From: Lukasz Majewski <l.majewski@samsung.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: Kamil Debski <k.debski@samsung.com>,
Jean Delvare <jdelvare@suse.de>,
Guenter Roeck <linux@roeck-us.net>,
lm-sensors@lm-sensors.org,
Linux PM list <linux-pm@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
devicetree@vger.kernel.org,
Lukasz Majewski <l.majewski@majess.pl>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
Abhilash Kesavan <a.kesavan@samsung.com>
Subject: Re: [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function
Date: Wed, 14 Jan 2015 16:01:06 +0100 [thread overview]
Message-ID: <20150114160106.20aa160b@amdc2363> (raw)
In-Reply-To: <20150102190339.GA22356@developer>
Hi Eduardo,
> On Fri, Jan 02, 2015 at 02:54:28PM -0400, Eduardo Valentin wrote:
> > On Mon, Dec 22, 2014 at 05:27:41PM +0100, Lukasz Majewski wrote:
> > > Odroid U3 fan can work without being registered as OF cooling
> > > device (with CONFIG_THERMAL_OF disabled).
> > > In this situation it can be controlled via PWM entry at
> > > /sys/class/hwmon/hwmon0/pwm1.
> > >
> > > Therefore, the thermal_of_cooling_device_register() function
> > > needs a stub to allow clean compilation.
> > >
> > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> >
> > Acked-by: Eduardo Valentin <edubezval@gmail.com>
>
> Sorry, too fast,
>
> This is actually
> Nacked-by: Eduardo Valentin <edubezval@gmail.com>
>
> :-)
>
> I get this error:
> drivers/thermal/thermal_core.c:1210:1: error: redefinition of
> ‘thermal_of_cooling_device_register’
> thermal_of_cooling_device_register(struct device_node *np,
> ^
> In file included from drivers/thermal/thermal_core.c:34:0:
> include/linux/thermal.h:321:1: note: previous definition of
> ‘thermal_of_cooling_device_register’ was here
> thermal_of_cooling_device_register(struct device_node *np,
> ^
>
>
> We provide the function in thermal core even if CONFIG_THERMAL_OF is
> not set.
Unfortunately the PWM fan subsystem can work perfectly fine without
CONFIG_THERMAL.
I think that it would be enough to make something like this in
the ./include/linux/thermal.h:
#ifdef CONFIG_THERMAL
static inline struct thermal_cooling_device *
thermal_of_cooling_device_register(struct device_node
*np, char *type, void *devdata,
const struct
thermal_cooling_device_ops *ops) {
return NULL;
}
#else
[ already present declaration of
thermal_of_cooling_device_register() ]
#endif /* CONFIG_THERMAL */
> >
> > > ---
> > > Changes for v2:
> > > - None
> > > ---
> > > include/linux/thermal.h | 14 +++++++++++---
> > > 1 file changed, 11 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> > > index 2de3d9e..871123c 100644
> > > --- a/include/linux/thermal.h
> > > +++ b/include/linux/thermal.h
> > > @@ -328,6 +328,10 @@ thermal_zone_of_sensor_register(struct
> > > device *dev, int id, void *data, const struct
> > > thermal_zone_of_device_ops *ops); void
> > > thermal_zone_of_sensor_unregister(struct device *dev, struct
> > > thermal_zone_device *tz); +struct thermal_cooling_device *
> > > +thermal_of_cooling_device_register(struct device_node *np,
> > > + char *type, void *devdata,
> > > + const struct
