From: LKP <lkp@01.org>
To: lkp@lists.01.org
Subject: [dmi] PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
Date: Fri, 07 Nov 2014 13:47:41 +0800 [thread overview]
Message-ID: <20141107054741.GB30507@yliu-dev.sh.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 2486 bytes --]
FYI, we noticed the below changes on
https://git.linaro.org/people/ard.biesheuvel/linux-arm efi-for-3.19
commit aacdce6e880894acb57d71dcb2e3fc61b4ed4e96 ("dmi: add support for SMBIOS 3.0 64-bit entry point")
+-----------------------+------------+------------+
| | 2fa165a26c | aacdce6e88 |
+-----------------------+------------+------------+
| boot_successes | 20 | 10 |
| early-boot-hang | 1 | |
| boot_failures | 0 | 5 |
| PANIC:early_exception | 0 | 5 |
+-----------------------+------------+------------+
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000036fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-gc5221e6 #1
[ 0.000000] 0000000000000000 ffffffff82203d30 ffffffff819f0a6e 00000000000003f8
[ 0.000000] ffffffffff240000 ffffffff82203e18 ffffffff823701b0 ffffffff82511401
[ 0.000000] 0000000000000000 0000000000000ba3 0000000000000000 ffffffffff240000
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff819f0a6e>] dump_stack+0x4e/0x68
[ 0.000000] [<ffffffff823701b0>] early_idt_handler+0x90/0xb7
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff81899e6b>] ? dmi_table+0x3f/0x94
[ 0.000000] [<ffffffff81899e42>] ? dmi_table+0x16/0x94
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c7eff>] dmi_walk_early+0x44/0x69
[ 0.000000] [<ffffffff823c88a2>] dmi_present+0x180/0x1ff
[ 0.000000] [<ffffffff823c8ab3>] dmi_scan_machine+0x144/0x191
[ 0.000000] [<ffffffff82370702>] ? loglevel+0x31/0x31
[ 0.000000] [<ffffffff82377f52>] setup_arch+0x490/0xc73
[ 0.000000] [<ffffffff819eef73>] ? printk+0x4d/0x4f
[ 0.000000] [<ffffffff82370b90>] start_kernel+0x9c/0x43f
[ 0.000000] [<ffffffff82370120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff823704a2>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff823705df>] x86_64_start_kernel+0x13b/0x14a
[ 0.000000] RIP 0x4
_______________________________________________
LKP mailing list
LKP(a)linux.intel.com
[-- Attachment #2: dmesg.ksh --]
[-- Type: text/plain, Size: 4452 bytes --]
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.0-rc2-gc5221e6 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP Wed Oct 29 11:52:18 CST 2014
[ 0.000000] Command line: BOOT_IMAGE=/kernel/x86_64-lkp/c5221e6c2fcfa2f0f1871b672edbf8ea0f055213/vmlinuz-3.18.0-rc2-gc5221e6 user=lkp job=/lkp/scheduled/lkp-ne04/boot_boot-performance-1-x86_64-lkp-c5221e6c2fcfa2f0f1871b672edbf8ea0f055213-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/c5221e6c2fcfa2f0f1871b672edbf8ea0f055213/vmlinuz-3.18.0-rc2-gc5221e6 kconfig=x86_64-lkp commit=c5221e6c2fcfa2f0f1871b672edbf8ea0f055213 branch=linux-devel/devel-hourly-2014102911 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/lkp-ne04/boot/performance-1/debian-x86_64.cgz/x86_64-lkp/c5221e6c2fcfa2f0f1871b672edbf8ea0f055213/0 ip=::::lkp-ne04::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009a3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008c555fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008c556000-0x000000008c628fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008c629000-0x000000008c701fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008c702000-0x000000008db01fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008db02000-0x000000008f601fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f602000-0x000000008f64efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f64f000-0x000000008f6e5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6e6000-0x000000008f6effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f6f0000-0x000000008f6f1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6f2000-0x000000008f7cefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f7cf000-0x000000008f7fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a0000000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fcffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000036fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-gc5221e6 #1
[ 0.000000] 0000000000000000 ffffffff82203d30 ffffffff819f0a6e 00000000000003f8
[ 0.000000] ffffffffff240000 ffffffff82203e18 ffffffff823701b0 ffffffff82511401
[ 0.000000] 0000000000000000 0000000000000ba3 0000000000000000 ffffffffff240000
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff819f0a6e>] dump_stack+0x4e/0x68
[ 0.000000] [<ffffffff823701b0>] early_idt_handler+0x90/0xb7
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff81899e6b>] ? dmi_table+0x3f/0x94
[ 0.000000] [<ffffffff81899e42>] ? dmi_table+0x16/0x94
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c7eff>] dmi_walk_early+0x44/0x69
[ 0.000000] [<ffffffff823c88a2>] dmi_present+0x180/0x1ff
[ 0.000000] [<ffffffff823c8ab3>] dmi_scan_machine+0x144/0x191
[ 0.000000] [<ffffffff82370702>] ? loglevel+0x31/0x31
[ 0.000000] [<ffffffff82377f52>] setup_arch+0x490/0xc73
[ 0.000000] [<ffffffff819eef73>] ? printk+0x4d/0x4f
[ 0.000000] [<ffffffff82370b90>] start_kernel+0x9c/0x43f
[ 0.000000] [<ffffffff82370120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff823704a2>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff823705df>] x86_64_start_kernel+0x13b/0x14a
[ 0.000000] RIP 0x4
WARNING: multiple messages have this Message-ID (diff)
From: LKP <lkp@01.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
lkp@01.org, Yuanhan Liu <yuanhan.liu@linux.intel.com>
Subject: [LKP] [dmi] PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
Date: Fri, 7 Nov 2014 13:47:41 +0800 [thread overview]
Message-ID: <20141107054741.GB30507@yliu-dev.sh.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 2351 bytes --]
FYI, we noticed the below changes on
https://git.linaro.org/people/ard.biesheuvel/linux-arm efi-for-3.19
commit aacdce6e880894acb57d71dcb2e3fc61b4ed4e96 ("dmi: add support for SMBIOS 3.0 64-bit entry point")
+-----------------------+------------+------------+
| | 2fa165a26c | aacdce6e88 |
+-----------------------+------------+------------+
| boot_successes | 20 | 10 |
| early-boot-hang | 1 | |
| boot_failures | 0 | 5 |
| PANIC:early_exception | 0 | 5 |
+-----------------------+------------+------------+
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000036fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-gc5221e6 #1
[ 0.000000] 0000000000000000 ffffffff82203d30 ffffffff819f0a6e 00000000000003f8
[ 0.000000] ffffffffff240000 ffffffff82203e18 ffffffff823701b0 ffffffff82511401
[ 0.000000] 0000000000000000 0000000000000ba3 0000000000000000 ffffffffff240000
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff819f0a6e>] dump_stack+0x4e/0x68
[ 0.000000] [<ffffffff823701b0>] early_idt_handler+0x90/0xb7
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff81899e6b>] ? dmi_table+0x3f/0x94
[ 0.000000] [<ffffffff81899e42>] ? dmi_table+0x16/0x94
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c7eff>] dmi_walk_early+0x44/0x69
[ 0.000000] [<ffffffff823c88a2>] dmi_present+0x180/0x1ff
[ 0.000000] [<ffffffff823c8ab3>] dmi_scan_machine+0x144/0x191
[ 0.000000] [<ffffffff82370702>] ? loglevel+0x31/0x31
[ 0.000000] [<ffffffff82377f52>] setup_arch+0x490/0xc73
[ 0.000000] [<ffffffff819eef73>] ? printk+0x4d/0x4f
[ 0.000000] [<ffffffff82370b90>] start_kernel+0x9c/0x43f
[ 0.000000] [<ffffffff82370120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff823704a2>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff823705df>] x86_64_start_kernel+0x13b/0x14a
[ 0.000000] RIP 0x4
[-- Attachment #2: .dmesg --]
[-- Type: text/plain, Size: 4452 bytes --]
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.0-rc2-gc5221e6 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP Wed Oct 29 11:52:18 CST 2014
[ 0.000000] Command line: BOOT_IMAGE=/kernel/x86_64-lkp/c5221e6c2fcfa2f0f1871b672edbf8ea0f055213/vmlinuz-3.18.0-rc2-gc5221e6 user=lkp job=/lkp/scheduled/lkp-ne04/boot_boot-performance-1-x86_64-lkp-c5221e6c2fcfa2f0f1871b672edbf8ea0f055213-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/c5221e6c2fcfa2f0f1871b672edbf8ea0f055213/vmlinuz-3.18.0-rc2-gc5221e6 kconfig=x86_64-lkp commit=c5221e6c2fcfa2f0f1871b672edbf8ea0f055213 branch=linux-devel/devel-hourly-2014102911 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/lkp-ne04/boot/performance-1/debian-x86_64.cgz/x86_64-lkp/c5221e6c2fcfa2f0f1871b672edbf8ea0f055213/0 ip=::::lkp-ne04::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009a3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008c555fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008c556000-0x000000008c628fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008c629000-0x000000008c701fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008c702000-0x000000008db01fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008db02000-0x000000008f601fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f602000-0x000000008f64efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f64f000-0x000000008f6e5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6e6000-0x000000008f6effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f6f0000-0x000000008f6f1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6f2000-0x000000008f7cefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f7cf000-0x000000008f7fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a0000000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fcffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000036fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-gc5221e6 #1
[ 0.000000] 0000000000000000 ffffffff82203d30 ffffffff819f0a6e 00000000000003f8
[ 0.000000] ffffffffff240000 ffffffff82203e18 ffffffff823701b0 ffffffff82511401
[ 0.000000] 0000000000000000 0000000000000ba3 0000000000000000 ffffffffff240000
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff819f0a6e>] dump_stack+0x4e/0x68
[ 0.000000] [<ffffffff823701b0>] early_idt_handler+0x90/0xb7
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff81899e6b>] ? dmi_table+0x3f/0x94
[ 0.000000] [<ffffffff81899e42>] ? dmi_table+0x16/0x94
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
[ 0.000000] [<ffffffff823c7eff>] dmi_walk_early+0x44/0x69
[ 0.000000] [<ffffffff823c88a2>] dmi_present+0x180/0x1ff
[ 0.000000] [<ffffffff823c8ab3>] dmi_scan_machine+0x144/0x191
[ 0.000000] [<ffffffff82370702>] ? loglevel+0x31/0x31
[ 0.000000] [<ffffffff82377f52>] setup_arch+0x490/0xc73
[ 0.000000] [<ffffffff819eef73>] ? printk+0x4d/0x4f
[ 0.000000] [<ffffffff82370b90>] start_kernel+0x9c/0x43f
[ 0.000000] [<ffffffff82370120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff823704a2>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff823705df>] x86_64_start_kernel+0x13b/0x14a
[ 0.000000] RIP 0x4
[-- Attachment #3: Type: text/plain, Size: 85 bytes --]
_______________________________________________
LKP mailing list
LKP@linux.intel.com
next reply other threads:[~2014-11-07 5:47 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 5:47 LKP [this message]
2014-11-07 5:47 ` [LKP] [dmi] PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000 LKP
2014-11-07 7:17 ` Ard Biesheuvel
2014-11-07 7:17 ` [LKP] " Ard Biesheuvel
2014-11-07 7:37 ` Yuanhan Liu
2014-11-07 7:37 ` [LKP] " Yuanhan Liu
2014-11-07 7:44 ` Ard Biesheuvel
2014-11-07 7:44 ` [LKP] " Ard Biesheuvel
2014-11-07 8:13 ` Yuanhan Liu
2014-11-07 8:13 ` [LKP] " Yuanhan Liu
2014-11-07 8:23 ` Ard Biesheuvel
2014-11-07 8:23 ` [LKP] " Ard Biesheuvel
2014-11-07 8:46 ` Yuanhan Liu
2014-11-07 8:46 ` [LKP] " Yuanhan Liu
2014-11-07 9:03 ` Ard Biesheuvel
2014-11-07 9:03 ` [LKP] " Ard Biesheuvel
2014-11-07 9:26 ` Yuanhan Liu
2014-11-07 9:26 ` [LKP] " Yuanhan Liu
2014-11-07 9:35 ` Ard Biesheuvel
2014-11-07 9:35 ` [LKP] " Ard Biesheuvel
2014-11-07 9:36 ` Ard Biesheuvel
2014-11-07 9:36 ` [LKP] " Ard Biesheuvel
2014-11-07 10:14 ` Yuanhan Liu
2014-11-07 10:14 ` [LKP] " Yuanhan Liu
2014-11-07 10:16 ` Ard Biesheuvel
2014-11-07 10:16 ` [LKP] " Ard Biesheuvel
2014-11-07 9:36 ` Matt Fleming
2014-11-07 9:36 ` [LKP] " Matt Fleming
2014-11-07 9:40 ` Ard Biesheuvel
2014-11-07 9:40 ` [LKP] " Ard Biesheuvel
2014-11-07 9:16 ` Matt Fleming
2014-11-07 9:16 ` [LKP] " Matt Fleming
2014-11-07 9:30 ` Yuanhan Liu
2014-11-07 9:30 ` [LKP] " Yuanhan Liu
2014-11-07 11:07 ` Matt Fleming
2014-11-07 11:07 ` [LKP] " Matt Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141107054741.GB30507@yliu-dev.sh.intel.com \
--to=lkp@01.org \
--cc=lkp@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.