From: Pavel Machek <pavel@ucw.cz>
To: pali.rohar@gmail.com, sre@debian.org, sre@ring0.de,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com
Subject: 3.19-rc0: video stops working after update
Date: Fri, 12 Dec 2014 14:55:33 +0100 [thread overview]
Message-ID: <20141212135533.GA31299@amd> (raw)
Hi!
After updating tree based on -pali to
2756d373a3f45a3a9ebf4ac389f9e0e02bd35a93 (and trimming down dts to
make it boot, as I'm still hiting dts size limit), video stops
working.
I also found this nastiness in dmesg:
Ideas welcome.
Best regards,
Pavel
[ 0.285583] Thumb binaries may crash randomly without this
workaround
[ 0.285644] RX-51: Registring OMAP3 HWRNG device
[ 0.290679] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.293182] In-band Error seen by MPU at address 0
[ 0.293243] ------------[ cut here ]------------
[ 0.293304] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166
omap3_l3_app_irq+0
xd4/0x124()
[ 0.293365] Modules linked in:
[ 0.293426] CPU: 0 PID: 1 Comm: swapper Not tainted
3.18.0-omap3-76150-g3d3c12d-dirty #737
[ 0.293487] Backtrace:
[ 0.293548] [<c0011630>] (dump_backtrace) from [<c00117cc>]
(show_stack+0x18/0x1c)
[ 0.293579] r6:c06cad30 r5:000000a6 r4:00000000 r3:00000000
[ 0.293670] [<c00117b4>] (show_stack) from [<c056f86c>]
(dump_stack+0x20/0x28)
[ 0.293731] [<c056f84c>] (dump_stack) from [<c0036f90>]
(warn_slowpath_common+0x7c/0xb4)
[ 0.293823] [<c0036f14>] (warn_slowpath_common) from [<c0036fec>]
(warn_slowpath_null+0x24/0x2c)
[ 0.293853] r8:00000013 r7:f8001400 r6:00000000 r5:00000000
r4:04001b00
[ 0.293945] [<c0036fc8>] (warn_slowpath_null) from [<c0225c84>]
(omap3_l3_app_irq+0xd4/0x124)
[ 0.294036] [<c0225bb0>] (omap3_l3_app_irq) from [<c00628dc>]
(handle_irq_event_percpu+0x54/0x164)
[ 0.294097] r7:00000000 r6:00000000 r5:cf89ec40 r4:cf89ec40
[ 0.294158] [<c0062888>] (handle_irq_event_percpu) from
[<c0062a44>] (handle_irq_event+0x58/0x8c)
[ 0.294219] r10:cf803200 r9:20000113 r8:0000000a r7:cf843ce0
r6:00000000 r5:cf89ec40
[ 0.294311] r4:cf8ed240
[ 0.294342] [<c00629ec>] (handle_irq_event) from [<c0065478>]
(handle_level_irq+0xdc/0x15c)
[ 0.294403] r5:00000000 r4:cf8ed240
[ 0.294464] [<c006539c>] (handle_level_irq) from [<c0062130>]
(generic_handle_irq+0x28/0x38)
[ 0.294494] r4:00000013 r3:c006539c
[ 0.294555] [<c0062108>] (generic_handle_irq) from [<c0062300>]
(__handle_domain_irq+0x68/0xc4)
[ 0.294616] r4:c07a9cf8 r3:00000103
[ 0.294677] [<c0062298>] (__handle_domain_irq) from [<c0008700>]
(omap_intc_handle_irq+0xbc/0xcc)
[ 0.294738] r10:60000113 r8:00000000 r7:c08d8700 r6:cf843ce0
r5:c07a9ed0 r4:0000000a
[ 0.294830] [<c0008644>] (omap_intc_handle_irq) from [<c0012280>]
(__irq_svc+0x40/0x74)
[ 0.294891] Exception stack(0xcf843ce0 to 0xcf843d28)
[ 0.294921] 3ce0: cf978600 c079fe88 00000001 00000000 cf978600
c079fe88 0000001c 00000000
[ 0.294982] 3d00: cf978634 20000113 60000113 cf843d54 cf843d28
