From: Pavel Machek <pavel@ucw.cz>
To: Tony Lindgren <tony@atomide.com>
Cc: "Pali Rohár" <pali.rohar@gmail.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Felipe Balbi" <balbi@ti.com>,
sre@debian.org, sre@ring0.de,
"kernel list" <linux-kernel@vger.kernel.org>,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
"Tomi Valkeinen" <tomi.valkeinen@ti.com>
Subject: Re: Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)
Date: Fri, 31 Oct 2014 21:03:18 +0100 [thread overview]
Message-ID: <20141031200318.GA6949@amd> (raw)
In-Reply-To: <20141029140943.GX2542@atomide.com>
Hi!
I tried enabling audio. It works ...sometimes... after fixing
kconfig. But I'm getting WARN_ON, about 50% of time. Ideas welcome.
Pavel
[ 2.398681] rx51-audio n900-audio: GPIO lookup for consumer speaker-amplifier
[ 2.398681] rx51-audio n900-audio: using device tree for GPIO lookup
[ 2.398742] of_get_named_gpiod_flags: parsed 'speaker-amplifier-gpios' property of node '/n900-audio[0]' - status (0)
[ 2.404663] rx51-audio n900-audio: Failed to add TPA6130A2 controls
[ 2.411010] rx51-audio n900-audio: ASoC: failed to init TLV320AIC34: -19
[ 2.416992] rx51-audio n900-audio: ASoC: failed to instantiate card -19
[ 2.423370] gpiod_unexport: invalid GPIO
[ 2.429077] ------------[ cut here ]------------
[ 2.434661] WARNING: CPU: 0 PID: 6 at drivers/gpio/gpiolib.c:864 gpiod_free+0x2c/0x44()
[ 2.440399] Modules linked in:
[ 2.445892] CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.18.0-rc1-omap3-67808-gc4dc985-dirty #554
[ 2.458648] Workqueue: deferwq deferred_probe_work_func
[ 2.464080] Backtrace:
[ 2.469573] [<c00116ec>] (dump_backtrace) from [<c0011888>] (show_stack+0x18/0x1c)
[ 2.475189] r6:00000360 r5:00000009 r4:00000000 r3:00000000
[ 2.480895] [<c0011870>] (show_stack) from [<c0569fd4>] (dump_stack+0x20/0x28)
[ 2.486663] [<c0569fb4>] (dump_stack) from [<c0039434>] (warn_slowpath_common+0x6c/0x8c)
[ 2.492584] [<c00393c8>] (warn_slowpath_common) from [<c0039478>] (warn_slowpath_null+0x24/0x2c)
[ 2.498626] r8:c079e394 r7:00000000 r6:00000001 r5:00000001 r4:00000000
[ 2.504821] [<c0039454>] (warn_slowpath_null) from [<c02336cc>] (gpiod_free+0x2c/0x44)
[ 2.511199] [<c02336a0>] (gpiod_free) from [<c02336f4>] (gpiod_put+0x10/0x14)
[ 2.517608] r4:c079e330 r3:ffffffe0
[ 2.523895] [<c02336e4>] (gpiod_put) from [<c040f808>] (snd_soc_jack_free_gpios+0x4c/0x60)
[ 2.530517] [<c040f7bc>] (snd_soc_jack_free_gpios) from [<c041b140>] (rx51_card_remove+0x1c/0x2c)
[ 2.537384] r7:00000001 r6:cfb76d80 r5:cf991010 r4:ffffffed
[ 2.544158] [<c041b124>] (rx51_card_remove) from [<c04098dc>] (snd_soc_register_card+0xabc/0x13b4)
[ 2.557525] [<c0408e20>] (snd_soc_register_card) from [<c0415f30>] (devm_snd_soc_register_card+0x34/0x70)
[ 2.571624] r10:00000000 r9:00000000 r8:0000002c r7:cf96d410 r6:c079e2d8 r5:cf3f2250
[ 2.579193] r4:c079e394
[ 2.586517] [<c0415efc>] (devm_snd_soc_register_card) from [<c041b2e0>] (rx51_soc_probe+0x190/0x2e8)
[ 2.601348] r7:cf96d410 r6:c079e2d8 r5:cf3f2050 r4:00000000
[ 2.608947] [<c041b150>] (rx51_soc_probe) from [<c02a3770>] (platform_drv_probe+0x50/0xac)
[ 2.616516] r7:c079e2ec r6:fffffdfb r5:cf96d410 r4:ffffffed
[ 2.624176] [<c02a3720>] (platform_drv_probe) from [<c02a2010>] (driver_probe_device+0x10c/0x22c)
[ 2.632049] r7:c079e2ec r6:00000000 r5:cf96d410 r4:c08b8ab0
[ 2.639984] [<c02a1f04>] (driver_probe_device) from [<c02a2210>] (__device_attach+0x48/0x4c)
[ 2.647918] r8:cf025700 r7:cf86c000 r6:c02a21c8 r5:cf96d410 r4:c079e2ec r3:c02a3cb0
