From: Jeff King <peff@peff.net>
To: git@vger.kernel.org
Cc: Michael Haggerty <mhagger@alum.mit.edu>
Subject: [PATCH 11/16] count-objects: use for_each_loose_file_in_objdir
Date: Fri, 3 Oct 2014 16:31:50 -0400 [thread overview]
Message-ID: <20141003203150.GK16293@peff.net> (raw)
In-Reply-To: <20141003202045.GA15205@peff.net>
This drops our line count considerably, and should make
things more readable by keeping the counting logic separate
from the traversal.
Signed-off-by: Jeff King <peff@peff.net>
---
builtin/count-objects.c | 101 ++++++++++++++----------------------------------
1 file changed, 30 insertions(+), 71 deletions(-)
diff --git a/builtin/count-objects.c b/builtin/count-objects.c
index 316a805..e47ef0b 100644
--- a/builtin/count-objects.c
+++ b/builtin/count-objects.c
@@ -11,6 +11,9 @@
static unsigned long garbage;
static off_t size_garbage;
+static int verbose;
+static unsigned long loose, packed, packed_loose;
+static off_t loose_size;
static void real_report_garbage(const char *desc, const char *path)
{
@@ -21,61 +24,31 @@ static void real_report_garbage(const char *desc, const char *path)
garbage++;
}
-static void count_objects(DIR *d, char *path, int len, int verbose,
- unsigned long *loose,
- off_t *loose_size,
- unsigned long *packed_loose)
+static void loose_garbage(const char *path)
{
- struct dirent *ent;
- while ((ent = readdir(d)) != NULL) {
- char hex[41];
- unsigned char sha1[20];
- const char *cp;
- int bad = 0;
+ if (verbose)
+ report_garbage("garbage found", path);
+}
- if (is_dot_or_dotdot(ent->d_name))
- continue;
- for (cp = ent->d_name; *cp; cp++) {
- int ch = *cp;
- if (('0' <= ch && ch <= '9') ||
- ('a' <= ch && ch <= 'f'))
- continue;
- bad = 1;
- break;
- }
- if (cp - ent->d_name != 38)
- bad = 1;
- else {
- struct stat st;
- memcpy(path + len + 3, ent->d_name, 38);
- path[len + 2] = '/';
- path[len + 41] = 0;
- if (lstat(path, &st) || !S_ISREG(st.st_mode))
- bad = 1;
- else
- (*loose_size) += on_disk_bytes(st);
- }
- if (bad) {
- if (verbose) {
- struct strbuf sb = STRBUF_INIT;
- strbuf_addf(&sb, "%.*s/%s",
- len + 2, path, ent->d_name);
- report_garbage("garbage found", sb.buf);
- strbuf_release(&sb);
- }
- continue;
- }
- (*loose)++;
- if (!verbose)
- continue;
- memcpy(hex, path+len, 2);
- memcpy(hex+2, ent->d_name, 38);
- hex[40] = 0;
- if (get_sha1_hex(hex, sha1))
- die("internal error");
- if (has_sha1_pack(sha1))
- (*packed_loose)++;
+static int count_loose(const unsigned char *sha1, const char *path, void *data)
+{
+ struct stat st;
+
+ if (lstat(path, &st) || !S_ISREG(st.st_mode))
+ loose_garbage(path);
+ else {
+ loose_size += on_disk_bytes(st);
+ loose++;
+ if (verbose && has_sha1_pack(sha1))
+ packed_loose++;
}
+ return 0;
+}
+
+static int count_cruft(const char *basename, const char *path, void *data)
+{
+ loose_garbage(path);
+ return 0;
}
static char const * const count_objects_usage[] = {
@@ -85,12 +58,7 @@ static char const * const count_objects_usage[] = {
int cmd_count_objects(int argc, const char **argv, const char *prefix)
{
- int i, verbose = 0, human_readable = 0;
- const char *objdir = get_object_directory();
- int len = strlen(objdir);
- char *path = xmalloc(len + 50);
- unsigned long loose = 0, packed = 0, packed_loose = 0;
- off_t loose_size = 0;
+ int human_readable = 0;
struct option opts[] = {
OPT__VERBOSE(&verbose, N_("be verbose")),
OPT_BOOL('H', "human-readable", &human_readable,
@@ -104,19 +72,10 @@ int cmd_count_objects(int argc, const char **argv, const char *prefix)
usage_with_options(count_objects_usage, opts);
if (verbose)
report_garbage = real_report_garbage;
- memcpy(path, objdir, len);