cf843d28 c0063c50 c0063d2c
[ 0.295043] 3d20: 60000113 ffffffff
[ 0.295074] r8:cf978634 r7:cf843d14 r6:ffffffff r5:60000113
r4:c0063d2c r3:c0063c50
[ 0.295166] [<c0063990>] (__setup_irq) from [<c00640f0>]
(setup_irq+0x48/0x90)
[ 0.295227] r10:cf842000 r8:ffffffff r7:80000000 r6:c079fe88
r5:0000001c r4:cf978600
[ 0.295318] [<c00640a8>] (setup_irq) from [<c0031a98>]
(omap_system_dma_probe+0x214/0x2fc)
[ 0.295379] r6:0000001c r5:c07cb044 r4:00000020 r3:00000000
[ 0.295471] [<c0031884>] (omap_system_dma_probe) from [<c029aaac>]
(platform_drv_probe+0x50/0xac)
[ 0.295532] r10:cf842000 r9:00000000 r8:00000000 r7:c079fe44
r6:fffffdfb r5:cf985e10
[ 0.295593] r4:ffffffed
[ 0.295654] [<c029aa5c>] (platform_drv_probe) from [<c029934c>]
(driver_probe_device+0x10c/0x22c)
[ 0.295715] r7:c079fe44 r6:00000000 r5:cf985e10 r4:c08def30
[ 0.295776] [<c0299240>] (driver_probe_device) from [<c0299500>]
(__driver_attach+0x94/0x98)
[ 0.295837] r8:c07527f0 r7:00000000 r6:cf985e44 r5:c079fe44
r4:cf985e10 r3:00000000
[ 0.295928] [<c029946c>] (__driver_attach) from [<c02979c8>]
(bus_for_each_dev+0x5c/0x90)
[ 0.295989] r6:c029946c r5:c079fe44 r4:00000000 r3:00000000
[ 0.296081] [<c029796c>] (bus_for_each_dev) from [<c0298e48>]
(driver_attach+0x24/0x28)
[ 0.296112] r6:c07b0410 r5:cf881a80 r4:c079fe44
[ 0.296173] [<c0298e24>] (driver_attach) from [<c0298ac8>]
(bus_add_driver+0xdc/0x1d8)
[ 0.296264] [<c02989ec>] (bus_add_driver) from [<c0299bf0>]
(driver_register+0x80/0xfc)
[ 0.296295] r7:000000b8 r6:cf988580 r5:c0789be0 r4:c079fe44
[ 0.296386] [<c0299b70>] (driver_register) from [<c029a928>]
(__platform_driver_register+0x50/0x64)
[ 0.296447] r5:c0789be0 r4:c0789be0
[ 0.296508] [<c029a8d8>] (__platform_driver_register) from
[<c0752808>] (omap_system_dma_init+0x18/0x20)
[ 0.296569] [<c07527f0>] (omap_system_dma_init) from [<c0008998>]
(do_one_initcall+0x88/0x1cc)
[ 0.296661] [<c0008910>] (do_one_initcall) from [<c0744d94>]
(kernel_init_freeable+0xf0/0x1b8)
[ 0.296691] r10:c0773014 r9:c0772ffc r8:c07445ec r7:000000b8
r6:c07ca440 r5:00000003
[ 0.296783] r4:c077e570
[ 0.296844] [<c0744ca4>] (kernel_init_freeable) from [<c056b04c>]
(kernel_init+0x10/0xec)
[ 0.296874] r10:00000000 r9:00000000 r8:00000000 r7:00000000
r6:00000000 r5:c056b03c
[ 0.296966] r4:00000000
[ 0.296997] [<c056b03c>] (kernel_init) from [<c000ebd8>]
(ret_from_fork+0x14/0x3c)
[ 0.297058] r4:00000000 r3:00000000
[ 0.297149] ---[ end trace d174f22d07c1fabd ]---
[ 0.297241] Reserving DMA channels 0 and 1 for HS ROM code
[ 0.297302] OMAP DMA hardware revision 4.0
[ 0.445098] omap-dma-engine 48056000.dma-controller: OMAP DMA
engine driver
[ 0.452148] SCSI subsystem initialized
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: 3.19-rc0: video stops working after update
Date: Fri, 12 Dec 2014 14:55:33 +0100 [thread overview]
Message-ID: <20141212135533.GA31299@amd> (raw)
Hi!
