* [lm-sensors] Collection of config files
@ 2014-12-17 10:21 Vojtech Pavlik
0 siblings, 0 replies; only message in thread
From: Vojtech Pavlik @ 2014-12-17 10:21 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 176 bytes --]
Hello,
I'm posting my collection of config files that I've created for a number
of machines I'm running. They may or may not be useful.
--
Vojtech Pavlik
Director SUSE Labs
[-- Attachment #2: sensors3-ASUS-K8N-E-Deluxe.conf --]
[-- Type: text/plain, Size: 675 bytes --]
chip "it8712-*"
label in0 "Vcore"
set in0_min 1.1 * 0.95
set in0_max 1.5 * 1.05
ignore in1
label in2 "+3.3V"
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
label in3 "+5V"
compute in3 @*1.68,@/1.68
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
label in4 "+12V"
compute in4 @*4,@/4
set in4_min 12 * 0.95
set in4_max 12 * 1.05
ignore in5
ignore in6
ignore in7
label in8 "Vbat"
label temp1 "CPU Temp"
label temp2 "MB Temp"
ignore temp3
label fan1 "CPU Fan"
set fan1_min 0
label fan2 "Sys Fan"
set fan2_min 0
ignore intrusion0
[-- Attachment #3: sensors3-ASUS-P9D-I.conf --]
[-- Type: text/plain, Size: 1256 bytes --]
chip "acpitz-virtual-*"
ignore temp1
ignore temp2
chip "nct6779-*"
label in0 "Vcore"
set in0_min 1.7 * 0.95
set in0_max 1.7 * 1.05
label in1 "+12V"
compute in1 @*12,@/12
set in1_min 12 * 0.95
set in1_max 12 * 1.05
label in2 "AVCC"
ignore in2
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
label in3 "+3.3V"
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
label in4 "+5V"
compute in4 @*5,@/5
set in4_min 5 * 0.95
set in4_max 5 * 1.05
ignore in5
ignore in6
label in7 "3Vsb"
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
label in8 "Vbat"
set in8_min 3.00
set in8_max 3.60
label in9 "Vtt"
set in9_min 0.89
set in9_max 1.74
ignore in10
ignore in11
label in12 "Vddq"
set in12_min 1.5 * 0.95
set in12_max 1.5 * 1.05
ignore in13
ignore in14
label fan1 "Rear Fan"
ignore fan1
label fan2 "CPU Fan"
set fan2_min 1000
label fan3 "Front Fan 1"
ignore fan3
label fan4 "Front Fan 2"
ignore fan4
label fan5 "Front Fan 3"
ignore fan5
label temp1 "MB Temp"
set temp1_max 70
set temp1_max_hyst 40
label temp2 "CPU Temp"
ignore temp3
ignore temp4
ignore temp5
ignore temp6
ignore temp7
ignore temp8
ignore temp9
ignore temp10
ignore intrusion0
ignore intrusion1
ignore beep_enable
[-- Attachment #4: sensors3-Fujitsu-Scenic-E600.conf --]
[-- Type: text/plain, Size: 307 bytes --]
# module fschmd
chip "fscher-*"
# Temperature
label temp1 "CPU Temp"
label temp2 "MB Temp"
ignore temp3
label fan1 "PS Fan"
label fan2 "CPU Fan"
ignore fan3
# Voltage
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
[-- Attachment #5: sensors3-GA-Z87MX-D3H.conf --]
[-- Type: text/plain, Size: 1734 bytes --]
chip "acpitz-virtual-0"
# ignore temp1 # stays always at 27.8 degrees C
# ignore temp2 # stays always at 29.8 degrees C
chip "it8728-*"
label in0 "Vtt" # Unused
ignore in0 # BIOS reports a reasonable voltage >1V, but
# this reading shows random values
# between 0V-1V, so something is wrong
label in1 "+3.3V" # looks correct
set in1_min 3.3 * 0.95
set in1_max 3.3 * 1.05
compute in1 @*1.649,@/1.649 # multiplier fits with other GA mainboards
label in2 "+12V" # verified
set in2_min 12 * 0.95
