* [PATCH 0/5] ARM: am43xx: enable VPFE
@ 2014-12-18 16:24 ` Lad, Prabhakar
0 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Benoit Parrot <bparrot@ti.com>
This patch series adds hwmods and VPFE DT node entries
for am43xx devices.
The sensor driver is not allowed to release so the remote
endpoint for vpfe dt nodes are commented at the moment.
Benoit Parrot (4):
ARM: AM43xx: hwmod: add VPFE hwmod entries
ARM: dts: am4372: add VPFE DT node entries
ARM: dts: am43x-epos-evm: add VPFE device tree data
ARM: dts: am437x-gp-evm: add VPFE device tree data
Darren Etheridge (1):
ARM: dts: am437x-sk-evm: add VPFE device tree data
arch/arm/boot/dts/am4372.dtsi | 16 +++++
arch/arm/boot/dts/am437x-gp-evm.dts | 106 +++++++++++++++++++++++++++++
arch/arm/boot/dts/am437x-sk-evm.dts | 58 ++++++++++++++++
arch/arm/boot/dts/am43x-epos-evm.dts | 53 +++++++++++++++
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 +++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 3 +-
6 files changed, 291 insertions(+), 1 deletion(-)
--
1.9.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
2014-12-18 16:24 ` Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
-1 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
this patch adds VPFE HWMOD data for AM43xx.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 3 +-
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index fea01aa..bd9067e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -483,6 +483,44 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
},
};
+static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x104,
+ .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
+ .name = "vpfe",
+ .sysc = &am43xx_vpfe_sysc,
+};
+
+static struct omap_hwmod am43xx_vpfe0_hwmod = {
+ .name = "vpfe0",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
+ },
+ },
+};
+
+static struct omap_hwmod am43xx_vpfe1_hwmod = {
+ .name = "vpfe1",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am43xx_vpfe0_hwmod,
+ .clk = "l3_gclk",
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am43xx_vpfe1_hwmod,
+ .clk = "l3_gclk",
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__dss,
&am43xx_l4_ls__dss_dispc,
&am43xx_l4_ls__dss_rfbi,
+ &am43xx_l3__vpfe0,
+ &am43xx_l3__vpfe1,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index ad7b3e9..8aa4c2c 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -143,5 +143,6 @@
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
-
+#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
+#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
@ 2014-12-18 16:24 ` Lad, Prabhakar
0 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Benoit Parrot <bparrot@ti.com>
this patch adds VPFE HWMOD data for AM43xx.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 3 +-
2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index fea01aa..bd9067e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -483,6 +483,44 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
},
};
+static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x104,
+ .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
+ .name = "vpfe",
+ .sysc = &am43xx_vpfe_sysc,
+};
+
+static struct omap_hwmod am43xx_vpfe0_hwmod = {
+ .name = "vpfe0",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
+ },
+ },
+};
+
+static struct omap_hwmod am43xx_vpfe1_hwmod = {
+ .name = "vpfe1",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am43xx_vpfe0_hwmod,
+ .clk = "l3_gclk",
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am43xx_vpfe1_hwmod,
+ .clk = "l3_gclk",
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__dss,
&am43xx_l4_ls__dss_dispc,
&am43xx_l4_ls__dss_rfbi,
+ &am43xx_l3__vpfe0,
+ &am43xx_l3__vpfe1,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index ad7b3e9..8aa4c2c 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -143,5 +143,6 @@
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
-
+#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
+#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
2014-12-18 16:24 ` Lad, Prabhakar
@ 2015-01-08 0:01 ` Tony Lindgren
-1 siblings, 0 replies; 16+ messages in thread
From: Tony Lindgren @ 2015-01-08 0:01 UTC (permalink / raw)
To: Lad, Prabhakar, Paul Walmsley
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, devicetree, LAK, OMAP, LKML
* Lad, Prabhakar <prabhakar.csengg@gmail.com> [141218 08:27]:
> From: Benoit Parrot <bparrot@ti.com>
>
> this patch adds VPFE HWMOD data for AM43xx.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Darren Etheridge <detheridge@ti.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Paul probably wants to queue this, I'll pick the dts
changes.