After updating tree based on -pali to
2756d373a3f45a3a9ebf4ac389f9e0e02bd35a93 (and trimming down dts to
make it boot, as I'm still hiting dts size limit), video stops
working.
I also found this nastiness in dmesg:
Ideas welcome.
Best regards,
Pavel
[ 0.285583] Thumb binaries may crash randomly without this
workaround
[ 0.285644] RX-51: Registring OMAP3 HWRNG device
[ 0.290679] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.293182] In-band Error seen by MPU at address 0
[ 0.293243] ------------[ cut here ]------------
[ 0.293304] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166
omap3_l3_app_irq+0
xd4/0x124()
[ 0.293365] Modules linked in:
[ 0.293426] CPU: 0 PID: 1 Comm: swapper Not tainted
3.18.0-omap3-76150-g3d3c12d-dirty #737
[ 0.293487] Backtrace:
[ 0.293548] [<c0011630>] (dump_backtrace) from [<c00117cc>]
(show_stack+0x18/0x1c)
[ 0.293579] r6:c06cad30 r5:000000a6 r4:00000000 r3:00000000
[ 0.293670] [<c00117b4>] (show_stack) from [<c056f86c>]
(dump_stack+0x20/0x28)
[ 0.293731] [<c056f84c>] (dump_stack) from [<c0036f90>]
(warn_slowpath_common+0x7c/0xb4)
[ 0.293823] [<c0036f14>] (warn_slowpath_common) from [<c0036fec>]
(warn_slowpath_null+0x24/0x2c)
[ 0.293853] r8:00000013 r7:f8001400 r6:00000000 r5:00000000
r4:04001b00
[ 0.293945] [<c0036fc8>] (warn_slowpath_null) from [<c0225c84>]
(omap3_l3_app_irq+0xd4/0x124)
[ 0.294036] [<c0225bb0>] (omap3_l3_app_irq) from [<c00628dc>]
(handle_irq_event_percpu+0x54/0x164)
[ 0.294097] r7:00000000 r6:00000000 r5:cf89ec40 r4:cf89ec40
[ 0.294158] [<c0062888>] (handle_irq_event_percpu) from
[<c0062a44>] (handle_irq_event+0x58/0x8c)
[ 0.294219] r10:cf803200 r9:20000113 r8:0000000a r7:cf843ce0
r6:00000000 r5:cf89ec40
[ 0.294311] r4:cf8ed240
[ 0.294342] [<c00629ec>] (handle_irq_event) from [<c0065478>]
(handle_level_irq+0xdc/0x15c)
[ 0.294403] r5:00000000 r4:cf8ed240
[ 0.294464] [<c006539c>] (handle_level_irq) from [<c0062130>]
(generic_handle_irq+0x28/0x38)
[ 0.294494] r4:00000013 r3:c006539c
[ 0.294555] [<c0062108>] (generic_handle_irq) from [<c0062300>]
(__handle_domain_irq+0x68/0xc4)
[ 0.294616] r4:c07a9cf8 r3:00000103
[ 0.294677] [<c0062298>] (__handle_domain_irq) from [<c0008700>]
(omap_intc_handle_irq+0xbc/0xcc)
[ 0.294738] r10:60000113 r8:00000000 r7:c08d8700 r6:cf843ce0
r5:c07a9ed0 r4:0000000a
[ 0.294830] [<c0008644>] (omap_intc_handle_irq) from [<c0012280>]
(__irq_svc+0x40/0x74)
[ 0.294891] Exception stack(0xcf843ce0 to 0xcf843d28)
[ 0.294921] 3ce0: cf978600 c079fe88 00000001 00000000 cf978600
c079fe88 0000001c 00000000
[ 0.294982] 3d00: cf978634 20000113 60000113 cf843d54 cf843d28
cf843d28 c0063c50 c0063d2c
[ 0.295043] 3d20: 60000113 ffffffff
[ 0.295074] r8:cf978634 r7:cf843d14 r6:ffffffff r5:60000113
r4:c0063d2c r3:c0063c50
[ 0.295166] [<c0063990>] (__setup_irq) from [<c00640f0>]
(setup_irq+0x48/0x90)
[ 0.295227] r10:cf842000 r8:ffffffff r7:80000000 r6:c079fe88