set in2_max 12 * 1.05
compute in2 @*6,@/6
label in3 "+5V" # verified
set in3_min 5 * 0.95
set in3_max 5 * 1.05
compute in3 @*2.5,@/2.5
label in4 "Vaxg" # Unused on Haswell, reports 0V
ignore in4 # BIOS also reports 0V
label in5 "Vcore" # Input to Haswell CPU VR (1.8V nominal)
set in5_min 1.8 * 0.95
set in5_max 1.8 * 1.05
label in6 "Vdram" # probably correct (1.5V nominal)
set in6_min 1.5 * 0.95
set in6_max 1.5 * 1.05
label in7 "+3Vsb" # defined by datasheet
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
label in8 "Vbat" # defined by datasheet
### fan
label fan1 "CPU1 fan"
label fan2 "Sys1 fan"
label fan3 "Sys2 fan"
label fan4 "Sys3 fan"
label fan5 "CPU2 fan" # called CPU OPT fan
### temperatures
label temp1 "System temp"
set temp1_min 10
set temp1_max 60
label temp2 "PCH temp"
set temp2_min 10
set temp2_max 60
label temp3 "CPU temp" # offset needed probably because of PECI reporting
set temp3_min 10 # a safe margin insteas of raw temperature
set temp3_max 85
compute temp3 @+12,@-12
ignore intrusion0
[-- Attachment #6: sensors3-Intel-D2500CC.conf --]
[-- Type: text/plain, Size: 1024 bytes --]
chip "w83627uhg-*"
label in0 "Vcore" # 0.91-1.21V VID range
set in0_min 0.85
set in0_max 1.25
label in1 "+3.3V"
set in1_min 3.3 * 0.95
set in1_max 3.3 * 1.05
compute in1 @*3.2,@/3.2
label in2 "AVcc"
set in2_min 5.0 * 0.95
set in2_max 5.0 * 1.05
ignore in2 # Tied to +5VSB anyway
label in3 "+5V"
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
label in4 "+12V"
set in4_min 12 * 0.95
set in4_max 12 * 1.05
compute in4 @*12,@/12
label in5 "Vdimm"
set in5_min 1.5 * 0.95
set in5_max 1.5 * 1.05
label in7 "+5Vsb"
set in7_min 5.0 * 0.95
set in7_max 5.0 * 1.05
label in8 "Vbat"
set in8_min 3.0
set in8_max 3.6
label temp1 "CPU temp"
set temp1_max 90
set temp1_max_hyst 75
label temp2 "MB temp"
set temp2_max 45
set temp2_max_hyst 30
label fan1 "Sys fan"
set fan1_min 300
ignore fan2 # Unused
label intrusion0 "Intrusion"
ignore intrusion0 # Untested
[-- Attachment #7: sensors3-Intel-D945GSEJT.conf --]
[-- Type: text/plain, Size: 1370 bytes --]
chip "coretemp-isa-*"
compute temp2 @+25,@-25 # Wrong Tj offset
chip "w83627dhg-*"
label in0 "Vcore"
set in0_min 0.85
set in0_max 1.30
label in1 "+5V"
compute in1 @*3.2,@/3.2
set in1_min 5*0.95
set in1_max 5*1.05
label in2 "AVcc"
set in2_min 3.3*0.95
set in2_max 3.3*1.05
ignore in2 # Tied to +3Vsb anyway
label in3 "+3Vcc"
set in3_min 3.3*0.95
set in3_max 3.3*1.05
ignore in3 # Tied to +3Vsb anyway
label in4 "+12V"
compute in4 @*6.6,@/6.6
set in4_min 12*0.95
set in4_max 12*1.05
label in5 "+3.3V"
compute in5 @*2.8,@/2.8
set in5_min 3.3*0.95
set in5_max 3.3*1.05
label in6 "+5Vsb"
compute in6 @*3.2,@/3.2
set in6_min 5*0.95
set in6_max 5*1.05
label in7 "+3.3Vsb"
set in7_min 3.3*0.95
set in7_max 3.3*1.05
label in8 "Vbat"
set in8_min 3.0
set in8_max 3.6
ignore fan1 # Unused
label fan2 "System fan"
set fan2_min 500
ignore fan3 # Unused
ignore fan4 # Unused
ignore fan5 # Unused
label temp1 "MB temp"
set temp1_max 45
set temp1_max_hyst 30
label temp2 "CPU temp"
set temp2_max 90
set temp2_max_hyst 75
ignore temp3 # Not connected
ignore cpu0_vid # Always says 0V
label intrusion0 "Intrusion"
ignore intrusion0 # Who connects that?