- if (len && objdir[len-1] != '/')
- path[len++] = '/';
- for (i = 0; i < 256; i++) {
- DIR *d;
- sprintf(path + len, "%02x", i);
- d = opendir(path);
- if (!d)
- continue;
- count_objects(d, path, len, verbose,
- &loose, &loose_size, &packed_loose);
- closedir(d);
- }
+
+ for_each_loose_file_in_objdir(get_object_directory(),
+ count_loose, count_cruft, NULL, NULL);
+
if (verbose) {
struct packed_git *p;
unsigned long num_pack = 0;
--
2.1.1.566.gdb1f904
next prev parent reply other threads:[~2014-10-03 20:31 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-03 20:20 [PATCH 0/16] make prune mtime-checking more careful Jeff King
2014-10-03 20:21 ` [PATCH 01/16] foreach_alt_odb: propagate return value from callback Jeff King
2014-10-03 22:55 ` René Scharfe
2014-10-04 0:31 ` Jeff King
2014-10-03 20:22 ` [PATCH 02/16] isxdigit: cast input to unsigned char Jeff King
2014-10-03 20:22 ` [PATCH 03/16] object_array: factor out slopbuf-freeing logic Jeff King
2014-10-07 11:25 ` Michael Haggerty
2014-10-08 7:36 ` Jeff King
2014-10-08 8:40 ` Michael Haggerty
2014-10-08 8:55 ` Jeff King
2014-10-03 20:22 ` [PATCH 04/16] object_array: add a "clear" function Jeff King
2014-10-03 20:23 ` [PATCH 05/16] clean up name allocation in prepare_revision_walk Jeff King
2014-10-03 20:24 ` [PATCH 06/16] reachable: clear pending array after walking it Jeff King
2014-10-03 20:25 ` [PATCH 07/16] t5304: use test_path_is_* instead of "test -f" Jeff King
2014-10-03 22:12 ` Junio C Hamano
2014-10-03 20:27 ` [PATCH 08/16] t5304: use helper to report failure of "test foo = bar" Jeff King
2014-10-03 22:17 ` Junio C Hamano
2014-10-04 0:13 ` Jeff King
2014-10-07 13:21 ` Michael Haggerty
2014-10-07 17:29 ` Junio C Hamano
2014-10-07 20:18 ` Jeff King
2014-10-07 20:35 ` Junio C Hamano
2014-10-07 21:29 ` Jeff King
2014-10-07 21:53 ` Junio C Hamano
2014-10-07 22:17 ` Michael Haggerty
2014-10-08 1:13 ` Jeff King
2014-10-08 16:58 ` Junio C Hamano
2014-10-07 21:16 ` Junio C Hamano
2014-10-03 20:29 ` [PATCH 09/16] prune: factor out loose-object directory traversal Jeff King
2014-10-03 22:19 ` Junio C Hamano
2014-10-04 0:24 ` Jeff King
2014-10-07 14:07 ` Michael Haggerty
2014-10-08 7:33 ` Jeff King
2014-10-03 20:31 ` [PATCH 10/16] count-objects: do not use xsize_t when counting object size Jeff King
2014-10-03 20:31 ` Jeff King [this message]
2014-10-03 20:32 ` [PATCH 12/16] sha1_file: add for_each iterators for loose and packed objects Jeff King
2014-10-05 8:15 ` René Scharfe
2014-10-05 10:47 ` Ramsay Jones
2014-10-03 20:39 ` [PATCH 13/16] prune: keep objects reachable from recent objects Jeff King
2014-10-03 21:47 ` Junio C Hamano
2014-10-04 0:09 ` Jeff King
2014-10-04 0:30 ` Jeff King
2014-10-04 3:04 ` Junio C Hamano
2014-10-07 16:29 ` Michael Haggerty
2014-10-08 7:19 ` Jeff King
2014-10-08 10:37 ` Michael Haggerty
2014-10-03 20:39 ` [PATCH 14/16] pack-objects: refactor unpack-unreachable expiration check Jeff King
2014-10-03 20:40 ` [PATCH 15/16] pack-objects: match prune logic for discarding objects Jeff King
2014-10-03 20:41 ` [PATCH 16/16] write_sha1_file: freshen existing objects Jeff King
2014-10-03 21:29 ` Junio C Hamano
2014-10-04 0:01 ` Jeff King
2014-10-05 9:12 ` René Scharfe
2014-10-03 22:20 ` [PATCH 0/16] make prune mtime-checking more careful Junio C Hamano
2014-10-04 22:22 ` Junio C Hamano
2014-10-05 9:19 ` René Scharfe
2014-10-06 1:42 ` Jeff King
2014-10-08 8:31 ` Jeff King
2014-10-08 17:03 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141003203150.GK16293@peff.net \
--to=peff@peff.net \
--cc=git@vger.kernel.org \
--cc=mhagger@alum.mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.