r5:0000001c r4:cf978600
[ 0.295318] [<c00640a8>] (setup_irq) from [<c0031a98>]
(omap_system_dma_probe+0x214/0x2fc)
[ 0.295379] r6:0000001c r5:c07cb044 r4:00000020 r3:00000000
[ 0.295471] [<c0031884>] (omap_system_dma_probe) from [<c029aaac>]
(platform_drv_probe+0x50/0xac)
[ 0.295532] r10:cf842000 r9:00000000 r8:00000000 r7:c079fe44
r6:fffffdfb r5:cf985e10
[ 0.295593] r4:ffffffed
[ 0.295654] [<c029aa5c>] (platform_drv_probe) from [<c029934c>]
(driver_probe_device+0x10c/0x22c)
[ 0.295715] r7:c079fe44 r6:00000000 r5:cf985e10 r4:c08def30
[ 0.295776] [<c0299240>] (driver_probe_device) from [<c0299500>]
(__driver_attach+0x94/0x98)
[ 0.295837] r8:c07527f0 r7:00000000 r6:cf985e44 r5:c079fe44
r4:cf985e10 r3:00000000
[ 0.295928] [<c029946c>] (__driver_attach) from [<c02979c8>]
(bus_for_each_dev+0x5c/0x90)
[ 0.295989] r6:c029946c r5:c079fe44 r4:00000000 r3:00000000
[ 0.296081] [<c029796c>] (bus_for_each_dev) from [<c0298e48>]
(driver_attach+0x24/0x28)
[ 0.296112] r6:c07b0410 r5:cf881a80 r4:c079fe44
[ 0.296173] [<c0298e24>] (driver_attach) from [<c0298ac8>]
(bus_add_driver+0xdc/0x1d8)
[ 0.296264] [<c02989ec>] (bus_add_driver) from [<c0299bf0>]
(driver_register+0x80/0xfc)
[ 0.296295] r7:000000b8 r6:cf988580 r5:c0789be0 r4:c079fe44
[ 0.296386] [<c0299b70>] (driver_register) from [<c029a928>]
(__platform_driver_register+0x50/0x64)
[ 0.296447] r5:c0789be0 r4:c0789be0
[ 0.296508] [<c029a8d8>] (__platform_driver_register) from
[<c0752808>] (omap_system_dma_init+0x18/0x20)
[ 0.296569] [<c07527f0>] (omap_system_dma_init) from [<c0008998>]
(do_one_initcall+0x88/0x1cc)
[ 0.296661] [<c0008910>] (do_one_initcall) from [<c0744d94>]
(kernel_init_freeable+0xf0/0x1b8)
[ 0.296691] r10:c0773014 r9:c0772ffc r8:c07445ec r7:000000b8
r6:c07ca440 r5:00000003
[ 0.296783] r4:c077e570
[ 0.296844] [<c0744ca4>] (kernel_init_freeable) from [<c056b04c>]
(kernel_init+0x10/0xec)
[ 0.296874] r10:00000000 r9:00000000 r8:00000000 r7:00000000
r6:00000000 r5:c056b03c
[ 0.296966] r4:00000000
[ 0.296997] [<c056b03c>] (kernel_init) from [<c000ebd8>]
(ret_from_fork+0x14/0x3c)
[ 0.297058] r4:00000000 r3:00000000
[ 0.297149] ---[ end trace d174f22d07c1fabd ]---
[ 0.297241] Reserving DMA channels 0 and 1 for HS ROM code
[ 0.297302] OMAP DMA hardware revision 4.0
[ 0.445098] omap-dma-engine 48056000.dma-controller: OMAP DMA
engine driver
[ 0.452148] SCSI subsystem initialized
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next reply other threads:[~2014-12-12 13:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-12 13:55 Pavel Machek [this message]
2014-12-12 13:55 ` 3.19-rc0: video stops working after update Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141212135533.GA31299@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sre@debian.org \
--cc=sre@ring0.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.