5.353229] Loaded X.509 cert 'Magrathea: Glacier signing key: 147c3461adf97819cd11ff63674270cbc5962740'
[ 5.362931] registered taskstats version 1
[ 5.363295] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:0557:2220.0002/input/input6
[ 5.363378] hid-generic 0003:0557:2220.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.0-2/input1
[ 5.393109] Key type trusted registered
[ 5.398660] Key type encrypted registered
[ 5.404405] ima: No TPM chip found, activating TPM-bypass!
[ 5.410055] evm: HMAC attrs: 0x1
[ 5.413893] rtc_cmos 00:01: setting system clock to 2014-09-25 00:13:24 UTC (1411604004)
[ 5.447469] ------------[ cut here ]------------
[ 5.452212] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 5.462479] Modules linked in:
[ 5.465712] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.473467] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.480202] 0000000000000009 ffff880139ab7c00 ffffffff8185b75a 0000000000000000
[ 5.488043] ffff880139ab7c38 ffffffff8107056d 0000000000000001 ffff88007f8ec000
[ 5.495879] ffff88013974e098 ffff88013974e000 ffff88007f8ecdb8 ffff880139ab7c48
[ 5.503722] Call Trace:
[ 5.506293] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.511552] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.517675] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 5.523631] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 5.529932] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 5.535368] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.540712] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.546754] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.552534] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.558314] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.564529] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.569876] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.576091] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 5.581871] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 5.587826] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 5.593436] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 5.599735] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.605079] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 5.610341] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 5.615861] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.621207] ---[ end trace 3e09fff841f00690 ]---
[ 5.625958] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X
[ 5.631145] e1000e 0000:06:00.0: irq 28 for MSI/MSI-X
[ 5.636319] ------------[ cut here ]------------
[ 5.641057] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 5.650197] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:02.0/0000:06:00.0/msi_irqs'
[ 5.662464] Modules linked in:
[ 5.665695] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.674576] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.681311] 0000000000000009 ffff880139ab7ad8 ffffffff8185b75a ffff880139ab7b20
[ 5.689154] ffff880139ab7b10 ffffffff8107056d ffff880139757000 ffffffff81b63eab
[ 5.697019] ffff880139735780 ffff88013975ae00 ffff88013974e000 ffff880139ab7b70
[ 5.704869] Call Trace:
[ 5.707434] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.712693] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.718822] [<ffffffff810705dc>] warn_slowpath_fmt+0x4c/0x50
[ 5.726258] [<ffffffff812530a8>] ? kernfs_path+0x48/0x60
[ 5.731778] [<ffffffff81256a64>] sysfs_warn_dup+0x64/0x80
[ 5.737385] [<ffffffff812574d7>] internal_create_group+0x277/0x280
[ 5.743773] [<ffffffff81257609>] sysfs_create_groups+0x49/0xa0
[ 5.749813] [<ffffffff814492ad>] populate_msi_sysfs+0x1bd/0x200
[ 5.755939] [<ffffffff8144985f>] pci_enable_msi_range+0x1bf/0x2f0
[ 5.762250] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 5.767685] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.773030] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.779072] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.784853] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.790632] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.796846] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.802186] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.808401] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 5.814181] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 5.820135] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 5.825742] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 5.832042] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.837391] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 5.842649] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 5.848170] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.853509] ---[ end trace 3e09fff841f00691 ]---
[ 5.858259] ------------[ cut here ]------------
[ 5.858262] Switched to clocksource tsc
[ 5.866941] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 5.877208] Modules linked in:
[ 5.880438] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.889317] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.896040] 0000000000000009 ffff880139ab7be8 ffffffff8185b75a 0000000000000000
[ 5.903871] ffff880139ab7c20 ffffffff8107056d 0000000000000001 ffff88007f8ec000
[ 5.911707] ffff88013974e098 ffff88013974e000 ffff88007f8ecdb8 ffff880139ab7c30
[ 5.919540] Call Trace:
[ 5.922103] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.927355] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.933473] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 5.939417] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 5.945709] [<ffffffff814498c7>] ? pci_enable_msi_range+0x227/0x2f0
[ 5.952177] [<ffffffff815afa56>] e1000e_set_interrupt_capability+0x46/0x130
[ 5.959343] [<ffffffff815b49d1>] e1000_open+0x2f1/0x4b0
[ 5.964770] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.970108] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.976140] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.981910] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.987683] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.993887] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.999227] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.005431] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.011203] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.017148] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.022749] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.029039] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.034380] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.039631] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.045143] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.050480] ---[ end trace 3e09fff841f00692 ]---
[ 6.055229] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X
[ 6.060517] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.091833] ------------[ cut here ]------------
[ 6.096564] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 6.106829] Modules linked in:
[ 6.110063] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 6.118939] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 6.125663] 0000000000000009 ffff880139ab7c00 ffffffff8185b75a 0000000000000000
[ 6.133495] ffff880139ab7c38 ffffffff8107056d 0000000000000001 ffff88007f8f8000
[ 6.141329] ffff88013974f098 ffff88013974f000 ffff88007f8f8db8 ffff880139ab7c48
[ 6.149165] Call Trace:
[ 6.151726] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 6.156978] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 6.163095] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 6.169039] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 6.175333] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 6.180758] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 6.186097] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 6.192127] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 6.197900] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 6.203672] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.209880] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 6.215217] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.221422] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.227194] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.233140] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.238737] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.245029] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.250369] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.255620] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.261132] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.266471] ---[ end trace 3e09fff841f00693 ]---
[ 6.271218] e1000e 0000:06:00.1: irq 28 for MSI/MSI-X
[ 6.276397] e1000e 0000:06:00.1: irq 29 for MSI/MSI-X
[ 6.281563] ------------[ cut here ]------------
[ 6.286292] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 6.295425] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:02.0/0000:06:00.1/msi_irqs'
[ 6.307687] Modules linked in:
[ 6.310920] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 6.319794] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 6.326520] 0000000000000009 ffff880139ab7ad8 ffffffff8185b75a ffff880139ab7b20
[ 6.334354] ffff880139ab7b10 ffffffff8107056d ffff880139757000 ffffffff81b63eab
[ 6.342188] ffff8801397369d8 ffff88013975aea0 ffff88013974f000 ffff880139ab7b70
[ 6.350023] Call Trace:
[ 6.352582] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 6.357836] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 6.363955] [<ffffffff810705dc>] warn_slowpath_fmt+0x4c/0x50
[ 6.369813] [<ffffffff812530a8>] ? kernfs_path+0x48/0x60
[ 6.375323] [<ffffffff81256a64>] sysfs_warn_dup+0x64/0x80
[ 6.380924] [<ffffffff812574d7>] internal_create_group+0x277/0x280
[ 6.387302] [<ffffffff81257609>] sysfs_create_groups+0x49/0xa0
[ 6.393334] [<ffffffff814492ad>] populate_msi_sysfs+0x1bd/0x200
[ 6.399452] [<ffffffff8144985f>] pci_enable_msi_range+0x1bf/0x2f0
[ 6.405743] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 6.411169] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 6.416508] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 6.422540] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 6.428313] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 6.434084] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.440290] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 6.445628] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.451832] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.457607] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.463552] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.469149] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.475440] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.480779] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.486031] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.491544] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.496882] ---[ end trace 3e09fff841f00694 ]---
[ 6.501618] ------------[ cut here ]------------
[ 6.506347] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 6.516615] Modules linked in:
[ 6.519846] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 6.528723] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 6.535448] 0000000000000009 ffff880139ab7be8 ffffffff8185b75a 0000000000000000
[ 6.543273] ffff880139ab7c20 ffffffff8107056d 0000000000000001 ffff88007f8f8000
[ 6.551108] ffff88013974f098 ffff88013974f000 ffff88007f8f8db8 ffff880139ab7c30
[ 6.558942] Call Trace:
[ 6.561501] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 6.566753] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 6.572870] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 6.578817] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 6.585109] [<ffffffff814498c7>] ? pci_enable_msi_range+0x227/0x2f0
[ 6.591575] [<ffffffff815afa56>] e1000e_set_interrupt_capability+0x46/0x130
[ 6.598741] [<ffffffff815b49d1>] e1000_open+0x2f1/0x4b0
[ 6.604166] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 6.609505] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 6.615538] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 6.621309] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 6.627082] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.633288] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 6.638625] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.644832] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.650602] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.656549] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.662150] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.668447] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.673786] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.679040] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.684550] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.689889] ---[ end trace 3e09fff841f00695 ]---
[ 6.694635] e1000e 0000:06:00.1: irq 28 for MSI/MSI-X
[ 6.701485] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 8.195378] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.209012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.220006] Sending DHCP requests .., OK
[ 11.553017] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.134
[ 11.618083] e1000e: eth1 NIC Link is Down
[ 11.622301] IP-Config: Complete:
[ 11.625648] device=eth0, hwaddr=00:30:48:30:70:e0, ipaddr=192.168.1.134, mask=255.255.255.0, gw=192.168.1.1
[ 11.636005] host=bens, domain=lkp.intel.com, nis-domain=(none)
[ 11.642384] bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
[ 11.649132] nameserver0=192.168.1.1
[ 11.653548] PM: Hibernation image not present or could not be loaded.