[ 2.656005] [<c02a21c8>] (__device_attach) from [<c02a05e8>] (bus_for_each_drv+0x4c/0x94)
[ 2.664093] r5:cf96d410 r4:00000000
[ 2.672058] [<c02a059c>] (bus_for_each_drv) from [<c02a1ec0>] (device_attach+0x78/0x90)
[ 2.680114] r6:c0787fa0 r5:cf96d444 r4:cf96d410
[ 2.688110] [<c02a1e48>] (device_attach) from [<c02a1590>] (bus_probe_device+0x8c/0xb0)
[ 2.696166] r6:c0787fa0 r5:cf96d410 r4:cf96d410 r3:cf8410c0
[ 2.704284] [<c02a1504>] (bus_probe_device) from [<c02a1984>] (deferred_probe_work_func+0x64/0x90)
[ 2.720275] r6:c0787f44 r5:c0787f50 r4:cf96d410 r3:c07885c4
[ 2.728363] [<c02a1920>] (deferred_probe_work_func) from [<c004c0f8>] (process_one_work+0x120/0x338)
[ 2.744140] r6:cf803e00 r5:c0787f68 r4:cf838280 r3:c02a1920
[ 2.752105] [<c004bfd8>] (process_one_work) from [<c004c4a4>] (worker_thread+0x158/0x518)
[ 2.760070] r10:00000088 r9:cf838280 r8:cf838298 r7:00000001 r6:cf803e10 r5:cf86c000
[ 2.768035] r4:cf803e00
[ 2.775695] [<c004c34c>] (worker_thread) from [<c0050d0c>] (kthread+0xc8/0xe4)
[ 2.783477] r10:00000000 r9:00000000 r8:00000000 r7:c004c34c r6:cf838280 r5:cf839640
[ 2.791320] r4:00000000
[ 2.798889] [<c0050c44>] (kthread) from [<c000ebd8>] (ret_from_fork+0x14/0x3c)
[ 2.806518] r7:00000000 r6:00000000 r5:c0050c44 r4:cf839640
[ 2.814178] ---[ end trace 7377fd58b39bf1ee ]---
[ 2.821899] rx51-audio n900-audio: snd_soc_register_card failed (-19)
[ 2.831146] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_lens_cover[0]' - status (0)
[ 2.831237] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_focus[0]' - status (0)
[ 2.831329] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_capture[0]' - status (0)
[ 2.831390] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/lock_button[0]' - status (0)
[ 2.831451] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/keypad_slide[0]' - status (0)
[ 2.831512] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/proximity_sensor[0]' - status (0)
[ 2.832733] input: gpio_keys as /devices/gpio_keys/input/input5
[ 2.857971] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2014-10-31 19:54:47 UTC (1414785287)
[ 3.777465] musb-hdrc.0.auto: registering UDC driver [g_ether]
[ 3.777679] using random self ethernet address
[ 3.785003] using random host ethernet address
[ 3.791900] g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/c0793078
[ 3.791961] g_ether gadget: adding 'cdc_ethernet'/cf3ef300 to config 'CDC Ethernet (ECM)'/c0793078
[ 3.793579] usb0: HOST MAC 26:c1:fc:d6:eb:34
[ 3.800994] usb0: MAC be:19:8e:16:b0:da
[ 3.807708] g_ether gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
commit 85a6aea58dbfe1068098d4160c17d3dad530ea50
Author: Pavel <pavel@ucw.cz>
Date: Thu Oct 30 23:35:31 2014 +0100
Nokia N900 audio driver should be selectable even without RX51 support
enabled (as is the case with RX51 booting using device tree).
Signed-off-by: Pavel Machek <pavel@ucw.cz>
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index d44463a..0d7b707 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -26,7 +26,7 @@ config SND_OMAP_SOC_N810
config SND_OMAP_SOC_RX51
tristate "SoC Audio support for Nokia RX-51"
- depends on SND_OMAP_SOC && ARM && (MACH_NOKIA_RX51 || COMPILE_TEST) && I2C
+ depends on SND_OMAP_SOC && ARM && I2C
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC3X
select SND_SOC_TPA6130A2
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)
Date: Fri, 31 Oct 2014 21:03:18 +0100 [thread overview]
Message-ID: <20141031200318.GA6949@amd> (raw)
In-Reply-To: <20141029140943.GX2542@atomide.com>
Hi!