[-- Attachment #8: sensors3-Intel-DCP847SKE.conf --]
[-- Type: text/plain, Size: 1479 bytes --]
chip "nct6776-*"
label in0 "Vcore" # 0.80V @800MHz, 1.0V @1100MHz
set in1_min 0.75
set in1_max 1.05
label in1 "Vdimm" # 1.5V normal, 1.35V LV-DIMM
set in1_min 1.5 * 0.95
set in1_max 1.5 * 1.05
label in2 "AVcc" # Analog filtered voltage for
set in2_min 3.3 * 0.95 # superio sensor
set in2_max 3.3 * 1.05
ignore in2 # Tied to +3.3V anyway
label in3 "+3.3V"
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
label in4 "+5V"
compute in4 @*5,@/5
set in4_min 5 * 0.90 # Relaxed limits to 10%
set in4_max 5 * 1.10 # Voltage above otherwise
ignore in5 # Unused
label in6 "+12V" # Could be swapped with 5V
compute in6 @*12,@/12
set in6_min 12 * 0.95
set in6_max 12 * 1.05
label in7 "+3Vsb"
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
label in8 "Vbat" # Lithium battery volatge
set in8_min 3.0
set in8_max 3.6
ignore fan1 # Unused
label fan2 "CPU fan"
set fan2_min 1000
label temp1 "CPU temp"
set temp1_max 90
set temp1_max_hyst 75
ignore temp2 # Unused
label temp3 "Ambient" # Inlet air temperature
set temp3_max 45
set temp3_max_hyst 30
ignore temp4 # Unused
ignore temp5 # Unused
ignore temp6 # Unused
ignore temp7 # Unused
ignore temp8 # Unused
ignore temp9 # Unused
ignore temp10 # Unused
ignore intrusion0 # Untested
ignore intrusion1 # Untested
[-- Attachment #9: sensors3-Intel-DN2800MT.conf --]
[-- Type: text/plain, Size: 1305 bytes --]
chip "w83627dhg-*"
label in0 "Vcore"
set in0_min 0.75 * 0.99
set in0_max 1.21 * 1.01
label in1 "+12V"
compute in1 12*@, @/12
set in1_min 12 * 0.95
set in1_max 12 * 1.05
label in2 "AVcc"
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
ignore in2 # Tied to Vcc/3.3V
label in3 "+3.3V"
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
label in4 "+5V"
compute in4 5*@, @/5
set in4_min 5.0 * 0.95
set in4_max 5.0 * 1.05
label in5 "Vdimm"
set in5_min 1.5 * 0.95
set in5_max 1.5 * 1.05
label in6 "Vpch"
set in6_min 1.05 * 0.95
set in6_max 1.05 * 1.05
label in7 "+3Vsb"
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
label in8 "Vbat"
set in8_min 3.0
set in8_max 3.6
label temp1 "MB temp"
set temp1_max 80
set temp1_max_hyst 75
ignore temp2 # Always on 110.5 - unconnected
label temp3 "CPU temp"
set temp3_max 80
set temp3_max_hyst 75
label fan1 "PWM fan"
set fan1_min 0 # Passive design
label fan2 "System fan"
set fan2_min 0 # Passive design
ignore fan3 # Unconnected
ignore fan4 # Unconnected
ignore fan5 # Unconnected
ignore cpu0_vid # Always reports 0
ignore intrusion0
[-- Attachment #10: sensors3-PCEngines-ALIX2.conf --]
[-- Type: text/plain, Size: 100 bytes --]
# module scx200_acb
# module lm90
chip "lm86-*"
label temp1 "MB Temp"
label temp2 "CPU Temp"
[-- Attachment #11: sensors3-Supermicro-X7SPA-HF.conf --]
[-- Type: text/plain, Size: 1190 bytes --]
chip "w83627dhg-*"
label in0 "Vcore"
set in0_min 0.72
set in0_max 1.39
label in1 "Vich"
set in1_min 1.05 * 0.95
set in1_max 1.05 * 1.05
label in2 "AVcc" # Tied to 3Vcc
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
ignore in2
label in3 "+3.3V" # 3Vcc
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
label in4 "Vdimm"
set in4_min 1.5 * 0.95
set in4_max 1.5 * 1.05
label in5 "+5V"
compute in5 @*4,@/4
set in5_min 5 * 0.95
set in5_max 5 * 1.05
label in6 "+12V"
compute in6 @*6.625,@/6.625
set in6_min 12 * 0.95
set in6_max 12 * 1.05
label in7 "+3.3Vsb"
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
label in8 "Vbat"
set in8_min 3.0
set in8_max 3.6
label fan1 "CPU fan"
set fan1_min 0
label fan2 "Sys fan"
set fan2_min 0
ignore fan3
ignore fan4
ignore fan5
label temp1 "MB temp"
set temp1_max 60
set temp1_max_hyst 45
label temp2 "CPU temp"
set temp2_max 90
set temp2_max_hyst 75
label temp3 "Ambient"
set temp3_max 45
set temp3_max_hyst 30
ignore cpu0_vid # Reads always 0.0V
[-- Attachment #12: sensors3-Supermicro-X9SRH-7F.conf --]
[-- Type: text/plain, Size: 1091 bytes --]
chip "nct6776-*"
label in0 "Vcore"
set in0_min 0.55
set in0_max 1.50
label in1 "+12V"
compute in1 @*6.625,@/6.625
set in1_min 12 * 0.95
set in1_max 12 * 1.05
label in2 "AVCC"
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
ignore in2 # Tied to 3Vsb
label in3 "+3.3V"
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
label in4 "Vdimm"
set in4_min 1.5 * 0.95
set in4_max 1.5 * 1.05
label in5 "+5V"
compute in5 @*4,@/4
set in5_min 5 * 0.95
set in5_max 5 * 1.05
ignore in6 # Disabled
label in7 "3Vsb"
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
label in8 "Vbat"
set in8_min 3.0
set in8_max 3.6
ignore fan1
ignore fan2
label fan3 "Fan 1"
label fan4 "Fan 2"
ignore fan5
label temp1 "Peripheral temp"
set temp1_max 60
set temp1_max_hyst 45
label temp2 "System temp"
set temp2_max 60
set temp2_max_hyst 45
label temp3 "Ambient" # Maybe fixed
ignore temp4
ignore temp5
ignore temp6
ignore cpu0_vid
[-- Attachment #13: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-12-17 10:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-17 10:21 [lm-sensors] Collection of config files Vojtech Pavlik
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.