[ 11.661752] Freeing unused kernel memory: 1804K (ffffffff81dde000 - ffffffff81fa1000)
[ 11.847955] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.876783] i5k_amb: probe of i5k_amb.0 failed with error -16
[ 11.887143] EDAC MC: Ver: 3.0.0
[ 11.890564] aic79xx 0000:04:02.0: enabling device (0152 -> 0153)
[ 11.896805] aic79xx 0000:04:02.0: PCI IRQ 16 -> rerouted to legacy IRQ 16
[ 11.906404] EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
[ 11.916285] EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
[ 12.089956] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.101511] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 12.107965] libata version 3.00 loaded.
[ 12.113737] ata_piix 0000:00:1f.2: version 2.13
[ 12.118577] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 12.124448] scsi host1: ata_piix
[ 12.127992] scsi host2: ata_piix
[ 12.131441] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1870 irq 14
[ 12.131460] Error: Driver 'pcspkr' is already registered, aborting...
[ 12.145085] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1878 irq 15
[ 12.306291] ata1.00: ATA-6: ST3120026AS, 3.00, max UDMA/133
[ 12.311991] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 12.324264] ata1.00: configured for UDMA/133
[ 12.328800] scsi 1:0:0:0: Direct-Access ATA ST3120026AS 3.00 PQ: 0 ANSI: 5
[ 12.475293] ata2.01: ATAPI: LITE-ON COMBO SOHC-5236V, R$0C, max UDMA/44
[ 12.482043] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 12.509174] ata2.01: configured for UDMA/33
[ 12.515364] scsi 2:0:1:0: CD-ROM LITE-ON COMBO SOHC-5236V R$0C PQ: 0 ANSI: 5
[ 12.559324] sr 2:0:1:0: [sr0] scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 12.567348] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.573046] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 12.575070] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 12.575137] sd 1:0:0:0: [sda] Write Protect is off
[ 12.575139] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.575167] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.608401] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 12.613881] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 12.648736] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 12.654820] sd 1:0:0:0: [sda] Attached SCSI disk
[ 12.966888] random: nonblocking pool is initialized
[ 15.120033] floppy0: no floppy controllers found
[ 27.020029] scsi host0: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 27.020029] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 27.020029] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs
[ 27.040829] aic79xx 0000:04:02.1: enabling device (0152 -> 0153)
[ 27.047034] aic79xx 0000:04:02.1: PCI IRQ 17 -> rerouted to legacy IRQ 17
[ 28.846321] scsi 0:0:8:0: Processor SUPER GEM359 REV001 1.09 PQ: 0 ANSI: 2
[ 28.854622] scsi target0:0:8: asynchronous
[ 28.858844] scsi target0:0:8: Beginning Domain Validation
[ 28.876294] scsi target0:0:8: Ending Domain Validation
[ 30.687208] scsi 0:0:8:0: Attached scsi generic sg2 type 3
[ 42.170020] scsi host3: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 42.170020] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 42.170020] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs
[ 46.081511] fuse init (API version 7.23)
[ 46.190555] device-mapper: uevent: version 1.0.3
[ 46.195482] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 47.125508] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
==> /lkp/lkp/src/tmp/run_log <==
==> /lkp/lkp/src/tmp/err_log <==
==> /lkp/lkp/src/tmp/run_log <==
25 Sep 00:14:13 ntpdate[1648]: step time server 192.168.1.1 offset 0.247349 sec
Kernel tests: Boot OK!
LKP: HOSTNAME bens, MAC 00:30:48:30:70:e0, kernel 3.17.0-rc2-00011-g4ab2ee7 1, serial console /dev/ttyS0
/lkp/lkp/src/bin/run-lkp
[ 53.967340] ipmi message handler version 39.2
[ 53.973425] IPMI Watchdog: driver initialized
Stopping watchdog keepalive daemon....
Starting watchdog daemon...RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230
[ 54.001783] bmc-watchdog:1700 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back
a797a3ed2228990f82545/0
job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml
WARNING: multiple messages have this Message-ID (diff)
From: Fengguang Wu <fengguang.wu@intel.com>
To: Alexander Gordeev <agordeev@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
LKML <linux-kernel@vger.kernel.org>,
lkp@01.org
Subject: [PCI/MSI] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
Date: Thu, 25 Sep 2014 11:04:59 +0800 [thread overview]
Message-ID: <20140925030459.GB13564@localhost> (raw)
[-- Attachment #1: Type: text/plain, Size: 3378 bytes --]
Hi Alexander,
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
commit 4ab2ee7c77875669230a797a3ed2228990f82545 ("PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()")
+-----------------------------------------------------+------------+------------+
| | 888215f389 | 4ab2ee7c77 |
+-----------------------------------------------------+------------+------------+
| boot_successes | 15 | 2 |
| early-boot-hang | 1 | |
| boot_failures | 0 | 13 |
| WARNING:at_drivers/pci/msi.c:pci_enable_msi_range() | 0 | 5 |
| WARNING:at_fs/sysfs/dir.c:sysfs_warn_dup() | 0 | 5 |
| backtrace:ip_auto_config | 0 | 5 |
| backtrace:kernel_init_freeable | 0 | 5 |
| BUG:kernel_test_crashed | 0 | 8 |
+-----------------------------------------------------+------------+------------+
[ 5.410055] evm: HMAC attrs: 0x1
[ 5.413893] rtc_cmos 00:01: setting system clock to 2014-09-25 00:13:24 UTC (1411604004)
[ 5.447469] ------------[ cut here ]------------
[ 5.452212] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 5.462479] Modules linked in:
[ 5.465712] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.473467] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.480202] 0000000000000009 ffff880139ab7c00 ffffffff8185b75a 0000000000000000
[ 5.488043] ffff880139ab7c38 ffffffff8107056d 0000000000000001 ffff88007f8ec000
[ 5.495879] ffff88013974e098 ffff88013974e000 ffff88007f8ecdb8 ffff880139ab7c48
[ 5.503722] Call Trace:
[ 5.506293] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.511552] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.517675] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 5.523631] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 5.529932] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 5.535368] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.540712] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.546754] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.552534] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.558314] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.564529] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.569876] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.576091] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 5.581871] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 5.587826] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 5.593436] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 5.599735] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.605079] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 5.610341] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 5.615861] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.621207] ---[ end trace 3e09fff841f00690 ]---
[ 5.625958] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X
Thanks,
Fengguang
[-- Attachment #2: .dmesg --]
[-- Type: text/plain, Size: 92195 bytes --]
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.17.0-rc2-00011-g4ab2ee7 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP Thu Sep 25 00:06:22 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff60000-0x00000000bff68fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff69000-0x00000000bff7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF80000 mask FFFF80000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbff80000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbff60 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f58f0-0x000f58ff] mapped at [ffff8800000f58f0]
[ 0.000000] mpc: 9e171-9e33d
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02184000, 0x02184fff] PGTABLE
[ 0.000000] BRK [0x02185000, 0x02185fff] PGTABLE
[ 0.000000] BRK [0x02186000, 0x02186fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x02187000, 0x02187fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff5ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff5ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x78805000-0x7fff2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F58C0 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x00000000BFF64382 00003C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF68E48 000074 (v01 INTEL TUMWATER 06040000 PTL 00000003)
[ 0.000000] ACPI: DSDT 0x00000000BFF64A6A 0043DE (v01 Intel BLAKFORD 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BFF69FC0 000040
[ 0.000000] ACPI: APIC 0x00000000BFF68EBC 000090 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x00000000BFF68F4C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFF68F88 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 0x00000000BFF68FB0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFF643BE 0006AC (v01 DpgPmm CpuPm 00000012 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13ffd7000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbff5ffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12222 pages used for memmap
[ 0.000000] DMA32 zone: 782176 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec80000)
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff60000-0xbff68fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff69000-0xbff7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff80000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s88960 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s88960 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031913
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3919940K/4193264K available (8613K kernel code, 1703K rwdata, 3868K rodata, 1804K init, 1888K bss, 273324K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:864 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.17.0-rc2-00011-g4ab2ee7 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP Thu Sep 25 00:06:22 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff60000-0x00000000bff68fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff69000-0x00000000bff7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF80000 mask FFFF80000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbff80000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbff60 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f58f0-0x000f58ff] mapped at [ffff8800000f58f0]
[ 0.000000] mpc: 9e171-9e33d
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02184000, 0x02184fff] PGTABLE
[ 0.000000] BRK [0x02185000, 0x02185fff] PGTABLE
[ 0.000000] BRK [0x02186000, 0x02186fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x02187000, 0x02187fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff5ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff5ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x78805000-0x7fff2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F58C0 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x00000000BFF64382 00003C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF68E48 000074 (v01 INTEL TUMWATER 06040000 PTL 00000003)
[ 0.000000] ACPI: DSDT 0x00000000BFF64A6A 0043DE (v01 Intel BLAKFORD 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BFF69FC0 000040
[ 0.000000] ACPI: APIC 0x00000000BFF68EBC 000090 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x00000000BFF68F4C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFF68F88 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 0x00000000BFF68FB0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFF643BE 0006AC (v01 DpgPmm CpuPm 00000012 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13ffd7000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbff5ffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048316
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12222 pages used for memmap
[ 0.000000] DMA32 zone: 782176 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec80000)
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff60000-0xbff68fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff69000-0xbff7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff80000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s88960 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s88960 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031913
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/vmlinuz-3.17.0-rc2-00011-g4ab2ee7 kconfig=x86_64-rhel commit=4ab2ee7c77875669230a797a3ed2228990f82545 branch=linux-devel/devel-hourly-2014092408 root=/dev/ram0 max_uptime=18000 RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230a797a3ed2228990f82545/0 ip=::::bens::dhcp hpet=disable pci=nomsi earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3919940K/4193264K available (8613K kernel code, 1703K rwdata, 3868K rodata, 1804K init, 1888K bss, 273324K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:864 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.409 MHz processor
[ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.81 BogoMIPS (lpj=2666409)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] ACPI: Core revision 20140724
[ 0.001000] ACPI: All ACPI Tables successfully acquired
[ 0.001000] Security Framework initialized
[ 0.001000] SELinux: Initializing.