Regards,
Tony
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 3 +-
> 2 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index fea01aa..bd9067e 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -483,6 +483,44 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
> },
> };
>
> +static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
> + .rev_offs = 0x0,
> + .sysc_offs = 0x104,
> + .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> + MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
> + .sysc_fields = &omap_hwmod_sysc_type2,
> +};
> +
> +static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
> + .name = "vpfe",
> + .sysc = &am43xx_vpfe_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_vpfe0_hwmod = {
> + .name = "vpfe0",
> + .class = &am43xx_vpfe_hwmod_class,
> + .clkdm_name = "l3s_clkdm",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> +static struct omap_hwmod am43xx_vpfe1_hwmod = {
> + .name = "vpfe1",
> + .class = &am43xx_vpfe_hwmod_class,
> + .clkdm_name = "l3s_clkdm",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe0_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe1_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__dss,
> &am43xx_l4_ls__dss_dispc,
> &am43xx_l4_ls__dss_rfbi,
> + &am43xx_l3__vpfe0,
> + &am43xx_l3__vpfe1,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index ad7b3e9..8aa4c2c 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -143,5 +143,6 @@
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
> -
> +#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
> +#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
> #endif
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
@ 2015-01-08 0:01 ` Tony Lindgren
0 siblings, 0 replies; 16+ messages in thread
From: Tony Lindgren @ 2015-01-08 0:01 UTC (permalink / raw)
To: linux-arm-kernel
* Lad, Prabhakar <prabhakar.csengg@gmail.com> [141218 08:27]:
> From: Benoit Parrot <bparrot@ti.com>
>
> this patch adds VPFE HWMOD data for AM43xx.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Darren Etheridge <detheridge@ti.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Paul probably wants to queue this, I'll pick the dts
changes.
Regards,
Tony
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 3 +-
> 2 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index fea01aa..bd9067e 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -483,6 +483,44 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
> },
> };
>
> +static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
> + .rev_offs = 0x0,
> + .sysc_offs = 0x104,
> + .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> + MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
> + .sysc_fields = &omap_hwmod_sysc_type2,
> +};
> +
> +static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
> + .name = "vpfe",
> + .sysc = &am43xx_vpfe_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_vpfe0_hwmod = {
> + .name = "vpfe0",
> + .class = &am43xx_vpfe_hwmod_class,
> + .clkdm_name = "l3s_clkdm",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> +static struct omap_hwmod am43xx_vpfe1_hwmod = {
> + .name = "vpfe1",
> + .class = &am43xx_vpfe_hwmod_class,
> + .clkdm_name = "l3s_clkdm",
> + .prcm = {
> + .omap4 = {
> + .modulemode = MODULEMODE_SWCTRL,
> + .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe0_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe1_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__dss,
> &am43xx_l4_ls__dss_dispc,
> &am43xx_l4_ls__dss_rfbi,
> + &am43xx_l3__vpfe0,
> + &am43xx_l3__vpfe1,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index ad7b3e9..8aa4c2c 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -143,5 +143,6 @@
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
> -
> +#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
> +#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
> #endif
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
2014-12-18 16:24 ` Lad, Prabhakar
@ 2015-01-20 7:18 ` Paul Walmsley
-1 siblings, 0 replies; 16+ messages in thread
From: Paul Walmsley @ 2015-01-20 7:18 UTC (permalink / raw)
To: Lad, Prabhakar, bparrot, detheridge, balbi
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP, LKML
Hi
On Thu, 18 Dec 2014, Lad, Prabhakar wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> this patch adds VPFE HWMOD data for AM43xx.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Darren Etheridge <detheridge@ti.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
...
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 3 +-
> 2 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index fea01aa..bd9067e 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
...
