[PATCH 0/4] Support for DLINK DIR665

[PATCH 0/4] Support for DLINK DIR665

[Andrew Lunn]

The DLINK is a wireless access point using a Kirkwood processor
and a Marvell TopDog wifi chipset.

The base device tree file was provided by Claudio Leite. I've
performed a few cleanups, added dsa support for the in build switch,
and extended the defconfigs for regression testing.

Andrew Lunn (3):
  ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture
  ARM: mvebu: Add DLINK DIR665 options to mvebu_v5_defconfig
  ARM: config: Add DLINK DIR665 options to multi_v5_defconfig

Claudio Leite (1):
  ARM: Kirkwood: Add support for DLink DIR665

 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/kirkwood-dir665.dts | 278 ++++++++++++++++++++++++++++++++++
 arch/arm/configs/multi_v5_defconfig   |   2 +
 arch/arm/configs/mvebu_v5_defconfig   |   2 +
 4 files changed, 283 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-dir665.dts

-- 
2.1.1

[PATCH 1/4] ARM: Kirkwood: Add support for DLink DIR665

[Andrew Lunn]

From: Claudio Leite <leitec@staticky.com>

Add a device tree description of the DLINK DIR665 wireless access
point. The support for the 88E6171 switch will be added in a later
patch.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---

This description was mostly produced by Claudio Leite with a few
minor cleanups by my.
---
 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/kirkwood-dir665.dts | 233 ++++++++++++++++++++++++++++++++++
 2 files changed, 234 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-dir665.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89cafa1ab..31529ccc67a0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
 	kirkwood-d2net.dtb \
 	kirkwood-db-88f6281.dtb \
 	kirkwood-db-88f6282.dtb \
+	kirkwood-dir665.dtb \
 	kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
new file mode 100644
index 000000000000..ac945ea49940
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DIR-665";
+	compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie at 1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp at f1000000 {
+		pinctrl: pin-controller at 10000 {
+			pinctrl-0 =< &pmx_led_usb
+				     &pmx_led_internet_blue
+				     &pmx_led_internet_amber
+				     &pmx_led_5g &pmx_led_status_blue
+				     &pmx_led_wps &pmx_led_status_amber
+				     &pmx_led_24g
+				     &pmx_btn_restart &pmx_btn_wps>;
+			pinctrl-names = "default";
+
+			pmx_led_usb: pmx-led-usb {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_blue: pmx-led-internet-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_amber: pmx-led-internet-amber {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_5g: pmx-led-5g {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_blue: pmx-led-status-blue {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_wps: pmx-led-wps {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_amber: pmx-led-status-amber {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_24g: pmx-led-24g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_btn_restart: pmx-btn-restart {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_btn_wps: pmx-btn-wps {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi at 10600 {
+			status = "okay";
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d";
+				spi-max-frequency = <50000000>;
+				reg = <0>;
+
+				partition at 0 {
+					label = "uboot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "nvram";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				partition at 40000 {
+					label = "kernel";
+					reg = <0x40000 0x180000>;
+				};
+
+				partition at 1c0000 {
+					label = "rootfs";
+					reg = <0x1c0000 0xe00000>;
+				};
+
+				cal_data: partition at fc0000 {
+					label = "cal_data";
+					reg = <0xfc0000 0x10000>;
+					read-only;
+				};
+
+				partition at fd0000 {
+					label = "lang_pack";
+					reg = <0xfd0000 0x30000>;
+					read-only;
+				};
+			};
+		};
+
+		serial at 12000 {
+			status = "okay";
+		};
+
+		i2c at 11000 {
+			status = "okay";
+		};
+
+		ehci at 50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-usb {
+			label = "dir665:blue:usb";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		blue-internet {
+			/* Can only be turned on if the Internet
+			 * Ethernet port has Link
+			 */
+			label = "dir665:blue:internet";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		amber-internet {
+			label = "dir665:amber:internet";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wifi5g {
+			label = "dir665:blue:5g";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+		blue-status {
+			label = "dir665:blue:status";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wps {
+			label = "dir665:blue:wps";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		amber-status {
+			label = "dir665:amber:status";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+		blue-24g {
+			label = "dir665:blue:24g";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex. */
+&eth0 {
+	status = "okay";
+
+	ethernet0-port at 0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+/* eth1 is connected to the switch as well. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion. */
+
+&eth1 {
+	status = "disabled";
+};
+
+/* There is no battery on the boards, so the RTC does not keep time
+ * when there is now power, making it useless. */
+&rtc {
+	status = "disabled";
+};
-- 
2.1.1