[ 0.001000] SELinux: Starting in permissive mode
[ 0.001000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001000] Initializing cgroup subsys memory
[ 0.001000] Initializing cgroup subsys devices
[ 0.001000] Initializing cgroup subsys freezer
[ 0.001000] Initializing cgroup subsys net_cls
[ 0.001000] Initializing cgroup subsys blkio
[ 0.001000] Initializing cgroup subsys perf_event
[ 0.001000] Initializing cgroup subsys hugetlb
[ 0.001000] CPU: Physical Processor ID: 0
[ 0.001000] CPU: Processor Core ID: 0
[ 0.001000] mce: CPU supports 6 MCE banks
[ 0.001000] CPU0: Thermal monitoring handled by SMI
[ 0.001000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.001000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.001000] Freeing SMP alternatives memory: 36K (ffffffff81fa1000 - ffffffff81faa000)
[ 0.001000] ftrace: allocating 31169 entries in 122 pages
[ 0.001000] Getting VERSION: 50014
[ 0.001000] Getting VERSION: 50014
[ 0.001000] Getting ID: 0
[ 0.001000] Getting ID: 0
[ 0.001000] masked ExtINT on CPU#0
[ 0.001000] ENABLING IO-APIC IRQs
[ 0.001000] init IO_APIC IRQs
[ 0.001000] apic 2 pin 0 not connected
[ 0.001000] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.001000] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.001000] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.001013] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.002005] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
[ 0.003005] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.004004] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.005004] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.006005] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.007005] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
[ 0.008005] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
[ 0.009005] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.010005] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.011005] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.012005] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.013003] apic 2 pin 16 not connected
[ 0.014001] apic 2 pin 17 not connected
[ 0.015001] apic 2 pin 18 not connected
[ 0.016001] apic 2 pin 19 not connected
[ 0.017001] apic 2 pin 20 not connected
[ 0.018001] apic 2 pin 21 not connected
[ 0.019001] apic 2 pin 22 not connected
[ 0.020001] apic 2 pin 23 not connected
[ 0.021001] apic 3 pin 0 not connected
[ 0.022001] apic 3 pin 1 not connected
[ 0.023001] apic 3 pin 2 not connected
[ 0.024001] apic 3 pin 3 not connected
[ 0.025001] apic 3 pin 4 not connected
[ 0.026001] apic 3 pin 5 not connected
[ 0.027001] apic 3 pin 6 not connected
[ 0.028001] apic 3 pin 7 not connected
[ 0.029001] apic 3 pin 8 not connected
[ 0.030001] apic 3 pin 9 not connected
[ 0.031001] apic 3 pin 10 not connected
[ 0.032001] apic 3 pin 11 not connected
[ 0.033001] apic 3 pin 12 not connected
[ 0.034001] apic 3 pin 13 not connected
[ 0.035001] apic 3 pin 14 not connected
[ 0.036001] apic 3 pin 15 not connected
[ 0.037001] apic 3 pin 16 not connected
[ 0.038001] apic 3 pin 17 not connected
[ 0.039001] apic 3 pin 18 not connected
[ 0.040001] apic 3 pin 19 not connected
[ 0.041001] apic 3 pin 20 not connected
[ 0.042001] apic 3 pin 21 not connected
[ 0.043001] apic 3 pin 22 not connected
[ 0.044001] apic 3 pin 23 not connected
[ 0.045134] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056782] smpboot: CPU0: Genuine Intel(R) CPU @ 2.66GHz (fam: 06, model: 0f, stepping: 04)
[ 0.060002] Using local APIC timer interrupts.
[ 0.060002] calibrating APIC timer ...
[ 0.062000] ... lapic delta = 2083020
[ 0.062000] ... PM-Timer delta = 357900
[ 0.062000] ... PM-Timer result ok
[ 0.062000] ..... delta 2083020
[ 0.062000] ..... mult: 89465027
[ 0.062000] ..... calibration result: 333283
[ 0.062000] ..... CPU clock speed is 2666.0264 MHz.
[ 0.062000] ..... host bus clock speed is 333.0283 MHz.
[ 0.062041] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.067001] perf_event_intel: PEBS disabled due to CPU errata
[ 0.068003] ... version: 2
[ 0.069001] ... bit width: 40
[ 0.070001] ... generic registers: 2
[ 0.071001] ... value mask: 000000ffffffffff
[ 0.072001] ... max period: 000000007fffffff
[ 0.073001] ... fixed-purpose events: 3
[ 0.074001] ... event mask: 0000000700000003
[ 0.077867] x86: Booting SMP configuration:
[ 0.078003] .... node #0, CPUs: #1
[ 0.077746] masked ExtINT on CPU#1
[ 0.077746] CPU1: Thermal monitoring handled by SMI
[ 0.160140] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.161134] #2
[ 0.161020] masked ExtINT on CPU#2
[ 0.161020] CPU2: Thermal monitoring handled by SMI
[ 0.183204] #3
[ 0.183042] masked ExtINT on CPU#3
[ 0.183042] CPU3: Thermal monitoring handled by SMI
[ 0.205013] x86: Booted up 1 node, 4 CPUs
[ 0.206003] smpboot: Total of 4 processors activated (21330.84 BogoMIPS)
[ 0.209139] devtmpfs: initialized
[ 0.214253] evm: security.selinux
[ 0.215001] evm: security.ima
[ 0.216001] evm: security.capability
[ 0.217116] PM: Registering ACPI NVS region [mem 0xbff69000-0xbff7ffff] (94208 bytes)
[ 0.220109] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.221130] NET: Registered protocol family 16
[ 0.223151] cpuidle: using governor menu
[ 0.224139] ACPI: bus type PCI registered
[ 0.225002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.226077] PCI: MMCONFIG for domain 0000 [bus 00-0a] at [mem 0xe0000000-0xe0afffff] (base 0xe0000000)
[ 0.227003] PCI: MMCONFIG at [mem 0xe0000000-0xe0afffff] reserved in E820
[ 0.228032] PCI: Using configuration type 1 for base access
[ 0.232085] ACPI: Added _OSI(Module Device)
[ 0.233003] ACPI: Added _OSI(Processor Device)
[ 0.234001] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.235002] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237987] ACPI: Interpreter enabled
[ 0.238011] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.241002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140724/hwxface-580)
[ 0.244008] ACPI: (supports S0 S1 S4 S5)
[ 0.245001] ACPI: Using IOAPIC for interrupt routing
[ 0.246022] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.251175] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.252006] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
[ 0.253005] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.254708] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.255003] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.256002] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.257002] acpi PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.258002] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.259002] acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.260002] acpi PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.261002] acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xfdffffff] (ignored)
[ 0.262002] PCI: root bus 00: using default resources
[ 0.263003] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0a] only partially covers this bridge
[ 0.264103] PCI host bridge to bus 0000:00
[ 0.265003] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.266002] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.267002] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.268013] pci 0000:00:00.0: [8086:25d8] type 00 class 0x060000
[ 0.269048] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.270073] pci 0000:00:02.0: [8086:25f7] type 01 class 0x060400
[ 0.271042] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.272074] pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
[ 0.273042] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.274030] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.275050] pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
[ 0.276042] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.277028] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.278046] pci 0000:00:08.0: [8086:1a38] type 00 class 0x088000
[ 0.279011] pci 0000:00:08.0: reg 0x10: [mem 0xfe700000-0xfe7003ff 64bit]
[ 0.280038] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.281068] pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
[ 0.283065] pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
[ 0.284331] pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
[ 0.285075] pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
[ 0.286068] pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
[ 0.287071] pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
[ 0.288073] pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
[ 0.289080] pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
[ 0.290072] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.291033] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.292051] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
[ 0.293038] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
[ 0.294057] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.295046] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
[ 0.296038] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
[ 0.297059] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.298046] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
[ 0.299037] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
[ 0.300058] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.301054] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
[ 0.302019] pci 0000:00:1d.7: reg 0x10: [mem 0xc8000000-0xc80003ff]
[ 0.303077] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.304031] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.305046] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.306069] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.307046] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
[ 0.308071] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.309072] pci 0000:00:1f.2: [8086:2680] type 00 class 0x010180
