From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Ezaul Zillmer <ezaulzillmer@gmail.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
pawel.moll@arm.com, ijc+devicetree@hellion.org.uk,
linux-kernel@vger.kernel.org, yassinjaffer@gmail.com,
linux-sunxi@googlegroups.com, robh+dt@kernel.org,
linux-mtd@lists.infradead.org, galak@codeaurora.org,
maxime.ripard@free-electrons.com, computersforpeace@gmail.com,
dwmw2@infradead.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc
Date: Tue, 21 Oct 2014 15:58:41 +0200 [thread overview]
Message-ID: <20141021155841.180861d0@bbrezillon> (raw)
In-Reply-To: <62d54110-9c7f-4342-9201-a1ae23194620@googlegroups.com>
On Tue, 21 Oct 2014 06:13:16 -0700 (PDT)
Ezaul Zillmer <ezaulzillmer@gmail.com> wrote:
> Hello everyone
>
> Boris Brezillon
>
> downloaded sunxi-nand-v6 now compiled for Cubieboard2
> https://github.com/bbrezillon/linux-sunxi.git sunxi b-nand-v6
>
> u-boot
> git clone https://github.com/jwrdegoede/u-boot-b sunxi.git sunxi-wip
>
>
> [1.143903] nand: Could not find valid JEDEC parameter page; aborting
> [1.150369] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd7
> [1.156766] nand: Samsung NAND 4GiB 3.3V 8-bit
> [1.161214] nand: 4096MiB, MLC, page size: 8192, OOB size: 640
> [1.167167] sunxi_nand 1c03000.nand: ECC init failed: -22
> [1.172588] sunxi_nand 1c03000.nand: failed to init nand chips
> [1.178502] sunxi_nand: probe of 1c03000.nand failed with error -22
>
> need some more data?
>
Can you try to apply this patch [1] ?
[1]http://code.bulix.org/26bi35-87234
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: boris.brezillon@free-electrons.com (Boris Brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc
Date: Tue, 21 Oct 2014 15:58:41 +0200 [thread overview]
Message-ID: <20141021155841.180861d0@bbrezillon> (raw)
In-Reply-To: <62d54110-9c7f-4342-9201-a1ae23194620@googlegroups.com>
On Tue, 21 Oct 2014 06:13:16 -0700 (PDT)
Ezaul Zillmer <ezaulzillmer@gmail.com> wrote:
> Hello everyone
>
> Boris Brezillon
>
> downloaded sunxi-nand-v6 now compiled for Cubieboard2
> https://github.com/bbrezillon/linux-sunxi.git sunxi b-nand-v6
>
> u-boot
> git clone https://github.com/jwrdegoede/u-boot-b sunxi.git sunxi-wip
>
>
> [1.143903] nand: Could not find valid JEDEC parameter page; aborting
> [1.150369] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd7
> [1.156766] nand: Samsung NAND 4GiB 3.3V 8-bit
> [1.161214] nand: 4096MiB, MLC, page size: 8192, OOB size: 640
> [1.167167] sunxi_nand 1c03000.nand: ECC init failed: -22
> [1.172588] sunxi_nand 1c03000.nand: failed to init nand chips
> [1.178502] sunxi_nand: probe of 1c03000.nand failed with error -22
>
> need some more data?
>
Can you try to apply this patch [1] ?
[1]http://code.bulix.org/26bi35-87234
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Ezaul Zillmer <ezaulzillmer-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
yassinjaffer-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Subject: Re: [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc
Date: Tue, 21 Oct 2014 15:58:41 +0200 [thread overview]
Message-ID: <20141021155841.180861d0@bbrezillon> (raw)
In-Reply-To: <62d54110-9c7f-4342-9201-a1ae23194620-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
On Tue, 21 Oct 2014 06:13:16 -0700 (PDT)
Ezaul Zillmer <ezaulzillmer-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Hello everyone
>
> Boris Brezillon
>
> downloaded sunxi-nand-v6 now compiled for Cubieboard2
> https://github.com/bbrezillon/linux-sunxi.git sunxi b-nand-v6
>
> u-boot
> git clone https://github.com/jwrdegoede/u-boot-b sunxi.git sunxi-wip
>
>
> [1.143903] nand: Could not find valid JEDEC parameter page; aborting
> [1.150369] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd7
> [1.156766] nand: Samsung NAND 4GiB 3.3V 8-bit
> [1.161214] nand: 4096MiB, MLC, page size: 8192, OOB size: 640
> [1.167167] sunxi_nand 1c03000.nand: ECC init failed: -22
> [1.172588] sunxi_nand 1c03000.nand: failed to init nand chips
> [1.178502] sunxi_nand: probe of 1c03000.nand failed with error -22
>
> need some more data?