I tried enabling audio. It works ...sometimes... after fixing
kconfig. But I'm getting WARN_ON, about 50% of time. Ideas welcome.
Pavel
[ 2.398681] rx51-audio n900-audio: GPIO lookup for consumer speaker-amplifier
[ 2.398681] rx51-audio n900-audio: using device tree for GPIO lookup
[ 2.398742] of_get_named_gpiod_flags: parsed 'speaker-amplifier-gpios' property of node '/n900-audio[0]' - status (0)
[ 2.404663] rx51-audio n900-audio: Failed to add TPA6130A2 controls
[ 2.411010] rx51-audio n900-audio: ASoC: failed to init TLV320AIC34: -19
[ 2.416992] rx51-audio n900-audio: ASoC: failed to instantiate card -19
[ 2.423370] gpiod_unexport: invalid GPIO
[ 2.429077] ------------[ cut here ]------------
[ 2.434661] WARNING: CPU: 0 PID: 6 at drivers/gpio/gpiolib.c:864 gpiod_free+0x2c/0x44()
[ 2.440399] Modules linked in:
[ 2.445892] CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.18.0-rc1-omap3-67808-gc4dc985-dirty #554
[ 2.458648] Workqueue: deferwq deferred_probe_work_func
[ 2.464080] Backtrace:
[ 2.469573] [<c00116ec>] (dump_backtrace) from [<c0011888>] (show_stack+0x18/0x1c)
[ 2.475189] r6:00000360 r5:00000009 r4:00000000 r3:00000000
[ 2.480895] [<c0011870>] (show_stack) from [<c0569fd4>] (dump_stack+0x20/0x28)
[ 2.486663] [<c0569fb4>] (dump_stack) from [<c0039434>] (warn_slowpath_common+0x6c/0x8c)
[ 2.492584] [<c00393c8>] (warn_slowpath_common) from [<c0039478>] (warn_slowpath_null+0x24/0x2c)
[ 2.498626] r8:c079e394 r7:00000000 r6:00000001 r5:00000001 r4:00000000
[ 2.504821] [<c0039454>] (warn_slowpath_null) from [<c02336cc>] (gpiod_free+0x2c/0x44)
[ 2.511199] [<c02336a0>] (gpiod_free) from [<c02336f4>] (gpiod_put+0x10/0x14)
[ 2.517608] r4:c079e330 r3:ffffffe0
[ 2.523895] [<c02336e4>] (gpiod_put) from [<c040f808>] (snd_soc_jack_free_gpios+0x4c/0x60)
[ 2.530517] [<c040f7bc>] (snd_soc_jack_free_gpios) from [<c041b140>] (rx51_card_remove+0x1c/0x2c)
[ 2.537384] r7:00000001 r6:cfb76d80 r5:cf991010 r4:ffffffed
[ 2.544158] [<c041b124>] (rx51_card_remove) from [<c04098dc>] (snd_soc_register_card+0xabc/0x13b4)
[ 2.557525] [<c0408e20>] (snd_soc_register_card) from [<c0415f30>] (devm_snd_soc_register_card+0x34/0x70)
[ 2.571624] r10:00000000 r9:00000000 r8:0000002c r7:cf96d410 r6:c079e2d8 r5:cf3f2250
[ 2.579193] r4:c079e394
[ 2.586517] [<c0415efc>] (devm_snd_soc_register_card) from [<c041b2e0>] (rx51_soc_probe+0x190/0x2e8)
[ 2.601348] r7:cf96d410 r6:c079e2d8 r5:cf3f2050 r4:00000000
[ 2.608947] [<c041b150>] (rx51_soc_probe) from [<c02a3770>] (platform_drv_probe+0x50/0xac)
[ 2.616516] r7:c079e2ec r6:fffffdfb r5:cf96d410 r4:ffffffed
[ 2.624176] [<c02a3720>] (platform_drv_probe) from [<c02a2010>] (driver_probe_device+0x10c/0x22c)
[ 2.632049] r7:c079e2ec r6:00000000 r5:cf96d410 r4:c08b8ab0
[ 2.639984] [<c02a1f04>] (driver_probe_device) from [<c02a2210>] (__device_attach+0x48/0x4c)
[ 2.647918] r8:cf025700 r7:cf86c000 r6:c02a21c8 r5:cf96d410 r4:c079e2ec r3:c02a3cb0