[ 0.310014] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.311008] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.312007] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.313008] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.314008] pci 0000:00:1f.2: reg 0x20: [io 0x1870-0x187f]
[ 0.315015] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.316002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.317002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.318002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.319019] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.320064] pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
[ 0.321048] pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
[ 0.322140] pci 0000:01:00.0: [8086:3500] type 01 class 0x060400
[ 0.323061] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.325012] pci 0000:01:00.3: [8086:350c] type 01 class 0x060400
[ 0.326056] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
[ 0.327021] pci 0000:01:00.3: System wakeup disabled by ACPI
[ 0.328044] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.329009] pci 0000:00:02.0: PCI bridge to [bus 01-07]
[ 0.330003] pci 0000:00:02.0: bridge window [io 0x2000-0x3fff]
[ 0.331003] pci 0000:00:02.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.332004] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.333069] pci 0000:02:00.0: [8086:3510] type 01 class 0x060400
[ 0.335034] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.336057] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.337011] pci 0000:02:02.0: [8086:3518] type 01 class 0x060400
[ 0.338063] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.339022] pci 0000:02:02.0: System wakeup disabled by ACPI
[ 0.340039] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.341024] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[ 0.342004] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 0.343003] pci 0000:01:00.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.344005] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.345068] pci 0000:03:00.0: [8086:0329] type 01 class 0x060400
[ 0.346020] pci 0000:03:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.347069] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.348027] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.349049] pci 0000:03:00.2: [8086:032a] type 01 class 0x060400
[ 0.350020] pci 0000:03:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.351069] pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
[ 0.352024] pci 0000:03:00.2: System wakeup disabled by ACPI
[ 0.353044] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.354009] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.355003] pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
[ 0.356003] pci 0000:02:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.357005] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.358066] pci 0000:04:02.0: [9005:801d] type 00 class 0x010000
[ 0.359024] pci 0000:04:02.0: reg 0x10: [io 0x2400-0x24ff]
[ 0.360014] pci 0000:04:02.0: reg 0x14: [mem 0xc8100000-0xc8101fff 64bit]
[ 0.361010] pci 0000:04:02.0: reg 0x1c: [io 0x2000-0x20ff]
[ 0.362025] pci 0000:04:02.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.363097] pci 0000:04:02.1: [9005:801d] type 00 class 0x010000
[ 0.364021] pci 0000:04:02.1: reg 0x10: [io 0x2c00-0x2cff]
[ 0.365014] pci 0000:04:02.1: reg 0x14: [mem 0xc8102000-0xc8103fff 64bit]
[ 0.366010] pci 0000:04:02.1: reg 0x1c: [io 0x2800-0x28ff]
[ 0.367025] pci 0000:04:02.1: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.368123] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.369004] pci 0000:03:00.0: bridge window [io 0x2000-0x2fff]
[ 0.370004] pci 0000:03:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.371005] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.372089] pci 0000:03:00.2: PCI bridge to [bus 05]
[ 0.373079] pci 0000:06:00.0: [8086:1096] type 00 class 0x020000
[ 0.374016] pci 0000:06:00.0: reg 0x10: [mem 0xc8220000-0xc823ffff]
[ 0.375010] pci 0000:06:00.0: reg 0x14: [mem 0xc8200000-0xc821ffff]
[ 0.376010] pci 0000:06:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.377033] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.378048] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.379068] pci 0000:06:00.1: [8086:1096] type 00 class 0x020000
[ 0.380016] pci 0000:06:00.1: reg 0x10: [mem 0xc8260000-0xc827ffff]
[ 0.381010] pci 0000:06:00.1: reg 0x14: [mem 0xc8240000-0xc825ffff]
[ 0.382010] pci 0000:06:00.1: reg 0x18: [io 0x3020-0x303f]
[ 0.384008] pci 0000:06:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.385048] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 0.386063] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.387012] pci 0000:02:02.0: PCI bridge to [bus 06]
[ 0.388004] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
[ 0.389003] pci 0000:02:02.0: bridge window [mem 0xc8200000-0xc82fffff]
[ 0.390005] pci 0000:02:02.0: bridge window [mem 0xc0100000-0xc01fffff 64bit pref]
[ 0.391089] pci 0000:01:00.3: PCI bridge to [bus 07]
[ 0.392050] pci 0000:00:04.0: PCI bridge to [bus 08]
[ 0.393044] pci 0000:00:06.0: PCI bridge to [bus 09]
[ 0.394055] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 0.395004] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.396004] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.397005] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.398044] pci 0000:0b:01.0: [1002:515e] type 00 class 0x030000
[ 0.399017] pci 0000:0b:01.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.400010] pci 0000:0b:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.401010] pci 0000:0b:01.0: reg 0x18: [mem 0xc8300000-0xc830ffff]
[ 0.402033] pci 0000:0b:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.403028] pci 0000:0b:01.0: supports D1 D2
[ 0.404075] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
[ 0.405004] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.406004] pci 0000:00:1e.0: bridge window [mem 0xc8300000-0xc83fffff]
[ 0.407005] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.408002] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.409002] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.410019] pci 0000:01:00.0: Max Payload Size 128, but upstream 0000:00:02.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.411004] pci 0000:02:00.0: Max Payload Size 256, but upstream 0000:01:00.0 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.412267] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15), disabled.
[ 0.417345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15), disabled.
[ 0.422048] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15), disabled.
[ 0.427346] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15), disabled.
[ 0.432346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.437346] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.441344] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.447043] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.453338] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.454002] vgaarb: loaded
[ 0.455001] vgaarb: bridge control possible 0000:0b:01.0
[ 0.457008] SCSI subsystem initialized
[ 0.458041] ACPI: bus type USB registered
[ 0.459031] usbcore: registered new interface driver usbfs
[ 0.460013] usbcore: registered new interface driver hub
[ 0.461017] usbcore: registered new device driver usb
[ 0.462028] pps_core: LinuxPPS API ver. 1 registered
[ 0.463001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.464006] PTP clock support registered
[ 0.465039] PCI: Using ACPI for IRQ routing
[ 0.466005] PCI: pci_cache_line_size set to 64 bytes
[ 0.467063] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.468002] e820: reserve RAM buffer [mem 0xbff60000-0xbfffffff]
[ 0.469146] NetLabel: Initializing
[ 0.470002] NetLabel: domain hash size = 128
[ 0.471001] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.472020] NetLabel: unlabeled traffic allowed by default
[ 0.473151] Switched to clocksource refined-jiffies
[ 0.489176] pnp: PnP ACPI init
[ 0.490253] pnp 00:00: disabling [mem 0x00000400-0x000004ff] because it overlaps 0000:04:02.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.491006] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:04:02.1 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.492005] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.493004] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:00.1 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.494004] pnp 00:00: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:0b:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.495035] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.495999] system 00:00: [io 0x0295-0x0296] has been reserved
[ 0.496999] system 00:00: [io 0x0ca2-0x0ca3] has been reserved
[ 0.497998] system 00:00: [io 0x0ca8-0x0caf] has been reserved
[ 0.498998] system 00:00: [io 0x1000-0x107f] could not be reserved
[ 0.499998] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.500998] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.501998] system 00:00: [io 0xfe00] has been reserved
[ 0.502998] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.503998] system 00:00: [mem 0xfee00000-0xfee0ffff] could not be reserved
[ 0.504997] system 00:00: [mem 0xfec80000-0xfec80fff] could not be reserved
[ 0.505997] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.506997] system 00:00: [mem 0xfe000000-0xfe007fff] has been reserved
[ 0.507997] system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
[ 0.508999] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.510068] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.512243] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.514079] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.515117] pnp: PnP ACPI: found 4 devices
[ 0.522617] Switched to clocksource acpi_pm
[ 0.526401] pci 0000:04:02.0: BAR 6: assigned [mem 0xc8180000-0xc81fffff pref]