>
Can you try to apply this patch [1] ?
[1]http://code.bulix.org/26bi35-87234
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Ezaul Zillmer <ezaulzillmer@gmail.com>
Cc: linux-sunxi@googlegroups.com, computersforpeace@gmail.com,
dwmw2@infradead.org, linux-mtd@lists.infradead.org,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, yassinjaffer@gmail.com,
maxime.ripard@free-electrons.com
Subject: Re: [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc
Date: Tue, 21 Oct 2014 15:58:41 +0200 [thread overview]
Message-ID: <20141021155841.180861d0@bbrezillon> (raw)
In-Reply-To: <62d54110-9c7f-4342-9201-a1ae23194620@googlegroups.com>
On Tue, 21 Oct 2014 06:13:16 -0700 (PDT)
Ezaul Zillmer <ezaulzillmer@gmail.com> wrote:
> Hello everyone
>
> Boris Brezillon
>
> downloaded sunxi-nand-v6 now compiled for Cubieboard2
> https://github.com/bbrezillon/linux-sunxi.git sunxi b-nand-v6
>
> u-boot
> git clone https://github.com/jwrdegoede/u-boot-b sunxi.git sunxi-wip
>
>
> [1.143903] nand: Could not find valid JEDEC parameter page; aborting
> [1.150369] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd7
> [1.156766] nand: Samsung NAND 4GiB 3.3V 8-bit
> [1.161214] nand: 4096MiB, MLC, page size: 8192, OOB size: 640
> [1.167167] sunxi_nand 1c03000.nand: ECC init failed: -22
> [1.172588] sunxi_nand 1c03000.nand: failed to init nand chips
> [1.178502] sunxi_nand: probe of 1c03000.nand failed with error -22
>
> need some more data?
>
Can you try to apply this patch [1] ?
[1]http://code.bulix.org/26bi35-87234
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2014-10-21 13:58 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-20 11:45 [PATCH v6 0/2] mtd: nand: add sunxi NAND flash controller support Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 11:45 ` [PATCH v6 1/2] " Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 12:01 ` Varka Bhadram
2014-10-20 12:01 ` Varka Bhadram
2014-10-20 12:01 ` Varka Bhadram
2014-10-20 12:01 ` Varka Bhadram
2014-10-20 12:29 ` Boris Brezillon
2014-10-20 12:29 ` Boris Brezillon
2014-10-20 12:29 ` Boris Brezillon
2014-10-20 12:29 ` Boris Brezillon
2014-10-21 2:28 ` Brian Norris
2014-10-21 2:28 ` Brian Norris
2014-10-21 2:28 ` Brian Norris
2014-10-21 2:28 ` Brian Norris
2014-10-20 11:45 ` [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-20 11:45 ` Boris Brezillon
2014-10-21 2:41 ` Brian Norris
2014-10-21 2:41 ` Brian Norris
2014-10-21 2:41 ` Brian Norris
2014-10-21 2:41 ` Brian Norris
2014-10-21 12:53 ` Boris Brezillon
2014-10-21 12:53 ` Boris Brezillon
2014-10-21 12:53 ` Boris Brezillon
2014-10-21 12:53 ` Boris Brezillon
2014-10-21 13:13 ` Ezaul Zillmer
[not found] ` <62d54110-9c7f-4342-9201-a1ae23194620-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
2014-10-21 13:15 ` Ezaul Zillmer
2014-10-21 13:48 ` Boris Brezillon
2014-10-21 13:48 ` Boris Brezillon
2014-10-21 13:48 ` Boris Brezillon
2014-10-21 13:58 ` Boris Brezillon [this message]
2014-10-21 13:58 ` Boris Brezillon
2014-10-21 13:58 ` Boris Brezillon
2014-10-21 13:58 ` Boris Brezillon
2014-10-21 15:03 ` Ezaul Zillmer
[not found] ` <89bb5f8e-2fb0-4012-a8b2-fdd618da8f11-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
2014-10-21 15:46 ` Ezaul Zillmer
2014-10-21 16:01 ` Boris Brezillon
2014-10-21 16:01 ` Boris Brezillon
2014-10-21 16:01 ` Boris Brezillon
2014-10-21 16:01 ` Boris Brezillon
2014-10-22 11:17 ` Ezaul Zillmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141021155841.180861d0@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezaulzillmer@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=yassinjaffer@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.