[PATCH 1/4] ARM: Kirkwood: Add support for DLink DIR665

[Claudio Leite]

* Andrew Lunn (andrew at lunn.ch) wrote:
> From: Claudio Leite <leitec@staticky.com>
> 
> Add a device tree description of the DLINK DIR665 wireless access
> point. The support for the 88E6171 switch will be added in a later
> patch.
> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>

Signed-off-by: Claudio Leite <leitec@staticky.com>

> ---
> 
> This description was mostly produced by Claudio Leite with a few
> minor cleanups by my.
> ---
>  arch/arm/boot/dts/Makefile            |   1 +
>  arch/arm/boot/dts/kirkwood-dir665.dts | 233 ++++++++++++++++++++++++++++++++++
>  2 files changed, 234 insertions(+)
>  create mode 100644 arch/arm/boot/dts/kirkwood-dir665.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 38c89cafa1ab..31529ccc67a0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -104,6 +104,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
>  	kirkwood-d2net.dtb \
>  	kirkwood-db-88f6281.dtb \
>  	kirkwood-db-88f6282.dtb \
> +	kirkwood-dir665.dtb \
>  	kirkwood-dns320.dtb \
>  	kirkwood-dns325.dtb \
>  	kirkwood-dockstar.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
> new file mode 100644
> index 000000000000..ac945ea49940
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-dir665.dts
> @@ -0,0 +1,233 @@
> +/*
> + * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +
> +#include "kirkwood.dtsi"
> +#include "kirkwood-6281.dtsi"
> +
> +/ {
> +	model = "D-Link DIR-665";
> +	compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x8000000>; /* 128 MB */
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8 earlyprintk";
> +		stdout-path = &uart0;
> +	};
> +
> +	mbus {
> +		pcie-controller {
> +			status = "okay";
> +
> +			pcie at 1,0 {
> +				status = "okay";
> +			};
> +		};
> +	};
> +
> +	ocp at f1000000 {
> +		pinctrl: pin-controller at 10000 {
> +			pinctrl-0 =< &pmx_led_usb
> +				     &pmx_led_internet_blue
> +				     &pmx_led_internet_amber
> +				     &pmx_led_5g &pmx_led_status_blue
> +				     &pmx_led_wps &pmx_led_status_amber
> +				     &pmx_led_24g
> +				     &pmx_btn_restart &pmx_btn_wps>;
> +			pinctrl-names = "default";
> +
> +			pmx_led_usb: pmx-led-usb {
> +				marvell,pins = "mpp12";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_internet_blue: pmx-led-internet-blue {
> +				marvell,pins = "mpp42";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_internet_amber: pmx-led-internet-amber {
> +				marvell,pins = "mpp43";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_5g: pmx-led-5g {
> +				marvell,pins = "mpp44";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_status_blue: pmx-led-status-blue {
> +				marvell,pins = "mpp45";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_wps: pmx-led-wps {
> +				marvell,pins = "mpp47";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_status_amber: pmx-led-status-amber {
> +				marvell,pins = "mpp48";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_24g: pmx-led-24g {
> +				marvell,pins = "mpp49";
> +				marvell,function = "gpio";
> +			};
> +			pmx_btn_restart: pmx-btn-restart {
