From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/15] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable
Date: Wed, 15 Oct 2014 09:27:47 -0700 [thread overview]
Message-ID: <20141015162747.GH14272@lvm> (raw)
In-Reply-To: <1408626416-11326-8-git-send-email-andre.przywara@arm.com>
On Thu, Aug 21, 2014 at 02:06:48PM +0100, Andre Przywara wrote:
> ICC_SRE_EL1 is a system register allowing msr/mrs accesses to the
> GIC CPU interface for EL1 (guests). Currently we force it to 0, but
> for proper GICv3 support we have to allow guests to use it (depending
> on their selected virtual GIC model).
> So add ICC_SRE_EL1 to the list of saved/restored registers on a
> world switch, but actually disallow a guest to change it by only
> restoring a fixed, once-initialized value.
> This value depends on the GIC model userland has chosen for a guest.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> arch/arm64/kernel/asm-offsets.c | 1 +
> arch/arm64/kvm/vgic-v3-switch.S | 14 +++++++++-----
> include/kvm/arm_vgic.h | 1 +
> virt/kvm/arm/vgic-v3.c | 9 +++++++--
> 4 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
> index 9a9fce0..9d34486 100644
> --- a/arch/arm64/kernel/asm-offsets.c
> +++ b/arch/arm64/kernel/asm-offsets.c
> @@ -140,6 +140,7 @@ int main(void)
> DEFINE(VGIC_V2_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr));
> DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr));
> DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr));
> + DEFINE(VGIC_V3_CPU_SRE, offsetof(struct vgic_cpu, vgic_v3.vgic_sre));
> DEFINE(VGIC_V3_CPU_HCR, offsetof(struct vgic_cpu, vgic_v3.vgic_hcr));
> DEFINE(VGIC_V3_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v3.vgic_vmcr));
> DEFINE(VGIC_V3_CPU_MISR, offsetof(struct vgic_cpu, vgic_v3.vgic_misr));
> diff --git a/arch/arm64/kvm/vgic-v3-switch.S b/arch/arm64/kvm/vgic-v3-switch.S
> index d160469..617a012 100644
> --- a/arch/arm64/kvm/vgic-v3-switch.S
> +++ b/arch/arm64/kvm/vgic-v3-switch.S
> @@ -148,17 +148,18 @@
> * x0: Register pointing to VCPU struct
> */
> .macro restore_vgic_v3_state
> - // Disable SRE_EL1 access. Necessary, otherwise
> - // ICH_VMCR_EL2.VFIQEn becomes one, and FIQ happens...
> - msr_s ICC_SRE_EL1, xzr
> - isb
> -
> // Compute the address of struct vgic_cpu
> add x3, x0, #VCPU_VGIC_CPU
>
> // Restore all interesting registers
> ldr w4, [x3, #VGIC_V3_CPU_HCR]
> ldr w5, [x3, #VGIC_V3_CPU_VMCR]
> + ldr w25, [x3, #VGIC_V3_CPU_SRE]
> +
> + msr_s ICC_SRE_EL1, x25
> +
> + // make sure SRE is valid before writing the other registers
> + isb
>
> msr_s ICH_HCR_EL2, x4
> msr_s ICH_VMCR_EL2, x5
> @@ -244,9 +245,12 @@
> dsb sy
>
> // Prevent the guest from touching the GIC system registers
> + // if SRE isn't enabled for GICv3 emulation
> + cbnz x25, 1f
> mrs_s x5, ICC_SRE_EL2
> and x5, x5, #~ICC_SRE_EL2_ENABLE
> msr_s ICC_SRE_EL2, x5
> +1:
> .endm
>
> ENTRY(__save_vgic_v3_state)
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 7e7c99e..8aa8482 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -199,6 +199,7 @@ struct vgic_v3_cpu_if {
> #ifdef CONFIG_ARM_GIC_V3
> u32 vgic_hcr;
> u32 vgic_vmcr;
> + u32 vgic_sre; /* Restored only, change ignored */
> u32 vgic_misr; /* Saved only */
> u32 vgic_eisr; /* Saved only */
> u32 vgic_elrsr; /* Saved only */
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index 86e8b99..8af8037 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -145,15 +145,20 @@ static void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
>
> static void vgic_v3_enable(struct kvm_vcpu *vcpu)
> {
> + struct vgic_v3_cpu_if *vgic_v3;
> +
> + vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3;
> /*
> * By forcing VMCR to zero, the GIC will restore the binary
> * points to their reset values. Anything else resets to zero
> * anyway.
