From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 6/7] ARM: dts: sun6i: Add EHCI support for the M9 board
Date: Thu, 13 Nov 2014 16:47:49 +0000 [thread overview]
Message-ID: <20141113164749.GN20972@lukather> (raw)
In-Reply-To: <1415871109-28332-6-git-send-email-hdegoede@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 639 bytes --]
On Thu, Nov 13, 2014 at 10:31:48AM +0100, Hans de Goede wrote:
> The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal
> usb wifi card, the other to a build-in usb-hub, so neither need their
> OHCI companion controller to be enabled since the are always connected at
> USB-2 speeds.
>
> The controller which is attached to the wifi also does not need a vbus
> regulator.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Applied, with a newline before the pinctrl node.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] ARM: dts: sun6i: Add EHCI support for the M9 board
Date: Thu, 13 Nov 2014 17:47:49 +0100 [thread overview]
Message-ID: <20141113164749.GN20972@lukather> (raw)
In-Reply-To: <1415871109-28332-6-git-send-email-hdegoede@redhat.com>
On Thu, Nov 13, 2014 at 10:31:48AM +0100, Hans de Goede wrote:
> The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal
> usb wifi card, the other to a build-in usb-hub, so neither need their
> OHCI companion controller to be enabled since the are always connected at
> USB-2 speeds.
>
> The controller which is attached to the wifi also does not need a vbus
> regulator.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Applied, with a newline before the pinctrl node.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141113/4e452451/attachment-0001.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH 6/7] ARM: dts: sun6i: Add EHCI support for the M9 board
Date: Thu, 13 Nov 2014 17:47:49 +0100 [thread overview]
Message-ID: <20141113164749.GN20972@lukather> (raw)
In-Reply-To: <1415871109-28332-6-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 647 bytes --]
On Thu, Nov 13, 2014 at 10:31:48AM +0100, Hans de Goede wrote:
> The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal
> usb wifi card, the other to a build-in usb-hub, so neither need their
> OHCI companion controller to be enabled since the are always connected at
> USB-2 speeds.
>
> The controller which is attached to the wifi also does not need a vbus
> regulator.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Applied, with a newline before the pinctrl node.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2014-11-13 16:47 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-13 9:31 [PATCH 1/7] ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` [PATCH 2/7] ARM: dts: sun4i: Add simplefb node Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` [PATCH 3/7] ARM: dts: sun5i: " Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` [PATCH 4/7] ARM: dts: sun6i: " Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 16:46 ` Maxime Ripard
2014-11-13 16:46 ` Maxime Ripard
2014-11-13 16:46 ` Maxime Ripard
2014-11-13 17:52 ` Hans de Goede
2014-11-13 17:52 ` Hans de Goede
2014-11-13 17:52 ` Hans de Goede
2014-11-14 10:24 ` Maxime Ripard
2014-11-14 10:24 ` Maxime Ripard
2014-11-14 10:24 ` Maxime Ripard
2014-11-14 10:30 ` Hans de Goede
2014-11-14 10:30 ` Hans de Goede
2014-11-14 10:30 ` Hans de Goede
2014-11-14 11:21 ` Maxime Ripard
2014-11-14 11:21 ` Maxime Ripard
2014-11-14 11:21 ` Maxime Ripard
2014-11-13 9:31 ` [PATCH 5/7] ARM: dts: sun7i: " Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` [PATCH 6/7] ARM: dts: sun6i: Add EHCI support for the M9 board Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 16:47 ` Maxime Ripard [this message]
2014-11-13 16:47 ` Maxime Ripard
2014-11-13 16:47 ` Maxime Ripard
2014-11-13 9:31 ` [PATCH 7/7] ARM: dts: sun6i: Add support for the status led Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 9:31 ` Hans de Goede
2014-11-13 16:48 ` Maxime Ripard
2014-11-13 16:48 ` Maxime Ripard
2014-11-13 16:48 ` Maxime Ripard
2014-11-13 16:49 ` [PATCH 1/7] ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator Maxime Ripard
2014-11-13 16:49 ` Maxime Ripard
2014-11-13 16:49 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141113164749.GN20972@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.