> +				marvell,pins = "mpp28";
> +				marvell,function = "gpio";
> +			};
> +			pmx_btn_wps: pmx-btn-wps {
> +				marvell,pins = "mpp46";
> +				marvell,function = "gpio";
> +			};
> +		};
> +
> +		spi at 10600 {
> +			status = "okay";
> +			m25p80 at 0 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				compatible = "mxicy,mx25l12805d";
> +				spi-max-frequency = <50000000>;
> +				reg = <0>;
> +
> +				partition at 0 {
> +					label = "uboot";
> +					reg = <0x0 0x30000>;
> +					read-only;
> +				};
> +
> +				partition at 30000 {
> +					label = "nvram";
> +					reg = <0x30000 0x10000>;
> +					read-only;
> +				};
> +
> +				partition at 40000 {
> +					label = "kernel";
> +					reg = <0x40000 0x180000>;
> +				};
> +
> +				partition at 1c0000 {
> +					label = "rootfs";
> +					reg = <0x1c0000 0xe00000>;
> +				};
> +
> +				cal_data: partition at fc0000 {
> +					label = "cal_data";
> +					reg = <0xfc0000 0x10000>;
> +					read-only;
> +				};
> +
> +				partition at fd0000 {
> +					label = "lang_pack";
> +					reg = <0xfd0000 0x30000>;
> +					read-only;
> +				};
> +			};
> +		};
> +
> +		serial at 12000 {
> +			status = "okay";
> +		};
> +
> +		i2c at 11000 {
> +			status = "okay";
> +		};
> +
> +		ehci at 50000 {
> +			status = "okay";
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		blue-usb {
> +			label = "dir665:blue:usb";
> +			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-internet {
> +			/* Can only be turned on if the Internet
> +			 * Ethernet port has Link
> +			 */
> +			label = "dir665:blue:internet";
> +			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> +		};
> +		amber-internet {
> +			label = "dir665:amber:internet";
> +			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-wifi5g {
> +			label = "dir665:blue:5g";
> +			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
> +		};
> +		blue-status {
> +			label = "dir665:blue:status";
> +			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-wps {
> +			label = "dir665:blue:wps";
> +			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> +		};
> +		amber-status {
> +			label = "dir665:amber:status";
> +			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-24g {
> +			label = "dir665:blue:24g";
> +			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reset {
> +			label = "reset";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
> +		};
> +		wps {
> +			label = "wps";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&mdio {
> +	status = "okay";
> +};
> +
> +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
> + * fixed speed and duplex. */
> +&eth0 {
> +	status = "okay";
> +
> +	ethernet0-port at 0 {
> +		speed = <1000>;
> +		duplex = <1>;
> +	};
> +};
> +
> +/* eth1 is connected to the switch as well. However DSA only supports a
> + * single CPU port. So leave this port disabled to avoid confusion. */
> +
> +&eth1 {
> +	status = "disabled";
> +};
> +
> +/* There is no battery on the boards, so the RTC does not keep time
> + * when there is now power, making it useless. */
> +&rtc {
> +	status = "disabled";
> +};
> -- 
> 2.1.1