> */
> - vcpu->arch.vgic_cpu.vgic_v3.vgic_vmcr = 0;
> + vgic_v3->vgic_vmcr = 0;
> +
> + vgic_v3->vgic_sre = 0;
why the tab ^^^ ?
>
> /* Get the show on the road... */
> - vcpu->arch.vgic_cpu.vgic_v3.vgic_hcr = ICH_HCR_EN;
> + vgic_v3->vgic_hcr = ICH_HCR_EN;
> }
>
> static const struct vgic_ops vgic_v3_ops = {
> --
> 1.7.9.5
>
Besides the nit:
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
WARNING: multiple messages have this Message-ID (diff)
From: Christoffer Dall <christoffer.dall@linaro.org>
To: Andre Przywara <andre.przywara@arm.com>
Cc: kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
marc.zyngier@arm.com
Subject: Re: [PATCH v2 07/15] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable
Date: Wed, 15 Oct 2014 09:27:47 -0700 [thread overview]
Message-ID: <20141015162747.GH14272@lvm> (raw)
In-Reply-To: <1408626416-11326-8-git-send-email-andre.przywara@arm.com>
On Thu, Aug 21, 2014 at 02:06:48PM +0100, Andre Przywara wrote:
> ICC_SRE_EL1 is a system register allowing msr/mrs accesses to the
> GIC CPU interface for EL1 (guests). Currently we force it to 0, but
> for proper GICv3 support we have to allow guests to use it (depending
> on their selected virtual GIC model).
> So add ICC_SRE_EL1 to the list of saved/restored registers on a
> world switch, but actually disallow a guest to change it by only
> restoring a fixed, once-initialized value.
> This value depends on the GIC model userland has chosen for a guest.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> arch/arm64/kernel/asm-offsets.c | 1 +
> arch/arm64/kvm/vgic-v3-switch.S | 14 +++++++++-----
> include/kvm/arm_vgic.h | 1 +
> virt/kvm/arm/vgic-v3.c | 9 +++++++--
> 4 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
> index 9a9fce0..9d34486 100644
> --- a/arch/arm64/kernel/asm-offsets.c
> +++ b/arch/arm64/kernel/asm-offsets.c
> @@ -140,6 +140,7 @@ int main(void)
> DEFINE(VGIC_V2_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr));
> DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr));
> DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr));
> + DEFINE(VGIC_V3_CPU_SRE, offsetof(struct vgic_cpu, vgic_v3.vgic_sre));
> DEFINE(VGIC_V3_CPU_HCR, offsetof(struct vgic_cpu, vgic_v3.vgic_hcr));
> DEFINE(VGIC_V3_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v3.vgic_vmcr));
> DEFINE(VGIC_V3_CPU_MISR, offsetof(struct vgic_cpu, vgic_v3.vgic_misr));
> diff --git a/arch/arm64/kvm/vgic-v3-switch.S b/arch/arm64/kvm/vgic-v3-switch.S
> index d160469..617a012 100644
> --- a/arch/arm64/kvm/vgic-v3-switch.S
> +++ b/arch/arm64/kvm/vgic-v3-switch.S
> @@ -148,17 +148,18 @@
> * x0: Register pointing to VCPU struct
> */
> .macro restore_vgic_v3_state
> - // Disable SRE_EL1 access. Necessary, otherwise
> - // ICH_VMCR_EL2.VFIQEn becomes one, and FIQ happens...
> - msr_s ICC_SRE_EL1, xzr
> - isb
> -
> // Compute the address of struct vgic_cpu
> add x3, x0, #VCPU_VGIC_CPU
>
> // Restore all interesting registers
> ldr w4, [x3, #VGIC_V3_CPU_HCR]
> ldr w5, [x3, #VGIC_V3_CPU_VMCR]
> + ldr w25, [x3, #VGIC_V3_CPU_SRE]
> +
> + msr_s ICC_SRE_EL1, x25
> +
> + // make sure SRE is valid before writing the other registers
> + isb
>
> msr_s ICH_HCR_EL2, x4
> msr_s ICH_VMCR_EL2, x5
> @@ -244,9 +245,12 @@
> dsb sy
>
> // Prevent the guest from touching the GIC system registers
> + // if SRE isn't enabled for GICv3 emulation
> + cbnz x25, 1f
> mrs_s x5, ICC_SRE_EL2
> and x5, x5, #~ICC_SRE_EL2_ENABLE
> msr_s ICC_SRE_EL2, x5
> +1:
> .endm
>
> ENTRY(__save_vgic_v3_state)
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 7e7c99e..8aa8482 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -199,6 +199,7 @@ struct vgic_v3_cpu_if {
> #ifdef CONFIG_ARM_GIC_V3
> u32 vgic_hcr;
> u32 vgic_vmcr;
> + u32 vgic_sre; /* Restored only, change ignored */
> u32 vgic_misr; /* Saved only */
> u32 vgic_eisr; /* Saved only */
> u32 vgic_elrsr; /* Saved only */
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index 86e8b99..8af8037 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -145,15 +145,20 @@ static void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
>
> static void vgic_v3_enable(struct kvm_vcpu *vcpu)
> {
> + struct vgic_v3_cpu_if *vgic_v3;
> +
> + vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3;
> /*
> * By forcing VMCR to zero, the GIC will restore the binary
> * points to their reset values. Anything else resets to zero
> * anyway.
