From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: lkp@lists.01.org
Subject: Re: [sb_edac] 50d1bb93672: EDAC sbridge: ECC is disabled. Aborting
Date: Thu, 18 Dec 2014 09:05:36 -0200 [thread overview]
Message-ID: <20141218090536.0d671dca@recife.lan> (raw)
In-Reply-To: <1418890406.26403.2.camel@intel.com>
[-- Attachment #1: Type: text/plain, Size: 3457 bytes --]
Hi Huang,
Em Thu, 18 Dec 2014 16:13:26 +0800
Huang Ying <ying.huang@intel.com> escreveu:
> FYI, we noticed the below changes on
>
> commit 50d1bb93672fa2f42cec6e06ce799fbe864f57e9 ("sb_edac: add support for Haswell based systems")
>
> Something new in kernel log. This may be expected. Just FYI.
>
> [ 12.490615] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
> [ 12.491031] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
> [ 12.491454] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
> [ 12.491865] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
> [ 12.492284] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
> [ 12.492698] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
> [ 12.493110] EDAC sbridge: Seeking for: PCI ID 8086:2f60
> [ 12.493528] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
> [ 12.493943] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
> [ 12.494359] EDAC sbridge: Seeking for: PCI ID 8086:2f71
> [ 12.494789] EDAC sbridge: Seeking for: PCI ID 8086:2f71
> [ 12.495206] EDAC sbridge: Seeking for: PCI ID 8086:2faa
> [ 12.495622] EDAC sbridge: Seeking for: PCI ID 8086:2faa
> [ 12.496040] EDAC sbridge: Seeking for: PCI ID 8086:2fab
> [ 12.496462] EDAC sbridge: Seeking for: PCI ID 8086:2fab
> [ 12.496878] EDAC sbridge: Seeking for: PCI ID 8086:2fac
> [ 12.497297] EDAC sbridge: Seeking for: PCI ID 8086:2fac
> [ 12.497714] EDAC sbridge: Seeking for: PCI ID 8086:2fad
> [ 12.497923] IOAPIC[0]: Set routing entry (8-22 -> 0xb3 -> IRQ 22 Mode:1 Active:1 Dest:1)
> [ 12.497927] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B3 Dest:00000001 SID:F0FF SQ:0 SVT:1)
> [ 12.497981] snd_hda_intel 0000:00:1b.0: irq 75 for MSI/MSI-X
> [ 12.498086] IOAPIC[1]: Set routing entry (9-12 -> 0xe3 -> IRQ 36 Mode:1 Active:1 Dest:1)
> [ 12.498089] IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:E3 Dest:00000001 SID:002C SQ:0 SVT:1)
> [ 12.498093] snd_hda_intel 0000:02:00.1: Disabling MSI
> [ 12.498109] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
> [ 12.502542] EDAC sbridge: Seeking for: PCI ID 8086:2fad
> [ 12.502956] EDAC sbridge: Seeking for: PCI ID 8086:2fbd
> [ 12.503365] EDAC sbridge: Seeking for: PCI ID 8086:2f68
> [ 12.503781] EDAC sbridge: Seeking for: PCI ID 8086:2f68
> [ 12.504197] EDAC sbridge: Seeking for: PCI ID 8086:2f79
> [ 12.504620] EDAC sbridge: Seeking for: PCI ID 8086:2f6a
> [ 12.505041] EDAC sbridge: Seeking for: PCI ID 8086:2f6b
> [ 12.505452] EDAC sbridge: Seeking for: PCI ID 8086:2f6c
> [ 12.505869] EDAC sbridge: Seeking for: PCI ID 8086:2f6d
> [ 12.506298] EDAC sbridge: ECC is disabled. Aborting
> [ 12.506718] EDAC sbridge: Couldn't find mci handler
Not sure about what are you complaining, since you didn't show how was
the log before.
>From the above, what looks weird, from EDAC driver PoV, is:
[ 12.506298] EDAC sbridge: ECC is disabled. Aborting
Does it used to work before? If so, was there any BIOS setting change?
Does the memories used on this machine have ECC?
Regards,
Mauro
>
>
> Disclaimer:
> Results have been estimated based on internal Intel analysis and are provided
> for informational purposes only. Any difference in system hardware or software
> design or configuration may affect actual performance.
>
>
> Thanks,
> Huang, Ying
>
WARNING: multiple messages have this Message-ID (diff)
From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: Huang Ying <ying.huang@intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>,
LKML <linux-kernel@vger.kernel.org>, LKP ML <lkp@01.org>
Subject: Re: [LKP] [sb_edac] 50d1bb93672: EDAC sbridge: ECC is disabled. Aborting
Date: Thu, 18 Dec 2014 09:05:36 -0200 [thread overview]
Message-ID: <20141218090536.0d671dca@recife.lan> (raw)
In-Reply-To: <1418890406.26403.2.camel@intel.com>
Hi Huang,
Em Thu, 18 Dec 2014 16:13:26 +0800
Huang Ying <ying.huang@intel.com> escreveu:
> FYI, we noticed the below changes on
>
> commit 50d1bb93672fa2f42cec6e06ce799fbe864f57e9 ("sb_edac: add support for Haswell based systems")
>
> Something new in kernel log. This may be expected. Just FYI.
