All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bhelgaas@google.com>
To: Tanmay Inamdar <tinamdar@apm.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
	Grant Likely <grant.likely@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Rob Landley <rob@landley.net>, Liviu Dudau <liviu.dudau@arm.com>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, patches@apm.com, jcm@redhat.com
Subject: Re: [PATCH v10 0/4] APM X-Gene PCIe host controller
Date: Wed, 1 Oct 2014 13:14:03 -0600	[thread overview]
Message-ID: <20141001191403.GC22713@google.com> (raw)
In-Reply-To: <1411765707-28822-1-git-send-email-tinamdar@apm.com>

On Fri, Sep 26, 2014 at 02:08:23PM -0700, Tanmay Inamdar wrote:
> This patch adds support for AppliedMicro X-Gene PCIe host controller. The
> driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
> cards.
> 
> X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
> Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
> support for creating generic pcie bridge from device tree. Liviu's patches
> are available here
> https://lkml.org/lkml/2014/9/23/852
> 
> If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
> patches from Liviu must be applied before the patches in this patch set. Also
> please use latest xgene u-boot firmware.

I applied these on pci/host-xgene (based on pci/host-generic).  I hope to
merge these for v3.18.  It'd be nice to have a device tree person like Arnd
or Rob take a look at the arch/arm64/boot/dts/ bits.

> changes since V9:
> 1. Remove 'xgene_pcie_fixup_bridge' and hide the bridge BAR0 and BAR1 by
>    faking bridge's config space read and write to BAR0 and BAR1.
> 2. Remove whitespace and fit in one line.
> 3. Follow usual block comment.
> 4. user '%pR' for printing out resource info
> 5. Add device and vendor ID programming to make driver operable with older
>    firmware.
> 
> changes since V8:
> 1. Add 'dma-coherent' attribute in device node.
> 
> changes since V7:
> 1. Fix outbound region mapping for IO region. Thanks Liviu for the catch.
> 
> changes since V6:
> 1. Port driver to changed interface as per Liviu's v10 series.
> 
> changes since V5:
> 1. Port driver to changed interface of 'of_create_pci_host_bridge'
> 2. Fix the prefetch bit setting
> 3. Removed bunch of register programming which is already done by firmware
> 
> changes since V4:
> 1. fix section mismatch warnings
> 2. fix the patch description
> 3. fix indentation
> 4. update read/write cfg functions by passing both addr and offset.
> 5. use 'time_before' for timeout.
> 6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
> 7. remove BUG_ON for pci_ioremap_io.
> 
> changes since V3:
> 1. remove 'struct hw_pci' and supporting ops in hw_pci
> 2. add code to create the host bridge from dts
> 3. add code to scan the the host bridge
> 4. modify outbound windows setup function to get resource information from
>    'bridge->windows'
> 5. add compatible string in pcie dts node with current X-Gene SOC name.
> 
> changes since V2:
> 1. redefined each PCI port in different PCI domain correctly.
> 2. removed setup_lane and setup_link functions from driver.
> 3. removed scan_bus wrapper and set_primary_bus hack.
> 4. added pci_ioremap_io for io resources.
> 
> changes since V1:
> 1. added PCI domain support
> 2. reading cpu and pci addresses from device tree to configure regions.
> 3. got rid of unnecessary wrappers for readl and writel.
> 4. got rid of endpoint configuration code.
> 5. added 'dma-ranges' property support to read inbound region configuration.
> 6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
> 7. dropped 'clock-names' property from bindings
> 8. added comments whereever requested.
> 
> Tanmay Inamdar (4):
>   pci:host: APM X-Gene PCIe host controller driver
>   arm64: dts: APM X-Gene PCIe device tree nodes
>   dt-bindings: pci: xgene pcie device tree bindings
>   MAINTAINERS: entry for APM X-Gene PCIe host driver
> 
>  .../devicetree/bindings/pci/xgene-pci.txt          |  57 ++
>  MAINTAINERS                                        |   8 +
>  arch/arm64/boot/dts/apm-mustang.dts                |   8 +
>  arch/arm64/boot/dts/apm-storm.dtsi                 | 165 ++++++
>  drivers/pci/host/Kconfig                           |  10 +
>  drivers/pci/host/Makefile                          |   1 +
>  drivers/pci/host/pci-xgene.c                       | 659 +++++++++++++++++++++
>  7 files changed, 908 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
>  create mode 100644 drivers/pci/host/pci-xgene.c
> 
> -- 
> 1.9.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: bhelgaas@google.com (Bjorn Helgaas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 0/4] APM X-Gene PCIe host controller
Date: Wed, 1 Oct 2014 13:14:03 -0600	[thread overview]
Message-ID: <20141001191403.GC22713@google.com> (raw)
In-Reply-To: <1411765707-28822-1-git-send-email-tinamdar@apm.com>

On Fri, Sep 26, 2014 at 02:08:23PM -0700, Tanmay Inamdar wrote:
> This patch adds support for AppliedMicro X-Gene PCIe host controller. The
> driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
> cards.
> 
> X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
> Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
> support for creating generic pcie bridge from device tree. Liviu's patches
> are available here
> https://lkml.org/lkml/2014/9/23/852
> 
> If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
> patches from Liviu must be applied before the patches in this patch set. Also
> please use latest xgene u-boot firmware.