[PATCH 1/4] ARM: Kirkwood: Add support for DLink DIR665

[Jason Cooper]

On Fri, Oct 31, 2014 at 11:13:30PM +0100, Andrew Lunn wrote:
> From: Claudio Leite <leitec@staticky.com>
> 
> Add a device tree description of the DLINK DIR665 wireless access
> point. The support for the 88E6171 switch will be added in a later
> patch.
> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
> 
> This description was mostly produced by Claudio Leite with a few
> minor cleanups by my.
> ---
>  arch/arm/boot/dts/Makefile            |   1 +
>  arch/arm/boot/dts/kirkwood-dir665.dts | 233 ++++++++++++++++++++++++++++++++++
>  2 files changed, 234 insertions(+)
>  create mode 100644 arch/arm/boot/dts/kirkwood-dir665.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 38c89cafa1ab..31529ccc67a0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -104,6 +104,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
>  	kirkwood-d2net.dtb \
>  	kirkwood-db-88f6281.dtb \
>  	kirkwood-db-88f6282.dtb \
> +	kirkwood-dir665.dtb \
>  	kirkwood-dns320.dtb \
>  	kirkwood-dns325.dtb \
>  	kirkwood-dockstar.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
> new file mode 100644
> index 000000000000..ac945ea49940
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-dir665.dts
> @@ -0,0 +1,233 @@
> +/*
> + * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +
> +#include "kirkwood.dtsi"
> +#include "kirkwood-6281.dtsi"
> +
> +/ {
> +	model = "D-Link DIR-665";
> +	compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x8000000>; /* 128 MB */
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8 earlyprintk";
> +		stdout-path = &uart0;
> +	};
> +
> +	mbus {
> +		pcie-controller {
> +			status = "okay";
> +
> +			pcie at 1,0 {
> +				status = "okay";
> +			};
> +		};
> +	};
> +
> +	ocp at f1000000 {
> +		pinctrl: pin-controller at 10000 {
> +			pinctrl-0 =< &pmx_led_usb
> +				     &pmx_led_internet_blue
> +				     &pmx_led_internet_amber
> +				     &pmx_led_5g &pmx_led_status_blue
> +				     &pmx_led_wps &pmx_led_status_amber
> +				     &pmx_led_24g
> +				     &pmx_btn_restart &pmx_btn_wps>;
> +			pinctrl-names = "default";
> +
> +			pmx_led_usb: pmx-led-usb {
> +				marvell,pins = "mpp12";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_internet_blue: pmx-led-internet-blue {
> +				marvell,pins = "mpp42";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_internet_amber: pmx-led-internet-amber {
> +				marvell,pins = "mpp43";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_5g: pmx-led-5g {
> +				marvell,pins = "mpp44";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_status_blue: pmx-led-status-blue {
> +				marvell,pins = "mpp45";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_wps: pmx-led-wps {
> +				marvell,pins = "mpp47";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_status_amber: pmx-led-status-amber {
> +				marvell,pins = "mpp48";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_24g: pmx-led-24g {
> +				marvell,pins = "mpp49";
> +				marvell,function = "gpio";
> +			};
> +			pmx_btn_restart: pmx-btn-restart {
> +				marvell,pins = "mpp28";
> +				marvell,function = "gpio";
> +			};
> +			pmx_btn_wps: pmx-btn-wps {
> +				marvell,pins = "mpp46";
> +				marvell,function = "gpio";
> +			};
> +		};
> +
> +		spi at 10600 {
> +			status = "okay";
> +			m25p80 at 0 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				compatible = "mxicy,mx25l12805d";
> +				spi-max-frequency = <50000000>;
> +				reg = <0>;
> +
> +				partition at 0 {
> +					label = "uboot";
> +					reg = <0x0 0x30000>;
> +					read-only;
> +				};
> +
> +				partition at 30000 {
> +					label = "nvram";
> +					reg = <0x30000 0x10000>;
> +					read-only;
> +				};
> +
> +				partition at 40000 {
> +					label = "kernel";
> +					reg = <0x40000 0x180000>;
> +				};
> +
> +				partition at 1c0000 {
> +					label = "rootfs";
> +					reg = <0x1c0000 0xe00000>;
> +				};
> +
> +				cal_data: partition at fc0000 {
> +					label = "cal_data";
> +					reg = <0xfc0000 0x10000>;
> +					read-only;
> +				};
> +
> +				partition at fd0000 {
> +					label = "lang_pack";
> +					reg = <0xfd0000 0x30000>;
> +					read-only;
> +				};
> +			};
> +		};
> +
> +		serial at 12000 {
> +			status = "okay";
> +		};
> +
> +		i2c at 11000 {
> +			status = "okay";
> +		};
> +
> +		ehci at 50000 {
> +			status = "okay";
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		blue-usb {
> +			label = "dir665:blue:usb";
> +			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-internet {
> +			/* Can only be turned on if the Internet
> +			 * Ethernet port has Link
> +			 */
> +			label = "dir665:blue:internet";
> +			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> +		};
> +		amber-internet {
> +			label = "dir665:amber:internet";
> +			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-wifi5g {
> +			label = "dir665:blue:5g";
> +			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
> +		};
> +		blue-status {
> +			label = "dir665:blue:status";
> +			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-wps {
> +			label = "dir665:blue:wps";
> +			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> +		};
> +		amber-status {
> +			label = "dir665:amber:status";
> +			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
> +		};
> +		blue-24g {
> +			label = "dir665:blue:24g";
> +			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reset {
> +			label = "reset";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
> +		};
> +		wps {
> +			label = "wps";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
> +
> +&mdio {
> +	status = "okay";
> +};
> +
> +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
> + * fixed speed and duplex. */
> +&eth0 {
> +	status = "okay";
> +
> +	ethernet0-port at 0 {
> +		speed = <1000>;
> +		duplex = <1>;
> +	};
> +};
> +
> +/* eth1 is connected to the switch as well. However DSA only supports a
> + * single CPU port. So leave this port disabled to avoid confusion. */
> +
> +&eth1 {
> +	status = "disabled";
> +};
> +
> +/* There is no battery on the boards, so the RTC does not keep time
> + * when there is now power, making it useless. */