>
> [ 12.490615] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
> [ 12.491031] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
> [ 12.491454] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
> [ 12.491865] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
> [ 12.492284] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
> [ 12.492698] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
> [ 12.493110] EDAC sbridge: Seeking for: PCI ID 8086:2f60
> [ 12.493528] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
> [ 12.493943] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
> [ 12.494359] EDAC sbridge: Seeking for: PCI ID 8086:2f71
> [ 12.494789] EDAC sbridge: Seeking for: PCI ID 8086:2f71
> [ 12.495206] EDAC sbridge: Seeking for: PCI ID 8086:2faa
> [ 12.495622] EDAC sbridge: Seeking for: PCI ID 8086:2faa
> [ 12.496040] EDAC sbridge: Seeking for: PCI ID 8086:2fab
> [ 12.496462] EDAC sbridge: Seeking for: PCI ID 8086:2fab
> [ 12.496878] EDAC sbridge: Seeking for: PCI ID 8086:2fac
> [ 12.497297] EDAC sbridge: Seeking for: PCI ID 8086:2fac
> [ 12.497714] EDAC sbridge: Seeking for: PCI ID 8086:2fad
> [ 12.497923] IOAPIC[0]: Set routing entry (8-22 -> 0xb3 -> IRQ 22 Mode:1 Active:1 Dest:1)
> [ 12.497927] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B3 Dest:00000001 SID:F0FF SQ:0 SVT:1)
> [ 12.497981] snd_hda_intel 0000:00:1b.0: irq 75 for MSI/MSI-X
> [ 12.498086] IOAPIC[1]: Set routing entry (9-12 -> 0xe3 -> IRQ 36 Mode:1 Active:1 Dest:1)
> [ 12.498089] IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:E3 Dest:00000001 SID:002C SQ:0 SVT:1)
> [ 12.498093] snd_hda_intel 0000:02:00.1: Disabling MSI
> [ 12.498109] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
> [ 12.502542] EDAC sbridge: Seeking for: PCI ID 8086:2fad
> [ 12.502956] EDAC sbridge: Seeking for: PCI ID 8086:2fbd
> [ 12.503365] EDAC sbridge: Seeking for: PCI ID 8086:2f68
> [ 12.503781] EDAC sbridge: Seeking for: PCI ID 8086:2f68
> [ 12.504197] EDAC sbridge: Seeking for: PCI ID 8086:2f79
> [ 12.504620] EDAC sbridge: Seeking for: PCI ID 8086:2f6a
> [ 12.505041] EDAC sbridge: Seeking for: PCI ID 8086:2f6b
> [ 12.505452] EDAC sbridge: Seeking for: PCI ID 8086:2f6c
> [ 12.505869] EDAC sbridge: Seeking for: PCI ID 8086:2f6d
> [ 12.506298] EDAC sbridge: ECC is disabled. Aborting
> [ 12.506718] EDAC sbridge: Couldn't find mci handler
Not sure about what are you complaining, since you didn't show how was
the log before.
>From the above, what looks weird, from EDAC driver PoV, is:
[ 12.506298] EDAC sbridge: ECC is disabled. Aborting
Does it used to work before? If so, was there any BIOS setting change?
Does the memories used on this machine have ECC?
Regards,
Mauro
>
>
> Disclaimer:
> Results have been estimated based on internal Intel analysis and are provided
> for informational purposes only. Any difference in system hardware or software
> design or configuration may affect actual performance.
>
>
> Thanks,
> Huang, Ying
>
next prev parent reply other threads:[~2014-12-18 11:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-18 8:13 [sb_edac] 50d1bb93672: EDAC sbridge: ECC is disabled. Aborting Huang Ying
2014-12-18 8:13 ` [LKP] " Huang Ying
2014-12-18 11:05 ` Mauro Carvalho Chehab [this message]
2014-12-18 11:05 ` Mauro Carvalho Chehab
2014-12-19 5:26 ` Huang Ying
2014-12-19 5:26 ` [LKP] " Huang Ying
2015-01-05 14:06 ` Aristeu Rozanski
2015-01-05 14:06 ` [LKP] " Aristeu Rozanski
2015-01-07 7:43 ` Huang Ying
2015-01-07 7:43 ` [LKP] " Huang Ying
2015-01-07 10:27 ` Mauro Carvalho Chehab
2015-01-07 10:27 ` [LKP] " Mauro Carvalho Chehab
2015-01-07 14:13 ` Aristeu Rozanski
2015-01-07 14:13 ` [LKP] " Aristeu Rozanski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141218090536.0d671dca@recife.lan \
--to=mchehab@osg.samsung.com \
--cc=lkp@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.