[ 2.656005] [<c02a21c8>] (__device_attach) from [<c02a05e8>] (bus_for_each_drv+0x4c/0x94)
[ 2.664093] r5:cf96d410 r4:00000000
[ 2.672058] [<c02a059c>] (bus_for_each_drv) from [<c02a1ec0>] (device_attach+0x78/0x90)
[ 2.680114] r6:c0787fa0 r5:cf96d444 r4:cf96d410
[ 2.688110] [<c02a1e48>] (device_attach) from [<c02a1590>] (bus_probe_device+0x8c/0xb0)
[ 2.696166] r6:c0787fa0 r5:cf96d410 r4:cf96d410 r3:cf8410c0
[ 2.704284] [<c02a1504>] (bus_probe_device) from [<c02a1984>] (deferred_probe_work_func+0x64/0x90)
[ 2.720275] r6:c0787f44 r5:c0787f50 r4:cf96d410 r3:c07885c4
[ 2.728363] [<c02a1920>] (deferred_probe_work_func) from [<c004c0f8>] (process_one_work+0x120/0x338)
[ 2.744140] r6:cf803e00 r5:c0787f68 r4:cf838280 r3:c02a1920
[ 2.752105] [<c004bfd8>] (process_one_work) from [<c004c4a4>] (worker_thread+0x158/0x518)
[ 2.760070] r10:00000088 r9:cf838280 r8:cf838298 r7:00000001 r6:cf803e10 r5:cf86c000
[ 2.768035] r4:cf803e00
[ 2.775695] [<c004c34c>] (worker_thread) from [<c0050d0c>] (kthread+0xc8/0xe4)
[ 2.783477] r10:00000000 r9:00000000 r8:00000000 r7:c004c34c r6:cf838280 r5:cf839640
[ 2.791320] r4:00000000
[ 2.798889] [<c0050c44>] (kthread) from [<c000ebd8>] (ret_from_fork+0x14/0x3c)
[ 2.806518] r7:00000000 r6:00000000 r5:c0050c44 r4:cf839640
[ 2.814178] ---[ end trace 7377fd58b39bf1ee ]---
[ 2.821899] rx51-audio n900-audio: snd_soc_register_card failed (-19)
[ 2.831146] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_lens_cover[0]' - status (0)
[ 2.831237] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_focus[0]' - status (0)
[ 2.831329] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_capture[0]' - status (0)
[ 2.831390] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/lock_button[0]' - status (0)
[ 2.831451] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/keypad_slide[0]' - status (0)
[ 2.831512] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/proximity_sensor[0]' - status (0)
[ 2.832733] input: gpio_keys as /devices/gpio_keys/input/input5
[ 2.857971] twl_rtc 48070000.i2c:twl at 48:rtc: setting system clock to 2014-10-31 19:54:47 UTC (1414785287)
[ 3.777465] musb-hdrc.0.auto: registering UDC driver [g_ether]
[ 3.777679] using random self ethernet address
[ 3.785003] using random host ethernet address
[ 3.791900] g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/c0793078
[ 3.791961] g_ether gadget: adding 'cdc_ethernet'/cf3ef300 to config 'CDC Ethernet (ECM)'/c0793078
[ 3.793579] usb0: HOST MAC 26:c1:fc:d6:eb:34
[ 3.800994] usb0: MAC be:19:8e:16:b0:da
[ 3.807708] g_ether gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
commit 85a6aea58dbfe1068098d4160c17d3dad530ea50
Author: Pavel <pavel@ucw.cz>
Date: Thu Oct 30 23:35:31 2014 +0100
Nokia N900 audio driver should be selectable even without RX51 support
enabled (as is the case with RX51 booting using device tree).