> */
> - vcpu->arch.vgic_cpu.vgic_v3.vgic_vmcr = 0;
> + vgic_v3->vgic_vmcr = 0;
> +
> + vgic_v3->vgic_sre = 0;
why the tab ^^^ ?
>
> /* Get the show on the road... */
> - vcpu->arch.vgic_cpu.vgic_v3.vgic_hcr = ICH_HCR_EN;
> + vgic_v3->vgic_hcr = ICH_HCR_EN;
> }
>
> static const struct vgic_ops vgic_v3_ops = {
> --
> 1.7.9.5
>
Besides the nit:
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
next prev parent reply other threads:[~2014-10-15 16:27 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-21 13:06 [PATCH v2 00/15] KVM GICv3 emulation Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 01/15] arm/arm64: KVM: rework MPIDR assignment and add accessors Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-10-15 16:25 ` Christoffer Dall
2014-10-15 16:25 ` Christoffer Dall
2014-10-31 14:06 ` Andre Przywara
2014-10-31 14:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 02/15] arm/arm64: KVM: pass down user space provided GIC type into vGIC code Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-10-15 16:25 ` Christoffer Dall
2014-10-15 16:25 ` Christoffer Dall
2014-08-21 13:06 ` [PATCH v2 03/15] arm/arm64: KVM: refactor vgic_handle_mmio() function Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-09-04 7:52 ` wanghaibin
2014-10-15 16:25 ` Christoffer Dall
2014-10-15 16:25 ` Christoffer Dall
2014-10-31 13:42 ` Andre Przywara
2014-10-31 13:42 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 04/15] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-10-15 16:26 ` Christoffer Dall
2014-10-15 16:26 ` Christoffer Dall
2014-10-31 13:49 ` Andre Przywara
2014-10-31 13:49 ` Andre Przywara
2014-11-03 9:54 ` Christoffer Dall
2014-11-03 9:54 ` Christoffer Dall
2014-08-21 13:06 ` [PATCH v2 05/15] arm/arm64: KVM: introduce per-VM ops Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-10-15 16:27 ` Christoffer Dall
2014-10-15 16:27 ` Christoffer Dall
2014-10-31 13:59 ` Andre Przywara
2014-10-31 13:59 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 06/15] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-10-15 16:27 ` Christoffer Dall
2014-10-15 16:27 ` Christoffer Dall
2014-10-31 14:10 ` Andre Przywara
2014-10-31 14:10 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 07/15] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-10-15 16:27 ` Christoffer Dall [this message]
2014-10-15 16:27 ` Christoffer Dall
2014-08-21 13:06 ` [PATCH v2 08/15] arm/arm64: KVM: refactor MMIO accessors Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 09/15] arm/arm64: KVM: refactor/wrap vgic_set/get_attr() Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 10/15] arm/arm64: KVM: split GICv2 specific emulation code from vgic.c Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 11/15] arm/arm64: KVM: add opaque private pointer to MMIO accessors Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 12/15] arm/arm64: KVM: add virtual GICv3 distributor emulation Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-09-05 3:28 ` wanghaibin
2014-09-05 3:28 ` wanghaibin
2014-09-05 8:13 ` Andre Przywara
2014-09-05 8:13 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 13/15] arm/arm64: KVM: add SGI system register trapping Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 14/15] arm/arm64: KVM: enable kernel side of GICv3 emulation Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 15/15] arm/arm64: KVM: allow userland to request a virtual GICv3 Andre Przywara
2014-08-21 13:06 ` Andre Przywara
2014-09-20 1:15 ` wanghaibin
2014-09-20 1:15 ` wanghaibin
2014-10-08 4:08 ` [PATCH v2 00/15] KVM GICv3 emulation wanghaibin
2014-10-08 4:08 ` wanghaibin
2014-10-08 8:41 ` Andre Przywara
2014-10-08 8:41 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141015162747.GH14272@lvm \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.