[ 0.533812] pci 0000:04:02.1: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref]
[ 0.541214] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.546295] pci 0000:03:00.0: bridge window [io 0x2000-0x2fff]
[ 0.552511] pci 0000:03:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.559416] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.567349] pci 0000:03:00.2: PCI bridge to [bus 05]
[ 0.572440] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.577788] pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
[ 0.584010] pci 0000:02:00.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.590919] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.598854] pci 0000:06:00.0: BAR 6: assigned [mem 0xc8280000-0xc828ffff pref]
[ 0.606259] pci 0000:06:00.1: BAR 6: assigned [mem 0xc8290000-0xc829ffff pref]
[ 0.613660] pci 0000:02:02.0: PCI bridge to [bus 06]
[ 0.618748] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
[ 0.624963] pci 0000:02:02.0: bridge window [mem 0xc8200000-0xc82fffff]
[ 0.631871] pci 0000:02:02.0: bridge window [mem 0xc0100000-0xc01fffff 64bit pref]
[ 0.639800] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[ 0.645148] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 0.651361] pci 0000:01:00.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.658269] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.666199] pci 0000:01:00.3: PCI bridge to [bus 07]
[ 0.671291] pci 0000:00:02.0: PCI bridge to [bus 01-07]
[ 0.676631] pci 0000:00:02.0: bridge window [io 0x2000-0x3fff]
[ 0.682846] pci 0000:00:02.0: bridge window [mem 0xc8100000-0xc82fffff]
[ 0.689753] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.697677] pci 0000:00:04.0: PCI bridge to [bus 08]
[ 0.702766] pci 0000:00:06.0: PCI bridge to [bus 09]
[ 0.707853] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 0.712938] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.719153] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.726058] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.733993] pci 0000:0b:01.0: BAR 6: assigned [mem 0xc8320000-0xc833ffff pref]
[ 0.741399] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[ 0.746486] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.752701] pci 0000:00:1e.0: bridge window [mem 0xc8300000-0xc83fffff]
[ 0.759609] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.767541] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.773232] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.779705] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
[ 0.785399] pci_bus 0000:01: resource 1 [mem 0xc8100000-0xc82fffff]
[ 0.791785] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.799186] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
[ 0.804880] pci_bus 0000:02: resource 1 [mem 0xc8100000-0xc82fffff]
[ 0.811269] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.818670] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.824364] pci_bus 0000:03: resource 1 [mem 0xc8100000-0xc81fffff]
[ 0.830750] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.838152] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.843845] pci_bus 0000:04: resource 1 [mem 0xc8100000-0xc81fffff]
[ 0.850234] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc00fffff 64bit pref]
[ 0.857635] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.863329] pci_bus 0000:06: resource 1 [mem 0xc8200000-0xc82fffff]
[ 0.869716] pci_bus 0000:06: resource 2 [mem 0xc0100000-0xc01fffff 64bit pref]
[ 0.877118] pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff]
[ 0.882811] pci_bus 0000:0a: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.889198] pci_bus 0000:0a: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.896601] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
[ 0.902296] pci_bus 0000:0b: resource 1 [mem 0xc8300000-0xc83fffff]
[ 0.908680] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.916081] pci_bus 0000:0b: resource 4 [io 0x0000-0xffff]
[ 0.921768] pci_bus 0000:0b: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.928287] NET: Registered protocol family 2
[ 0.933054] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.940605] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.947528] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.954232] TCP: reno registered
[ 0.957590] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.963745] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.970393] NET: Registered protocol family 1
[ 0.974992] RPC: Registered named UNIX socket transport module.
[ 0.981035] RPC: Registered udp transport module.
[ 0.985857] RPC: Registered tcp transport module.
[ 0.990679] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.997505] IOAPIC[0]: Set routing entry (2-17 -> 0x41 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 1.006184] IOAPIC[0]: Set routing entry (2-19 -> 0x51 -> IRQ 19 Mode:1 Active:1 Dest:15)
[ 1.014832] IOAPIC[0]: Set routing entry (2-18 -> 0x61 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 1.023482] IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 1.032020] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 1.038328] PCI: CLS mismatch (32 != 64), using 64 bytes
[ 1.043764] pci 0000:03:00.0: rerouting interrupts for [8086:0329]
[ 1.050062] pci 0000:03:00.2: rerouting interrupts for [8086:032a]
[ 1.056371] pci 0000:0b:01.0: Boot video device
[ 1.061112] Unpacking initramfs...
[ 3.624894] Freeing initrd memory: 122808K (ffff880078805000 - ffff88007fff3000)
[ 3.632525] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.639097] software IO TLB [mem 0xbbf60000-0xbff60000] (64MB) mapped at [ffff8800bbf60000-ffff8800bff5ffff]
[ 3.649259] Simple Boot Flag at 0x38 set to 0x1
[ 3.655085] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.661429] Initialise system trusted keyring
[ 3.665928] audit: initializing netlink subsys (disabled)
[ 3.671472] audit: type=2000 audit(1411603999.671:1): initialized
[ 3.678150] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.686786] zpool: loaded
[ 3.689531] zbud: loaded
[ 3.692348] VFS: Disk quotas dquot_6.5.2
[ 3.696444] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.703676] SGI XFS with ACLs, security attributes, no debug enabled
[ 3.710657] 9p: Installing v9fs 9p2000 file system support
[ 3.716306] msgmni has been set to 7896
[ 3.720336] Key type big_key registered
[ 3.724292] SELinux: Registering netfilter hooks
[ 3.730158] NET: Registered protocol family 38
[ 3.734735] Key type asymmetric registered
[ 3.738956] Asymmetric key parser 'x509' registered
[ 3.744011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.751652] io scheduler noop registered
[ 3.755690] io scheduler deadline registered (default)
[ 3.760960] io scheduler cfq registered
[ 3.765265] IOAPIC[0]: Set routing entry (2-16 -> 0x81 -> IRQ 16 Mode:1 Active:1 Dest:15)
[ 3.774121] IOAPIC[0]: Set routing entry (2-17 -> 0x91 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 3.782505] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.788074] IOAPIC[0]: Set routing entry (2-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 3.796511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.802225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.809027] intel_idle: does not run on family 6 model 15
[ 3.814653] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 3.825704] ACPI: Power Button [PWRB]
[ 3.829532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.837107] ACPI: Power Button [PWRF]
[ 3.841340] GHES: HEST is not enabled!
[ 3.845341] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.872235] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.900275] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.908296] hpet_acpi_add: no address or irqs in _CRS
[ 3.913522] Non-volatile memory driver v1.3
[ 3.917840] Linux agpgart interface v0.103
[ 3.922328] rdac: device handler registered
[ 3.926695] hp_sw: device handler registered
[ 3.931088] emc: device handler registered
[ 3.935307] alua: device handler registered
[ 3.939648] libphy: Fixed MDIO Bus: probed
[ 3.943908] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.951079] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.956968] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.962918] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.969076] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.978582] e1000e 0000:06:00.0: irq 25 for MSI/MSI-X
[ 4.041715] e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:30:48:30:70:e0
[ 4.049813] e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.056881] e1000e 0000:06:00.0 eth0: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
[ 4.063808] IOAPIC[0]: Set routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:1 Dest:15)
[ 4.072271] e1000e 0000:06:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.081776] e1000e 0000:06:00.1: irq 26 for MSI/MSI-X
[ 4.148209] e1000e 0000:06:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:30:48:30:70:e1
[ 4.156308] e1000e 0000:06:00.1 eth1: Intel(R) PRO/1000 Network Connection
[ 4.163384] e1000e 0000:06:00.1 eth1: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
[ 4.170230] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k
[ 4.177402] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.183129] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k
[ 4.191053] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[ 4.197025] usbcore: registered new interface driver catc
[ 4.202552] usbcore: registered new interface driver kaweth
[ 4.208249] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 4.215836] usbcore: registered new interface driver pegasus
[ 4.221622] usbcore: registered new interface driver rtl8150
[ 4.227412] usbcore: registered new interface driver asix
[ 4.232939] usbcore: registered new interface driver cdc_ether
[ 4.238900] usbcore: registered new interface driver cdc_eem