> @@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe0_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe1_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__dss,
> &am43xx_l4_ls__dss_dispc,
> &am43xx_l4_ls__dss_rfbi,
> + &am43xx_l3__vpfe0,
> + &am43xx_l3__vpfe1,
> NULL,
> };
According to SPRUHL7 Figure 14-1 "VPFE Integration" and Table 14-2 "VPFE
Connectivity Attributes", a VPFE has two interconnect ports per instance:
one L4-Per port as a register target, and one L3 port as a DMA initiator.
It's unclear to me whether the L3 port can also serve as a register
target, but Section 2.1 "ARM Cortex-A9 Memory Map", Table 4-1 "L3
Master-Slave Connectivity", and Figure 4-2 "L4 Topology" suggest that it
cannot.
So if that's correct, there should be two more struct omap_hwmod_ocp_if
records added in this patch for the register target ports that are
connected to the L4. DSS is a good example: see am43xx_dss__l3_main and
am43xx_l4_ls__dss in this same file.
- Paul
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH 1/5] ARM: AM43xx: hwmod: add VPFE hwmod entries
@ 2015-01-20 7:18 ` Paul Walmsley
0 siblings, 0 replies; 16+ messages in thread
From: Paul Walmsley @ 2015-01-20 7:18 UTC (permalink / raw)
To: linux-arm-kernel
Hi
On Thu, 18 Dec 2014, Lad, Prabhakar wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> this patch adds VPFE HWMOD data for AM43xx.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Darren Etheridge <detheridge@ti.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
...
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 56 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 3 +-
> 2 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index fea01aa..bd9067e 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
...
> @@ -750,6 +788,22 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe0_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
> + .master = &am33xx_l3_main_hwmod,
> + .slave = &am43xx_vpfe1_hwmod,
> + .clk = "l3_gclk",
> + .flags = OCPIF_SWSUP_IDLE,
> + .user = OCP_USER_MPU,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -848,6 +902,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__dss,
> &am43xx_l4_ls__dss_dispc,
> &am43xx_l4_ls__dss_rfbi,
> + &am43xx_l3__vpfe0,
> + &am43xx_l3__vpfe1,
> NULL,
> };
According to SPRUHL7 Figure 14-1 "VPFE Integration" and Table 14-2 "VPFE
Connectivity Attributes", a VPFE has two interconnect ports per instance:
one L4-Per port as a register target, and one L3 port as a DMA initiator.
It's unclear to me whether the L3 port can also serve as a register
target, but Section 2.1 "ARM Cortex-A9 Memory Map", Table 4-1 "L3
Master-Slave Connectivity", and Figure 4-2 "L4 Topology" suggest that it
cannot.
So if that's correct, there should be two more struct omap_hwmod_ocp_if
records added in this patch for the register target ports that are
connected to the L4. DSS is a good example: see am43xx_dss__l3_main and
am43xx_l4_ls__dss in this same file.