I applied these on pci/host-xgene (based on pci/host-generic).  I hope to
merge these for v3.18.  It'd be nice to have a device tree person like Arnd
or Rob take a look at the arch/arm64/boot/dts/ bits.

> changes since V9:
> 1. Remove 'xgene_pcie_fixup_bridge' and hide the bridge BAR0 and BAR1 by
>    faking bridge's config space read and write to BAR0 and BAR1.
> 2. Remove whitespace and fit in one line.
> 3. Follow usual block comment.
> 4. user '%pR' for printing out resource info
> 5. Add device and vendor ID programming to make driver operable with older
>    firmware.
> 
> changes since V8:
> 1. Add 'dma-coherent' attribute in device node.
> 
> changes since V7:
> 1. Fix outbound region mapping for IO region. Thanks Liviu for the catch.
> 
> changes since V6:
> 1. Port driver to changed interface as per Liviu's v10 series.
> 
> changes since V5:
> 1. Port driver to changed interface of 'of_create_pci_host_bridge'
> 2. Fix the prefetch bit setting
> 3. Removed bunch of register programming which is already done by firmware
> 
> changes since V4:
> 1. fix section mismatch warnings
> 2. fix the patch description
> 3. fix indentation
> 4. update read/write cfg functions by passing both addr and offset.
> 5. use 'time_before' for timeout.
> 6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
> 7. remove BUG_ON for pci_ioremap_io.
> 
> changes since V3:
> 1. remove 'struct hw_pci' and supporting ops in hw_pci
> 2. add code to create the host bridge from dts
> 3. add code to scan the the host bridge
> 4. modify outbound windows setup function to get resource information from
>    'bridge->windows'
> 5. add compatible string in pcie dts node with current X-Gene SOC name.
> 
> changes since V2:
> 1. redefined each PCI port in different PCI domain correctly.
> 2. removed setup_lane and setup_link functions from driver.
> 3. removed scan_bus wrapper and set_primary_bus hack.
> 4. added pci_ioremap_io for io resources.
> 
> changes since V1:
> 1. added PCI domain support
> 2. reading cpu and pci addresses from device tree to configure regions.
> 3. got rid of unnecessary wrappers for readl and writel.
> 4. got rid of endpoint configuration code.
> 5. added 'dma-ranges' property support to read inbound region configuration.
> 6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
> 7. dropped 'clock-names' property from bindings
> 8. added comments whereever requested.
> 
> Tanmay Inamdar (4):
>   pci:host: APM X-Gene PCIe host controller driver
>   arm64: dts: APM X-Gene PCIe device tree nodes
>   dt-bindings: pci: xgene pcie device tree bindings
>   MAINTAINERS: entry for APM X-Gene PCIe host driver
> 
>  .../devicetree/bindings/pci/xgene-pci.txt          |  57 ++
>  MAINTAINERS                                        |   8 +
>  arch/arm64/boot/dts/apm-mustang.dts                |   8 +
>  arch/arm64/boot/dts/apm-storm.dtsi                 | 165 ++++++
>  drivers/pci/host/Kconfig                           |  10 +
>  drivers/pci/host/Makefile                          |   1 +
>  drivers/pci/host/pci-xgene.c                       | 659 +++++++++++++++++++++
>  7 files changed, 908 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
>  create mode 100644 drivers/pci/host/pci-xgene.c
> 
> -- 
> 1.9.1
> 

  parent reply	other threads:[~2014-10-01 19:14 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-26 21:08 [PATCH v10 0/4] APM X-Gene PCIe host controller Tanmay Inamdar
2014-09-26 21:08 ` Tanmay Inamdar
2014-09-26 21:08 ` [PATCH v10 1/4] pci:host: APM X-Gene PCIe host controller driver Tanmay Inamdar
2014-09-26 21:08   ` Tanmay Inamdar
2014-09-26 21:08 ` [PATCH v10 2/4] arm64: dts: APM X-Gene PCIe device tree nodes Tanmay Inamdar
2014-09-26 21:08   ` Tanmay Inamdar
2014-09-26 21:08 ` [PATCH v10 3/4] dt-bindings: pci: xgene pcie device tree bindings Tanmay Inamdar
2014-09-26 21:08   ` Tanmay Inamdar
2014-09-26 21:08 ` [PATCH v10 4/4] MAINTAINERS: entry for APM X-Gene PCIe host driver Tanmay Inamdar
2014-09-26 21:08   ` Tanmay Inamdar
2014-10-01 19:14 ` Bjorn Helgaas [this message]
2014-10-01 19:14   ` [PATCH v10 0/4] APM X-Gene PCIe host controller Bjorn Helgaas
2014-10-02 12:20   ` Arnd Bergmann
2014-10-02 12:20     ` Arnd Bergmann
2014-10-02 14:36     ` Bjorn Helgaas
2014-10-02 14:36       ` Bjorn Helgaas
2014-10-02 19:24       ` Tanmay Inamdar
2014-10-02 19:24         ` Tanmay Inamdar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141001191403.GC22713@google.com \
    --to=bhelgaas@google.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=grant.likely@linaro.org \
    --cc=jcm@redhat.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liviu.dudau@arm.com \
    --cc=patches@apm.com \
    --cc=rob@landley.net \
    --cc=robh+dt@kernel.org \
    --cc=tinamdar@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.