Wow... so much for accurate logging.  At any rate, s/now/no/.  I'll fix
it up when I pull it in if there's nothing else.

thx,

Jason.

> +&rtc {
> +	status = "disabled";
> +};
> -- 
> 2.1.1
> 

[PATCH 1/4] ARM: Kirkwood: Add support for DLink DIR665

[Andrew Lunn]

> > +/* There is no battery on the boards, so the RTC does not keep time
> > + * when there is now power, making it useless. */
> 
> Wow... so much for accurate logging.  At any rate, s/now/no/.  I'll fix
> it up when I pull it in if there's nothing else.

Hi Jason

I assume the firmware use NTP, But strangely, there does appear to be
a crystal, at least i assume there is since there is no error message
at boot time about the clock not ticking. So it probably does keep
time so long as the power is on. I did wonder if my board has a flat
battery, but i cannot find a battery...

	Andrew

[PATCH 1/4] ARM: Kirkwood: Add support for DLink DIR665

[Jason Cooper]

On Sat, Nov 01, 2014 at 09:11:39PM +0100, Andrew Lunn wrote:
> > > +/* There is no battery on the boards, so the RTC does not keep time
> > > + * when there is now power, making it useless. */
> > 
> > Wow... so much for accurate logging.  At any rate, s/now/no/.  I'll fix
> > it up when I pull it in if there's nothing else.
> 
> Hi Jason
> 
> I assume the firmware use NTP, But strangely, there does appear to be
> a crystal, at least i assume there is since there is no error message
> at boot time about the clock not ticking. So it probably does keep
> time so long as the power is on. I did wonder if my board has a flat
> battery, but i cannot find a battery...

supercap?

thx,

Jason.

[PATCH 2/4] ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture

[Andrew Lunn]

The DIR665 has an 8 port Ethernet Switch, a Marvell mv88e6171. Add a
DSA node in DT, to instantiate DSA support for the 4 back panel ports,
the Internet port, and the port to the CPU which is connected to eth0.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 arch/arm/boot/dts/kirkwood-dir665.dts | 45 +++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index ac945ea49940..656e61ce414d 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -202,6 +202,51 @@
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	dsa at 0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0port>;
+		dsa,mii-bus = <&mdio>;
+
+		switch at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port at 0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port at 1 {
+			       reg = <1>;
+			       label = "lan3";
+			};
+
+			port at 2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port at 3 {
+			       reg = <3>;
+			       label = "lan1";
+			};
+
+			port at 4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port at 6 {
+			       reg = <6>;
+			       label = "cpu";
+			};
+		};
+	};
 };
 
 &mdio {
-- 
2.1.1

[PATCH 3/4] ARM: mvebu: Add DLINK DIR665 options to mvebu_v5_defconfig

[Andrew Lunn]

