All of lore.kernel.org
 help / color / mirror / Atom feed
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes
Date: Mon, 6 Oct 2014 16:12:03 +0200	[thread overview]
Message-ID: <20141006141203.GB15599@piout.net> (raw)
In-Reply-To: <1412248785-28269-1-git-send-email-alexander.stein@systec-electronic.com>

Hi,

On 02/10/2014 at 13:19:45 +0200, Alexander Stein wrote :
> Add the missing CAN devices node including their pin muxing and clocks.
> 
> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
> ---
> Changes in v2:
> * Adjusted pinmux comment
> 
>  arch/arm/boot/dts/at91sam9x5.dtsi | 48 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index e1a5c70..e3f11f2 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -763,6 +795,22 @@
>  					};
>  				};
>  
> +				can0 {
> +					pinctrl_can0_rx_tx: can0_rx_tx {
> +						atmel,pins =
> +							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX, conflicts with DRXD */
> +							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX, conflicts with DTXD */

Last nitpick, could you make that be CANRX0 and CANTX0 ?

> +					};
> +				};
> +
> +				can1 {
> +					pinctrl_can1_rx_tx: can1_rx_tx {
> +						atmel,pins =
> +							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX, conflicts with RXD1 */
> +							 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX, conflicts with TXD1 */

And CANRX1, CANTX1 here so that it is the same as the datasheet.

Then you can add my acked-by.

Thanks !

> +					};
> +				};
> +
>  				pioA: gpio at fffff400 {
>  					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
>  					reg = <0xfffff400 0x200>;
> -- 
> 2.0.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Alexander Stein
	<alexander.stein-93q1YBGzJSMe9JSWTWOYM3xStJ4P+DSV@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Nicolas Ferre
	<nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
	Jean-Christophe Plagniol-Villard
	<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
	Andrew Victor <linux-PelNFVqkFnVyf+4FbqDuWQ@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v2 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes
Date: Mon, 6 Oct 2014 16:12:03 +0200	[thread overview]
Message-ID: <20141006141203.GB15599@piout.net> (raw)
In-Reply-To: <1412248785-28269-1-git-send-email-alexander.stein-93q1YBGzJSMe9JSWTWOYM3xStJ4P+DSV@public.gmane.org>

Hi,

On 02/10/2014 at 13:19:45 +0200, Alexander Stein wrote :
> Add the missing CAN devices node including their pin muxing and clocks.
> 
> Signed-off-by: Alexander Stein <alexander.stein-93q1YBGzJSMe9JSWTWOYM3xStJ4P+DSV@public.gmane.org>
> ---
> Changes in v2:
> * Adjusted pinmux comment
> 
>  arch/arm/boot/dts/at91sam9x5.dtsi | 48 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index e1a5c70..e3f11f2 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -763,6 +795,22 @@
>  					};
>  				};
>  
> +				can0 {
> +					pinctrl_can0_rx_tx: can0_rx_tx {
> +						atmel,pins =
> +							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX, conflicts with DRXD */
> +							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX, conflicts with DTXD */

Last nitpick, could you make that be CANRX0 and CANTX0 ?

> +					};
> +				};
> +
> +				can1 {
> +					pinctrl_can1_rx_tx: can1_rx_tx {
> +						atmel,pins =
> +							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX, conflicts with RXD1 */
> +							 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX, conflicts with TXD1 */

And CANRX1, CANTX1 here so that it is the same as the datasheet.

Then you can add my acked-by.

Thanks !

> +					};
> +				};
> +
>  				pioA: gpio@fffff400 {
>  					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
>  					reg = <0xfffff400 0x200>;
> -- 
> 2.0.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2014-10-06 14:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-02 10:38 [PATCH 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes Alexander Stein
2014-10-02 10:38 ` Alexander Stein
2014-10-02 10:57 ` Alexandre Belloni
2014-10-02 10:57   ` Alexandre Belloni
2014-10-02 11:19   ` [PATCH v2 " Alexander Stein
2014-10-02 11:19     ` Alexander Stein
2014-10-06 14:12     ` Alexandre Belloni [this message]
2014-10-06 14:12       ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141006141203.GB15599@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.