Signed-off-by: Pavel Machek <pavel@ucw.cz>
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index d44463a..0d7b707 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -26,7 +26,7 @@ config SND_OMAP_SOC_N810
config SND_OMAP_SOC_RX51
tristate "SoC Audio support for Nokia RX-51"
- depends on SND_OMAP_SOC && ARM && (MACH_NOKIA_RX51 || COMPILE_TEST) && I2C
+ depends on SND_OMAP_SOC && ARM && I2C
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC3X
select SND_SOC_TPA6130A2
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2014-10-31 20:03 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-19 9:01 USB Ethernet gadget on Nokia n900 Pavel Machek
2014-10-19 9:01 ` Pavel Machek
2014-10-19 10:07 ` Pavel Machek
2014-10-19 10:07 ` Pavel Machek
2014-10-19 14:58 ` Pali Rohár
2014-10-19 14:58 ` Pali Rohár
2014-10-19 20:50 ` Pavel Machek
2014-10-19 20:50 ` Pavel Machek
2014-10-19 20:50 ` Pavel Machek
2014-10-19 21:00 ` Pali Rohár
2014-10-19 21:00 ` Pali Rohár
2014-10-19 22:30 ` Pavel Machek
2014-10-19 22:30 ` Pavel Machek
2014-10-20 13:08 ` Pavel Machek
2014-10-20 13:08 ` Pavel Machek
2014-10-20 16:45 ` Tony Lindgren
2014-10-20 16:45 ` Tony Lindgren
2014-10-20 22:03 ` Pavel Machek
2014-10-20 22:03 ` Pavel Machek
2014-10-20 22:29 ` Tony Lindgren
2014-10-20 22:29 ` Tony Lindgren
2014-10-21 21:52 ` Pavel Machek
2014-10-21 21:52 ` Pavel Machek
2014-10-19 15:24 ` Felipe Balbi
2014-10-19 15:24 ` Felipe Balbi
2014-10-19 15:24 ` Felipe Balbi
2014-10-19 19:19 ` Pavel Machek
2014-10-19 19:19 ` Pavel Machek
2014-10-19 19:29 ` Pavel Machek
2014-10-19 19:29 ` Pavel Machek
2014-10-20 21:35 ` Aaro Koskinen
2014-10-20 21:35 ` Aaro Koskinen
2014-10-20 21:37 ` Aaro Koskinen
2014-10-20 21:37 ` Aaro Koskinen
2014-10-20 22:42 ` Pavel Machek
2014-10-20 22:42 ` Pavel Machek
2014-10-26 11:08 ` Pavel Machek
2014-10-26 11:08 ` Pavel Machek
2014-10-26 11:12 ` Pali Rohár
2014-10-26 11:12 ` Pali Rohár
2014-10-26 12:00 ` Pavel Machek
2014-10-26 12:00 ` Pavel Machek
2014-10-26 12:00 ` Pavel Machek
2014-10-26 21:17 ` Pavel Machek
2014-10-26 21:17 ` Pavel Machek
2014-10-26 21:22 ` Pali Rohár
2014-10-26 21:22 ` Pali Rohár
2014-10-26 21:55 ` Pavel Machek
2014-10-26 21:55 ` Pavel Machek
2014-10-26 22:23 ` Pali Rohár
2014-10-26 22:23 ` Pali Rohár
2014-10-27 19:52 ` Tony Lindgren
2014-10-27 19:52 ` Tony Lindgren
2014-10-27 22:31 ` Tony Lindgren
2014-10-27 22:31 ` Tony Lindgren
2014-10-28 22:04 ` Pavel Machek
2014-10-28 22:04 ` Pavel Machek
2014-10-28 22:11 ` Tony Lindgren
2014-10-28 22:11 ` Tony Lindgren
2014-10-29 8:46 ` Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900) Pavel Machek
2014-10-29 8:46 ` Pavel Machek
2014-10-29 14:09 ` Tony Lindgren
2014-10-29 14:09 ` Tony Lindgren
2014-10-29 14:18 ` Tomi Valkeinen
2014-10-29 14:18 ` Tomi Valkeinen
2014-10-29 21:34 ` Pavel Machek
2014-10-29 21:34 ` Pavel Machek
2014-10-31 20:03 ` Pavel Machek [this message]
2014-10-31 20:03 ` Pavel Machek
2014-10-31 20:30 ` Pali Rohár
2014-10-31 20:30 ` Pali Rohár
2014-10-28 22:21 ` USB Ethernet gadget on Nokia n900 Pavel Machek
2014-10-28 22:21 ` Pavel Machek
2014-10-28 22:26 ` Tony Lindgren
2014-10-28 22:26 ` Tony Lindgren
2015-07-06 13:24 ` Pali Rohár
2015-07-06 13:24 ` Pali Rohár
2015-07-06 13:53 ` Tony Lindgren
2015-07-06 13:53 ` Tony Lindgren
2015-07-07 7:46 ` Pali Rohár
2015-07-07 7:46 ` Pali Rohár
2015-07-07 11:46 ` Tony Lindgren
2015-07-07 11:46 ` Tony Lindgren
2016-01-19 20:58 ` Pali Rohár
2016-01-19 20:58 ` Pali Rohár
2016-02-11 14:43 ` Pali Rohár
2016-02-11 14:43 ` Pali Rohár
2016-02-11 14:50 ` Pali Rohár
2016-02-11 14:50 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141031200318.GA6949@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sre@debian.org \
--cc=sre@ring0.de \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.