Enable building of the switch chip driver and the wireless driver
needed by the DLINK DIR665

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 arch/arm/configs/mvebu_v5_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 22058e18dfaa..824de499237b 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -67,9 +67,11 @@ CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6171=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
+CONFIG_MWL8K=m
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_INPUT_EVDEV=y
-- 
2.1.1

[PATCH 4/4] ARM: config: Add DLINK DIR665 options to multi_v5_defconfig

[Andrew Lunn]

Enable building of the switch chip driver and the wireless driver
needed by the DLINK DIR665

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: arm at kernel.org
---
 arch/arm/configs/multi_v5_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 018bef9fa7e8..9d56781a8f80 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -67,9 +67,11 @@ CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6171=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
+CONFIG_MWL8K=m
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_INPUT_EVDEV=y
-- 
2.1.1

[PATCH 4/4] ARM: config: Add DLINK DIR665 options to multi_v5_defconfig

[Jason Cooper]

arm-soc folks,

On Fri, Oct 31, 2014 at 11:13:33PM +0100, Andrew Lunn wrote:
> Enable building of the switch chip driver and the wireless driver
> needed by the DLINK DIR665
> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Cc: arm at kernel.org
> ---
>  arch/arm/configs/multi_v5_defconfig | 2 ++
>  1 file changed, 2 insertions(+)

I went ahead and picked this since I don't foresee too many conflicts
like there are with multi_v7_defconfig.  Please let me know if you would
prefer to take changes to this file directly.

thx,

Jason.

[PATCH 4/4] ARM: config: Add DLINK DIR665 options to multi_v5_defconfig

[Olof Johansson]

On Sat, Nov 01, 2014 at 07:42:20PM -0400, Jason Cooper wrote:
> arm-soc folks,
> 
> On Fri, Oct 31, 2014 at 11:13:33PM +0100, Andrew Lunn wrote:
> > Enable building of the switch chip driver and the wireless driver
> > needed by the DLINK DIR665
> > 
> > Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> > Cc: arm at kernel.org
> > ---
> >  arch/arm/configs/multi_v5_defconfig | 2 ++
> >  1 file changed, 2 insertions(+)
> 
> I went ahead and picked this since I don't foresee too many conflicts
> like there are with multi_v7_defconfig.  Please let me know if you would
> prefer to take changes to this file directly.

Depends on if there's much other v5 activity this cycle or not. I don't think
there is a whole lot so you should be safe.


-Olof

[PATCH 0/4] Support for DLINK DIR665

[Jason Cooper]

On Fri, Oct 31, 2014 at 11:13:29PM +0100, Andrew Lunn wrote:
> The DLINK is a wireless access point using a Kirkwood processor
> and a Marvell TopDog wifi chipset.
> 
> The base device tree file was provided by Claudio Leite. I've
> performed a few cleanups, added dsa support for the in build switch,
> and extended the defconfigs for regression testing.
> 
> Andrew Lunn (3):
>   ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture
>   ARM: mvebu: Add DLINK DIR665 options to mvebu_v5_defconfig
>   ARM: config: Add DLINK DIR665 options to multi_v5_defconfig
> 
> Claudio Leite (1):
>   ARM: Kirkwood: Add support for DLink DIR665
> 
>  arch/arm/boot/dts/Makefile            |   1 +
>  arch/arm/boot/dts/kirkwood-dir665.dts | 278 ++++++++++++++++++++++++++++++++++
>  arch/arm/configs/multi_v5_defconfig   |   2 +
>  arch/arm/configs/mvebu_v5_defconfig   |   2 +
>  4 files changed, 283 insertions(+)
>  create mode 100644 arch/arm/boot/dts/kirkwood-dir665.dts

Applied patches 1 and 2 with a small comment tweak to mvebu/dt.

Applied patches 3 and 4 to mvebu/defconfig since we are the only active
modifiers of multi_v5_defconfig, so I don't foresee huge conflicts there
like we get with multi_v7_defconfig.

thx,

Jason.