- Paul
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 2/5] ARM: dts: am4372: add VPFE DT node entries
2014-12-18 16:24 ` Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
-1 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
Add Video Processing Front End (VPFE) device tree
nodes for AM34xx family of devices.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am4372.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 46660ff..dbd52fd 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -896,6 +896,22 @@
compatible = "mmio-sram";
reg = <0x40300000 0x40000>; /* 256k */
};
+
+ vpfe0: vpfe@48326000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48326000 0x2000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe0";
+ status = "disabled";
+ };
+
+ vpfe1: vpfe@48328000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe1";
+ status = "disabled";
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/5] ARM: dts: am4372: add VPFE DT node entries
@ 2014-12-18 16:24 ` Lad, Prabhakar
0 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Benoit Parrot <bparrot@ti.com>
Add Video Processing Front End (VPFE) device tree
nodes for AM34xx family of devices.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am4372.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 46660ff..dbd52fd 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -896,6 +896,22 @@
compatible = "mmio-sram";
reg = <0x40300000 0x40000>; /* 256k */
};
+
+ vpfe0: vpfe at 48326000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48326000 0x2000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe0";
+ status = "disabled";
+ };
+
+ vpfe1: vpfe at 48328000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe1";
+ status = "disabled";
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/5] ARM: dts: am43x-epos-evm: add VPFE device tree data
2014-12-18 16:24 ` Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
-1 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am43x epos evm.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 53 ++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ac3e485..6a43801 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -243,6 +243,42 @@
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
+ 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
+ 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
+ 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
+ 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
+ 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
+ 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
+ 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
+ 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
+ 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
+ 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
};
matrix_keypad: matrix_keypad@0 {
@@ -626,3 +662,20 @@
};
};
};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 3/5] ARM: dts: am43x-epos-evm: add VPFE device tree data
@ 2014-12-18 16:24 ` Lad, Prabhakar
0 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Benoit Parrot <bparrot@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am43x epos evm.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 53 ++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ac3e485..6a43801 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -243,6 +243,42 @@
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
+ 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
+ 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
+ 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
+ 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
+ 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
+ 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
+ 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
+ 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
+ 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
+ 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
};
matrix_keypad: matrix_keypad at 0 {
@@ -626,3 +662,20 @@
};
};
};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/5] ARM: dts: am437x-sk-evm: add VPFE device tree data
2014-12-18 16:24 ` Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
-1 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Darren Etheridge <detheridge@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am437x sk evm.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 58 +++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 859ff3d..2f4898b 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -184,6 +184,46 @@
>;
};
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
+ 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
+ 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
+
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
@@ -611,3 +651,21 @@
&wdt {
status = "okay";
};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ /* Camera port */
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 4/5] ARM: dts: am437x-sk-evm: add VPFE device tree data
@ 2014-12-18 16:24 ` Lad, Prabhakar
0 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Darren Etheridge <detheridge@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am437x sk evm.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 58 +++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 859ff3d..2f4898b 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -184,6 +184,46 @@
>;
};
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
+ 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
+ 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
+
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
@@ -611,3 +651,21 @@
&wdt {
status = "okay";
};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ /* Camera port */
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 5/5] ARM: dts: am437x-gp-evm: add VPFE device tree data
2014-12-18 16:24 ` Lad, Prabhakar
@ 2014-12-18 16:24 ` Lad, Prabhakar
-1 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Tony Lindgren, devicetree, LAK, OMAP
Cc: LKML, Lad, Prabhakar
From: Benoit Parrot <bparrot@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am437x gp evm.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 106 ++++++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index e7ac47f..be2d285 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -254,6 +254,78 @@
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
+ 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
+ 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
+ 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
+ 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
+ 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
+ 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
+ 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
+ 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
+ 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
+ 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
+ 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
+ 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
+ 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
+ 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
+ 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
+ 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
+ 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
+ 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
+ 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
+ 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
+ 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
+ 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
+ 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
+ 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
+ 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
+ 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
+ >;
+ };
};
&i2c0 {
@@ -511,3 +583,37 @@
};
};
};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 5/5] ARM: dts: am437x-gp-evm: add VPFE device tree data
@ 2014-12-18 16:24 ` Lad, Prabhakar
0 siblings, 0 replies; 16+ messages in thread
From: Lad, Prabhakar @ 2014-12-18 16:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Benoit Parrot <bparrot@ti.com>
Add device tree nodes and pinmux entries for Video Processing
Front End (VPFE) on am437x gp evm.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 106 ++++++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index e7ac47f..be2d285 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -254,6 +254,78 @@
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
+ 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
+ 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
+ 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
+ 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
+ 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
+ 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
+ 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
+ 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
+ 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
+ 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
+ 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
+ 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
+ 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
+ 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
+ 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
+ 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
+ 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
+ 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
+ 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
+ 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
+ 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
+ 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
+ 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
+ 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
+ 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
+ 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
+ >;
+ };
};
&i2c0 {
@@ -511,3 +583,37 @@
};
};
};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread