From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] virt: kvm: arm: vgic: Return failure code '-EBUSY' when mutex_trylock() fails
Date: Wed, 12 Nov 2014 20:41:44 +0100 [thread overview]
Message-ID: <20141112194144.GK19598@cbox> (raw)
In-Reply-To: <546376F7.90502@gmail.com>
On Wed, Nov 12, 2014 at 11:04:23PM +0800, Chen Gang wrote:
> When mutex_trylock() fails, kvm_vgic_create() will not create 'vgic', so
> it need return failure code '-EBUSY' instead of '0' to let outside know
> about it.
I already sent a patch for the -EBUSY:
https://lists.cs.columbia.edu/pipermail/kvmarm/2014-November/011936.html
>
> Also simplify the code within kvm_vgic_create():
>
> - kvm_for_each_vcpu() scanning once is enough for current case.
>
> - Remove redundant variable 'vcpu_lock_idx'.
I don't like using the iterator variable for this kind of thing because
it can really break in languages where i is out-of-scope after the loop
and it is too easy to reuse the iterator variable in later versions of
the code.
That being said, the scanning once is slightly prettier I guess,
but I'd rather not introduce the churn unless others (Marc) think this
is a big win.
-Christoffer
>
>
> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
> ---
> virt/kvm/arm/vgic.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 3aaca49..5846725 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -1933,7 +1933,7 @@ out:
>
> int kvm_vgic_create(struct kvm *kvm)
> {
> - int i, vcpu_lock_idx = -1, ret = 0;
> + int i, ret = 0;
> struct kvm_vcpu *vcpu;
>
> mutex_lock(&kvm->lock);
> @@ -1949,13 +1949,12 @@ int kvm_vgic_create(struct kvm *kvm)
> * that no other VCPUs are run while we create the vgic.
> */
> kvm_for_each_vcpu(i, vcpu, kvm) {
> - if (!mutex_trylock(&vcpu->mutex))
> + if (!mutex_trylock(&vcpu->mutex)) {
> + ret = -EBUSY;
> goto out_unlock;
> - vcpu_lock_idx = i;
> - }
> -
> - kvm_for_each_vcpu(i, vcpu, kvm) {
> + }
> if (vcpu->arch.has_run_once) {
> + mutex_unlock(&vcpu->mutex);
> ret = -EBUSY;
> goto out_unlock;
> }
> @@ -1968,8 +1967,8 @@ int kvm_vgic_create(struct kvm *kvm)
> kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
>
> out_unlock:
> - for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
> - vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
> + while (i-- > 0) {
> + vcpu = kvm_get_vcpu(kvm, i);
> mutex_unlock(&vcpu->mutex);
> }
>
> --
> 1.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Christoffer Dall <christoffer.dall@linaro.org>
To: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: marc.zyngier@arm.com, gleb@kernel.org,
Paolo Bonzini <pbonzini@redhat.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] virt: kvm: arm: vgic: Return failure code '-EBUSY' when mutex_trylock() fails
Date: Wed, 12 Nov 2014 20:41:44 +0100 [thread overview]
Message-ID: <20141112194144.GK19598@cbox> (raw)
In-Reply-To: <546376F7.90502@gmail.com>
On Wed, Nov 12, 2014 at 11:04:23PM +0800, Chen Gang wrote:
> When mutex_trylock() fails, kvm_vgic_create() will not create 'vgic', so
> it need return failure code '-EBUSY' instead of '0' to let outside know
> about it.
I already sent a patch for the -EBUSY:
https://lists.cs.columbia.edu/pipermail/kvmarm/2014-November/011936.html
>
> Also simplify the code within kvm_vgic_create():
>
> - kvm_for_each_vcpu() scanning once is enough for current case.
>
> - Remove redundant variable 'vcpu_lock_idx'.
I don't like using the iterator variable for this kind of thing because
it can really break in languages where i is out-of-scope after the loop
and it is too easy to reuse the iterator variable in later versions of
the code.
That being said, the scanning once is slightly prettier I guess,
but I'd rather not introduce the churn unless others (Marc) think this
is a big win.
-Christoffer
>
>
> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
> ---
> virt/kvm/arm/vgic.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 3aaca49..5846725 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -1933,7 +1933,7 @@ out:
>
> int kvm_vgic_create(struct kvm *kvm)
> {
> - int i, vcpu_lock_idx = -1, ret = 0;
> + int i, ret = 0;
> struct kvm_vcpu *vcpu;
>
> mutex_lock(&kvm->lock);
> @@ -1949,13 +1949,12 @@ int kvm_vgic_create(struct kvm *kvm)
> * that no other VCPUs are run while we create the vgic.
> */
> kvm_for_each_vcpu(i, vcpu, kvm) {
> - if (!mutex_trylock(&vcpu->mutex))
> + if (!mutex_trylock(&vcpu->mutex)) {
> + ret = -EBUSY;
> goto out_unlock;
> - vcpu_lock_idx = i;
> - }
> -
> - kvm_for_each_vcpu(i, vcpu, kvm) {
> + }
> if (vcpu->arch.has_run_once) {
> + mutex_unlock(&vcpu->mutex);
> ret = -EBUSY;
> goto out_unlock;
> }
> @@ -1968,8 +1967,8 @@ int kvm_vgic_create(struct kvm *kvm)
> kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
>
> out_unlock:
> - for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
> - vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
> + while (i-- > 0) {
> + vcpu = kvm_get_vcpu(kvm, i);
> mutex_unlock(&vcpu->mutex);
> }
>
> --
> 1.9.3
next prev parent reply other threads:[~2014-11-12 19:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-12 15:04 [PATCH] virt: kvm: arm: vgic: Return failure code '-EBUSY' when mutex_trylock() fails Chen Gang
2014-11-12 15:04 ` Chen Gang
2014-11-12 19:41 ` Christoffer Dall [this message]
2014-11-12 19:41 ` Christoffer Dall
2014-11-13 2:34 ` Chen Gang
2014-11-13 2:34 ` Chen Gang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141112194144.GK19598@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.