[ 4.244688] usbcore: registered new interface driver dm9601
[ 4.250390] usbcore: registered new interface driver smsc75xx
[ 4.256265] usbcore: registered new interface driver smsc95xx
[ 4.262137] usbcore: registered new interface driver gl620a
[ 4.267838] usbcore: registered new interface driver net1080
[ 4.273626] usbcore: registered new interface driver plusb
[ 4.279238] usbcore: registered new interface driver rndis_host
[ 4.285284] usbcore: registered new interface driver cdc_subset
[ 4.291333] usbcore: registered new interface driver zaurus
[ 4.297036] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 4.304628] usbcore: registered new interface driver int51x1
[ 4.310417] usbcore: registered new interface driver ipheth
[ 4.316124] usbcore: registered new interface driver sierra_net
[ 4.322252] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.328915] ehci-pci: EHCI PCI platform driver
[ 4.333672] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.339079] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 4.346674] ehci-pci 0000:00:1d.7: debug port 1
[ 4.355227] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.362150] ehci-pci 0000:00:1d.7: irq 17, io mem 0xc8000000
[ 4.373020] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.378955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.385862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.393263] usb usb1: Product: EHCI Host Controller
[ 4.398262] usb usb1: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 ehci_hcd
[ 4.405429] usb usb1: SerialNumber: 0000:00:1d.7
[ 4.410296] hub 1-0:1.0: USB hub found
[ 4.414176] hub 1-0:1.0: 6 ports detected
[ 4.418469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.424771] ohci-pci: OHCI PCI platform driver
[ 4.429347] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.436019] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.441431] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.449014] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.454024] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
[ 4.459938] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.466843] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.474244] usb usb2: Product: UHCI Host Controller
[ 4.479245] usb usb2: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 uhci_hcd
[ 4.486413] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.491268] hub 2-0:1.0: USB hub found
[ 4.495150] hub 2-0:1.0: 2 ports detected
[ 4.499546] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.504945] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 4.512529] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.517554] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 4.523466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.530371] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.537779] usb usb3: Product: UHCI Host Controller
[ 4.542772] usb usb3: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 uhci_hcd
[ 4.549939] usb usb3: SerialNumber: 0000:00:1d.1
[ 4.554790] hub 3-0:1.0: USB hub found
[ 4.558664] hub 3-0:1.0: 2 ports detected
[ 4.563047] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.568444] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.576030] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.581053] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 4.586964] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.593871] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.601280] usb usb4: Product: UHCI Host Controller
[ 4.606271] usb usb4: Manufacturer: Linux 3.17.0-rc2-00011-g4ab2ee7 uhci_hcd
[ 4.613438] usb usb4: SerialNumber: 0000:00:1d.2
[ 4.618310] hub 4-0:1.0: USB hub found
[ 4.622184] hub 4-0:1.0: 2 ports detected
[ 4.626491] usbcore: registered new interface driver usbserial
[ 4.632455] usbcore: registered new interface driver usbserial_generic
[ 4.639110] usbserial: USB Serial support registered for generic
[ 4.645264] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.654470] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.656027] tsc: Refined TSC clocksource calibration: 2666.669 MHz
[ 4.665876] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.671170] mousedev: PS/2 mouse device common for all mice
[ 4.677088] rtc_cmos 00:01: RTC can wake from S4
[ 4.681978] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 4.688212] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 4.695061] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.700775] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
[ 4.708814] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.714955] iTCO_vendor_support: vendor-support=0
[ 4.720224] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.725887] usbcore: registered new interface driver usbhid
[ 4.731582] usbhid: USB HID core driver
[ 4.735575] drop_monitor: Initializing network drop monitor service
[ 4.742041] TCP: cubic registered
[ 4.745480] Initializing XFRM netlink socket
[ 4.750057] NET: Registered protocol family 10
[ 4.754974] NET: Registered protocol family 17
[ 4.759555] 9pnet: Installing 9P2000 support
[ 4.764260]
[ 4.764260] printing PIC contents
[ 4.769234] ... PIC IMR: ffff
[ 4.770228] ... PIC IRR: 0c21
[ 4.775580] ... PIC ISR: 0000
[ 4.778758] ... PIC ELCR: 0e20
[ 4.781933] printing local APIC contents on CPU#0/0:
[ 4.782930] ... APIC ID: 00000000 (0)
[ 4.782930] ... APIC VERSION: 00050014
[ 4.782930] ... APIC TASKPRI: 00000000 (00)
[ 4.782930] ... APIC PROCPRI: 00000000
[ 4.782930] ... APIC LDR: 01000000
[ 4.782930] ... APIC DFR: ffffffff
[ 4.782930] ... APIC SPIV: 000001ff
[ 4.782930] ... APIC ISR field:
[ 4.782930] 0000000000000000000000000000000000000000000000000000000000000000
[ 4.782930] ... APIC TMR field:
[ 4.782930] 0000000000000000000000000000000000020002000200020000000000000000
[ 4.782930] ... APIC IRR field:
[ 4.782930] 0000000000000000000000000000000000000000000000000000000020000000
[ 4.782930] ... APIC ESR: 00000000
[ 4.782930] ... APIC ICR: 000008fd
[ 4.782930] ... APIC ICR2: 08000000
[ 4.782930] ... APIC LVTT: 000000ef
[ 4.782930] ... APIC LVTPC: 00000400
[ 4.782930] ... APIC LVT0: 00010700
[ 4.782930] ... APIC LVT1: 00000400
[ 4.782930] ... APIC LVTERR: 000000fe
[ 4.782930] ... APIC TMICT: 0062472c
[ 4.782930] ... APIC TMCCT: 003a46b8
[ 4.782930] ... APIC TDCR: 00000003
[ 4.782930]
[ 4.889518] number of MP IRQ sources: 15.
[ 4.893649] number of IO-APIC #2 registers: 24.
[ 4.898294] number of IO-APIC #3 registers: 24.
[ 4.902939] testing the IO APIC.......................
[ 4.908195] IO APIC #2......
[ 4.911191] .... register #00: 02000000
[ 4.915142] ....... : physical APIC id: 02
[ 4.919613] ....... : Delivery Type: 0
[ 4.923740] ....... : LTS : 0
[ 4.927867] .... register #01: 00170020
[ 4.931817] ....... : max redirection entries: 17
[ 4.936981] ....... : PRQ implemented: 0
[ 4.941367] ....... : IO APIC version: 20
[ 4.945838] .... IRQ redirection table:
[ 4.949796] 1 0 0 0 0 0 0 00
[ 4.954451] 0 0 0 0 0 1 1 31
[ 4.959102] 0 0 0 0 0 1 1 30
[ 4.963757] 0 0 0 0 0 1 1 33
[ 4.968410] 0 0 0 0 0 1 1 34
[ 4.973063] 0 0 0 0 0 1 1 35
[ 4.977710] 0 0 0 0 0 1 1 36
[ 4.982362] 0 0 0 0 0 1 1 37
[ 4.983020] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 4.993569] 0 0 0 0 0 1 1 38
[ 4.998214] 0 1 0 0 0 1 1 39
[ 5.002864] 0 0 0 0 0 1 1 3A
[ 5.007521] 0 0 0 0 0 1 1 3B
[ 5.012179] 0 0 0 0 0 1 1 3C
[ 5.016831] 0 0 0 0 0 1 1 3D
[ 5.021486] 0 0 0 0 0 1 1 3E
[ 5.026146] 0 0 0 0 0 1 1 3F
[ 5.030794] 1 1 0 1 0 1 1 81
[ 5.035446] 0 1 0 1 0 1 1 91
[ 5.040102] 0 1 0 1 0 1 1 B1
[ 5.044754] 0 1 0 1 0 1 1 D1
[ 5.049399] 1 0 0 0 0 0 0 00
[ 5.054044] 1 0 0 0 0 0 0 00
[ 5.058690] 1 0 0 0 0 0 0 00
[ 5.063336] 1 0 0 0 0 0 0 00
[ 5.067993] IO APIC #3......
[ 5.070995] .... register #00: 03000000
[ 5.074965] ....... : physical APIC id: 03
[ 5.079436] ....... : Delivery Type: 0
[ 5.083560] ....... : LTS : 0
[ 5.087686] .... register #01: 00178020
[ 5.091639] ....... : max redirection entries: 17
[ 5.096803] ....... : PRQ implemented: 1
[ 5.101189] ....... : IO APIC version: 20
[ 5.105662] .... register #02: 03000000
[ 5.109614] ....... : arbitration: 03
[ 5.113737] .... register #03: 00000001
[ 5.117691] ....... : Boot DT : 1
[ 5.121728] .... IRQ redirection table:
[ 5.125685] 1 0 0 0 0 0 0 00
[ 5.130344] 1 0 0 0 0 0 0 00
[ 5.134991] 1 0 0 0 0 0 0 00
[ 5.139637] 1 0 0 0 0 0 0 00
[ 5.144290] 1 0 0 0 0 0 0 00
[ 5.148934] 1 0 0 0 0 0 0 00
[ 5.153581] 1 0 0 0 0 0 0 00
[ 5.158228] 1 0 0 0 0 0 0 00
[ 5.162891] 1 0 0 0 0 0 0 00
[ 5.167545] 1 0 0 0 0 0 0 00
[ 5.172197] 1 0 0 0 0 0 0 00
[ 5.176843] 1 0 0 0 0 0 0 00
[ 5.181495] 1 0 0 0 0 0 0 00
[ 5.186141] 1 0 0 0 0 0 0 00
[ 5.190796] 1 0 0 0 0 0 0 00
[ 5.195451] 1 0 0 0 0 0 0 00
[ 5.200109] 1 0 0 0 0 0 0 00
[ 5.204757] 1 0 0 0 0 0 0 00
[ 5.209404] 1 0 0 0 0 0 0 00
[ 5.214059] 1 0 0 0 0 0 0 00
[ 5.218718] 1 0 0 0 0 0 0 00
[ 5.223366] 1 0 0 0 0 0 0 00
[ 5.224939] usb 2-2: New USB device found, idVendor=0557, idProduct=2220
[ 5.224941] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.224942] usb 2-2: Product: ATEN CS-1758/54
[ 5.224944] usb 2-2: Manufacturer: ATEN
[ 5.250641] 1 0 0 0 0 0 0 00
[ 5.255293] 1 0 0 0 0 0 0 00
[ 5.259949] IRQ to pin mappings:
[ 5.263301] IRQ0 -> 0:2
[ 5.265996] IRQ1 -> 0:1
[ 5.268693] IRQ3 -> 0:3
[ 5.271397] IRQ4 -> 0:4
[ 5.274097] IRQ5 -> 0:5
[ 5.276796] IRQ6 -> 0:6
[ 5.279491] IRQ7 -> 0:7
[ 5.282210] IRQ8 -> 0:8
[ 5.284890] IRQ9 -> 0:9
[ 5.287584] IRQ10 -> 0:10
[ 5.290447] IRQ11 -> 0:11
[ 5.293313] IRQ12 -> 0:12
[ 5.296180] IRQ13 -> 0:13
[ 5.299040] IRQ14 -> 0:14
[ 5.301904] IRQ15 -> 0:15
[ 5.304771] IRQ16 -> 0:16
[ 5.307630] IRQ17
[ 5.309378] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:0557:2220.0001/input/input5
[ 5.309489] hid-generic 0003:0557:2220.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.0-2/input0
[ 5.333470] -> 0:17
[ 5.336064] IRQ18 -> 0:18
[ 5.338927] IRQ19 -> 0:19
[ 5.341796] .................................... done.
[ 5.347217] Loading compiled-in X.509 certificates
[ 5.353229] Loaded X.509 cert 'Magrathea: Glacier signing key: 147c3461adf97819cd11ff63674270cbc5962740'
[ 5.362931] registered taskstats version 1
[ 5.363295] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:0557:2220.0002/input/input6
[ 5.363378] hid-generic 0003:0557:2220.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.0-2/input1
[ 5.393109] Key type trusted registered
[ 5.398660] Key type encrypted registered
[ 5.404405] ima: No TPM chip found, activating TPM-bypass!
[ 5.410055] evm: HMAC attrs: 0x1
[ 5.413893] rtc_cmos 00:01: setting system clock to 2014-09-25 00:13:24 UTC (1411604004)
[ 5.447469] ------------[ cut here ]------------
[ 5.452212] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 5.462479] Modules linked in:
[ 5.465712] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.473467] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.480202] 0000000000000009 ffff880139ab7c00 ffffffff8185b75a 0000000000000000
[ 5.488043] ffff880139ab7c38 ffffffff8107056d 0000000000000001 ffff88007f8ec000
[ 5.495879] ffff88013974e098 ffff88013974e000 ffff88007f8ecdb8 ffff880139ab7c48
[ 5.503722] Call Trace:
[ 5.506293] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.511552] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.517675] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 5.523631] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 5.529932] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 5.535368] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.540712] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.546754] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.552534] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.558314] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.564529] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.569876] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.576091] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 5.581871] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 5.587826] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 5.593436] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 5.599735] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.605079] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 5.610341] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 5.615861] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.621207] ---[ end trace 3e09fff841f00690 ]---
[ 5.625958] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X
[ 5.631145] e1000e 0000:06:00.0: irq 28 for MSI/MSI-X
[ 5.636319] ------------[ cut here ]------------
[ 5.641057] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 5.650197] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:02.0/0000:06:00.0/msi_irqs'
[ 5.662464] Modules linked in:
[ 5.665695] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.674576] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.681311] 0000000000000009 ffff880139ab7ad8 ffffffff8185b75a ffff880139ab7b20
[ 5.689154] ffff880139ab7b10 ffffffff8107056d ffff880139757000 ffffffff81b63eab
[ 5.697019] ffff880139735780 ffff88013975ae00 ffff88013974e000 ffff880139ab7b70
[ 5.704869] Call Trace:
[ 5.707434] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.712693] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.718822] [<ffffffff810705dc>] warn_slowpath_fmt+0x4c/0x50
[ 5.726258] [<ffffffff812530a8>] ? kernfs_path+0x48/0x60
[ 5.731778] [<ffffffff81256a64>] sysfs_warn_dup+0x64/0x80
[ 5.737385] [<ffffffff812574d7>] internal_create_group+0x277/0x280
[ 5.743773] [<ffffffff81257609>] sysfs_create_groups+0x49/0xa0
[ 5.749813] [<ffffffff814492ad>] populate_msi_sysfs+0x1bd/0x200
[ 5.755939] [<ffffffff8144985f>] pci_enable_msi_range+0x1bf/0x2f0
[ 5.762250] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 5.767685] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.773030] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.779072] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.784853] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.790632] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.796846] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.802186] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.808401] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 5.814181] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 5.820135] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 5.825742] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 5.832042] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.837391] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 5.842649] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 5.848170] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 5.853509] ---[ end trace 3e09fff841f00691 ]---
[ 5.858259] ------------[ cut here ]------------
[ 5.858262] Switched to clocksource tsc
[ 5.866941] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 5.877208] Modules linked in:
[ 5.880438] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 5.889317] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 5.896040] 0000000000000009 ffff880139ab7be8 ffffffff8185b75a 0000000000000000
[ 5.903871] ffff880139ab7c20 ffffffff8107056d 0000000000000001 ffff88007f8ec000
[ 5.911707] ffff88013974e098 ffff88013974e000 ffff88007f8ecdb8 ffff880139ab7c30
[ 5.919540] Call Trace:
[ 5.922103] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 5.927355] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 5.933473] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 5.939417] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 5.945709] [<ffffffff814498c7>] ? pci_enable_msi_range+0x227/0x2f0
[ 5.952177] [<ffffffff815afa56>] e1000e_set_interrupt_capability+0x46/0x130
[ 5.959343] [<ffffffff815b49d1>] e1000_open+0x2f1/0x4b0
[ 5.964770] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 5.970108] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 5.976140] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 5.981910] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 5.987683] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 5.993887] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 5.999227] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.005431] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.011203] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.017148] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.022749] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.029039] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.034380] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.039631] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.045143] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.050480] ---[ end trace 3e09fff841f00692 ]---
[ 6.055229] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X
[ 6.060517] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.091833] ------------[ cut here ]------------
[ 6.096564] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 6.106829] Modules linked in:
[ 6.110063] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 6.118939] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 6.125663] 0000000000000009 ffff880139ab7c00 ffffffff8185b75a 0000000000000000
[ 6.133495] ffff880139ab7c38 ffffffff8107056d 0000000000000001 ffff88007f8f8000
[ 6.141329] ffff88013974f098 ffff88013974f000 ffff88007f8f8db8 ffff880139ab7c48
[ 6.149165] Call Trace:
[ 6.151726] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 6.156978] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 6.163095] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 6.169039] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 6.175333] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 6.180758] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 6.186097] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 6.192127] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 6.197900] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 6.203672] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.209880] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 6.215217] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.221422] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.227194] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.233140] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.238737] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.245029] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.250369] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.255620] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.261132] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.266471] ---[ end trace 3e09fff841f00693 ]---
[ 6.271218] e1000e 0000:06:00.1: irq 28 for MSI/MSI-X
[ 6.276397] e1000e 0000:06:00.1: irq 29 for MSI/MSI-X
[ 6.281563] ------------[ cut here ]------------
[ 6.286292] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 6.295425] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:02.0/0000:06:00.1/msi_irqs'
[ 6.307687] Modules linked in:
[ 6.310920] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 6.319794] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 6.326520] 0000000000000009 ffff880139ab7ad8 ffffffff8185b75a ffff880139ab7b20
[ 6.334354] ffff880139ab7b10 ffffffff8107056d ffff880139757000 ffffffff81b63eab
[ 6.342188] ffff8801397369d8 ffff88013975aea0 ffff88013974f000 ffff880139ab7b70
[ 6.350023] Call Trace:
[ 6.352582] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 6.357836] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 6.363955] [<ffffffff810705dc>] warn_slowpath_fmt+0x4c/0x50
[ 6.369813] [<ffffffff812530a8>] ? kernfs_path+0x48/0x60
[ 6.375323] [<ffffffff81256a64>] sysfs_warn_dup+0x64/0x80
[ 6.380924] [<ffffffff812574d7>] internal_create_group+0x277/0x280
[ 6.387302] [<ffffffff81257609>] sysfs_create_groups+0x49/0xa0
[ 6.393334] [<ffffffff814492ad>] populate_msi_sysfs+0x1bd/0x200
[ 6.399452] [<ffffffff8144985f>] pci_enable_msi_range+0x1bf/0x2f0
[ 6.405743] [<ffffffff815b490a>] e1000_open+0x22a/0x4b0
[ 6.411169] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 6.416508] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 6.422540] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 6.428313] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 6.434084] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.440290] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 6.445628] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.451832] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.457607] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.463552] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.469149] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.475440] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.480779] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.486031] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.491544] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.496882] ---[ end trace 3e09fff841f00694 ]---
[ 6.501618] ------------[ cut here ]------------
[ 6.506347] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0()
[ 6.516615] Modules linked in:
[ 6.519846] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.17.0-rc2-00011-g4ab2ee7 #1
[ 6.528723] Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 04/28/2006
[ 6.535448] 0000000000000009 ffff880139ab7be8 ffffffff8185b75a 0000000000000000
[ 6.543273] ffff880139ab7c20 ffffffff8107056d 0000000000000001 ffff88007f8f8000
[ 6.551108] ffff88013974f098 ffff88013974f000 ffff88007f8f8db8 ffff880139ab7c30
[ 6.558942] Call Trace:
[ 6.561501] [<ffffffff8185b75a>] dump_stack+0x4d/0x66
[ 6.566753] [<ffffffff8107056d>] warn_slowpath_common+0x7d/0xa0
[ 6.572870] [<ffffffff8107064a>] warn_slowpath_null+0x1a/0x20
[ 6.578817] [<ffffffff81449961>] pci_enable_msi_range+0x2c1/0x2f0
[ 6.585109] [<ffffffff814498c7>] ? pci_enable_msi_range+0x227/0x2f0
[ 6.591575] [<ffffffff815afa56>] e1000e_set_interrupt_capability+0x46/0x130
[ 6.598741] [<ffffffff815b49d1>] e1000_open+0x2f1/0x4b0
[ 6.604166] [<ffffffff8172d466>] __dev_open+0xb6/0x130
[ 6.609505] [<ffffffff8172d77d>] __dev_change_flags+0x9d/0x160
[ 6.615538] [<ffffffff8172d869>] dev_change_flags+0x29/0x70
[ 6.621309] [<ffffffff81e5707e>] ip_auto_config+0x1c4/0xe7f
[ 6.627082] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.633288] [<ffffffff81405f1e>] ? kasprintf+0x3e/0x40
[ 6.638625] [<ffffffff81e56eba>] ? root_nfs_parse_addr+0xba/0xba
[ 6.644832] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
[ 6.650602] [<ffffffff81002130>] ? do_one_initcall+0xc0/0x1f0
[ 6.656549] [<ffffffff8108f000>] ? parse_args+0x180/0x4e0
[ 6.662150] [<ffffffff81df511b>] kernel_init_freeable+0x1b3/0x23b
[ 6.668447] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.673786] [<ffffffff8184ed7e>] kernel_init+0xe/0xf0
[ 6.679040] [<ffffffff8186437c>] ret_from_fork+0x7c/0xb0
[ 6.684550] [<ffffffff8184ed70>] ? rest_init+0x90/0x90
[ 6.689889] ---[ end trace 3e09fff841f00695 ]---
[ 6.694635] e1000e 0000:06:00.1: irq 28 for MSI/MSI-X
[ 6.701485] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 8.195378] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.209012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.220006] Sending DHCP requests .., OK
[ 11.553017] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.134
[ 11.618083] e1000e: eth1 NIC Link is Down
[ 11.622301] IP-Config: Complete:
[ 11.625648] device=eth0, hwaddr=00:30:48:30:70:e0, ipaddr=192.168.1.134, mask=255.255.255.0, gw=192.168.1.1
[ 11.636005] host=bens, domain=lkp.intel.com, nis-domain=(none)
[ 11.642384] bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
[ 11.649132] nameserver0=192.168.1.1
[ 11.653548] PM: Hibernation image not present or could not be loaded.
[ 11.661752] Freeing unused kernel memory: 1804K (ffffffff81dde000 - ffffffff81fa1000)
[ 11.847955] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.876783] i5k_amb: probe of i5k_amb.0 failed with error -16
[ 11.887143] EDAC MC: Ver: 3.0.0
[ 11.890564] aic79xx 0000:04:02.0: enabling device (0152 -> 0153)
[ 11.896805] aic79xx 0000:04:02.0: PCI IRQ 16 -> rerouted to legacy IRQ 16
[ 11.906404] EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
[ 11.916285] EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
[ 12.089956] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.101511] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 12.107965] libata version 3.00 loaded.
[ 12.113737] ata_piix 0000:00:1f.2: version 2.13
[ 12.118577] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 12.124448] scsi host1: ata_piix
[ 12.127992] scsi host2: ata_piix
[ 12.131441] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1870 irq 14
[ 12.131460] Error: Driver 'pcspkr' is already registered, aborting...
[ 12.145085] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1878 irq 15
[ 12.306291] ata1.00: ATA-6: ST3120026AS, 3.00, max UDMA/133
[ 12.311991] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 12.324264] ata1.00: configured for UDMA/133
[ 12.328800] scsi 1:0:0:0: Direct-Access ATA ST3120026AS 3.00 PQ: 0 ANSI: 5
[ 12.475293] ata2.01: ATAPI: LITE-ON COMBO SOHC-5236V, R$0C, max UDMA/44
[ 12.482043] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 12.509174] ata2.01: configured for UDMA/33
[ 12.515364] scsi 2:0:1:0: CD-ROM LITE-ON COMBO SOHC-5236V R$0C PQ: 0 ANSI: 5
[ 12.559324] sr 2:0:1:0: [sr0] scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 12.567348] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.573046] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 12.575070] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 12.575137] sd 1:0:0:0: [sda] Write Protect is off
[ 12.575139] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.575167] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.608401] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 12.613881] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 12.648736] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 12.654820] sd 1:0:0:0: [sda] Attached SCSI disk
[ 12.966888] random: nonblocking pool is initialized
[ 15.120033] floppy0: no floppy controllers found
[ 27.020029] scsi host0: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 27.020029] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 27.020029] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs
[ 27.040829] aic79xx 0000:04:02.1: enabling device (0152 -> 0153)
[ 27.047034] aic79xx 0000:04:02.1: PCI IRQ 17 -> rerouted to legacy IRQ 17
[ 28.846321] scsi 0:0:8:0: Processor SUPER GEM359 REV001 1.09 PQ: 0 ANSI: 2
[ 28.854622] scsi target0:0:8: asynchronous
[ 28.858844] scsi target0:0:8: Beginning Domain Validation
[ 28.876294] scsi target0:0:8: Ending Domain Validation
[ 30.687208] scsi 0:0:8:0: Attached scsi generic sg2 type 3
[ 42.170020] scsi host3: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 42.170020] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 42.170020] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs
[ 46.081511] fuse init (API version 7.23)
[ 46.190555] device-mapper: uevent: version 1.0.3
[ 46.195482] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 47.125508] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
==> /lkp/lkp/src/tmp/run_log <==
==> /lkp/lkp/src/tmp/err_log <==
==> /lkp/lkp/src/tmp/run_log <==
25 Sep 00:14:13 ntpdate[1648]: step time server 192.168.1.1 offset 0.247349 sec
Kernel tests: Boot OK!
LKP: HOSTNAME bens, MAC 00:30:48:30:70:e0, kernel 3.17.0-rc2-00011-g4ab2ee7 1, serial console /dev/ttyS0
/lkp/lkp/src/bin/run-lkp
[ 53.967340] ipmi message handler version 39.2
[ 53.973425] IPMI Watchdog: driver initialized
Stopping watchdog keepalive daemon....
Starting watchdog daemon...RESULT_ROOT=/result/bens/boot/performance-1/debian-x86_64.cgz/x86_64-rhel/4ab2ee7c77875669230
[ 54.001783] bmc-watchdog:1700 map pfn expected mapping type uncached-minus for [mem 0x00000000-0x00000fff], got write-back
a797a3ed2228990f82545/0
job=/lkp/scheduled/bens/bisect_boot-performance-1-x86_64-rhel-4ab2ee7c77875669230a797a3ed2228990f82545-0.yaml
[-- Attachment #3: Type: text/plain, Size: 85 bytes --]
_______________________________________________
LKP mailing list
LKP@linux.intel.com
next reply other threads:[~2014-09-25 3:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 3:04 Fengguang Wu [this message]
2014-09-25 3:04 ` [PCI/MSI] WARNING: CPU: 0 PID: 1 at drivers/pci/msi.c:1034 pci_enable_msi_range+0x2c1/0x2f0() Fengguang Wu
2014-09-25 8:42 ` Alexander Gordeev
2014-09-25 8:42 ` Alexander Gordeev
2014-09-25 14:59 ` Bjorn Helgaas
2014-09-25 14:59 ` Bjorn Helgaas
-- strict thread matches above, loose matches on Subject: below --
2014-10-03 13:25 Fengguang Wu
2014-10-03 13:25 ` Fengguang Wu
2014-10-03 14:15 ` Alexander Gordeev
2014-10-03 14:15 ` Alexander Gordeev
2014-10-03 14:24 ` Bjorn Helgaas
2014-10-03 14:24 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140925030459.GB13564@localhost \
--to=fengguang.wu@intel.com \
--cc=lkp@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.