> > > thermal_cooling_device_ops *); #else
> > > static inline struct thermal_zone_device *
> > > thermal_zone_of_sensor_register(struct device *dev, int id, void
> > > *data, @@ -342,6 +346,13 @@ void
> > > thermal_zone_of_sensor_unregister(struct device *dev, {
> > > }
> > >
> > > +static inline struct thermal_cooling_device *
> > > +thermal_of_cooling_device_register(struct device_node *np,
> > > + char *type, void *devdata,
> > > + const struct
> > > thermal_cooling_device_ops *ops) +{
> > > + return NULL;
> > > +}
> > > #endif
> > > struct thermal_zone_device *thermal_zone_device_register(const
> > > char *, int, int, void *, struct thermal_zone_device_ops *,
> > > @@ -357,9 +368,6 @@ void thermal_zone_device_update(struct
> > > thermal_zone_device *);
> > > struct thermal_cooling_device
> > > *thermal_cooling_device_register(char *, void *, const struct
> > > thermal_cooling_device_ops *); -struct thermal_cooling_device *
> > > -thermal_of_cooling_device_register(struct device_node *np, char
> > > *, void *,
> > > - const struct
> > > thermal_cooling_device_ops *); void
> > > thermal_cooling_device_unregister(struct thermal_cooling_device
> > > *); struct thermal_zone_device
> > > *thermal_zone_get_zone_by_name(const char *name); int
> > > thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned
> > > long *temp); -- 2.0.0.rc2
> > >
>
>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
WARNING: multiple messages have this Message-ID (diff)
From: Lukasz Majewski <l.majewski@samsung.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: Kamil Debski <k.debski@samsung.com>,
Jean Delvare <jdelvare@suse.de>,
Guenter Roeck <linux@roeck-us.net>,
lm-sensors@lm-sensors.org,
Linux PM list <linux-pm@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
devicetree@vger.kernel.org,
Lukasz Majewski <l.majewski@majess.pl>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
Abhilash Kesavan <a.kesavan@samsung.com>
Subject: Re: [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct
Date: Wed, 14 Jan 2015 15:01:06 +0000 [thread overview]
Message-ID: <20150114160106.20aa160b@amdc2363> (raw)
In-Reply-To: <20150102190339.GA22356@developer>
SGkgRWR1YXJkbywKCj4gT24gRnJpLCBKYW4gMDIsIDIwMTUgYXQgMDI6NTQ6MjhQTSAtMDQwMCwg
RWR1YXJkbyBWYWxlbnRpbiB3cm90ZToKPiA+IE9uIE1vbiwgRGVjIDIyLCAyMDE0IGF0IDA1OjI3
OjQxUE0gKzAxMDAsIEx1a2FzeiBNYWpld3NraSB3cm90ZToKPiA+ID4gT2Ryb2lkIFUzIGZhbiBj
YW4gd29yayB3aXRob3V0IGJlaW5nIHJlZ2lzdGVyZWQgYXMgT0YgY29vbGluZwo+ID4gPiBkZXZp
Y2UgKHdpdGggQ09ORklHX1RIRVJNQUxfT0YgZGlzYWJsZWQpLgo+ID4gPiBJbiB0aGlzIHNpdHVh
dGlvbiBpdCBjYW4gYmUgY29udHJvbGxlZCB2aWEgUFdNIGVudHJ5IGF0Cj4gPiA+IC9zeXMvY2xh
c3MvaHdtb24vaHdtb24wL3B3bTEuCj4gPiA+IAo+ID4gPiBUaGVyZWZvcmUsIHRoZSB0aGVybWFs
X29mX2Nvb2xpbmdfZGV2aWNlX3JlZ2lzdGVyKCkgZnVuY3Rpb24KPiA+ID4gbmVlZHMgYSBzdHVi
IHRvIGFsbG93IGNsZWFuIGNvbXBpbGF0aW9uLgo+ID4gPiAKPiA+ID4gU2lnbmVkLW9mZi1ieTog
THVrYXN6IE1hamV3c2tpIDxsLm1hamV3c2tpQHNhbXN1bmcuY29tPgo+ID4gCj4gPiBBY2tlZC1i
eTogRWR1YXJkbyBWYWxlbnRpbiA8ZWR1YmV6dmFsQGdtYWlsLmNvbT4KPiAKPiBTb3JyeSwgdG9v
IGZhc3QsCj4gCj4gVGhpcyBpcyBhY3R1YWxseQo+IE5hY2tlZC1ieTogRWR1YXJkbyBWYWxlbnRp
biA8ZWR1YmV6dmFsQGdtYWlsLmNvbT4KPiAKPiA6LSkKPiAKPiBJIGdldCB0aGlzIGVycm9yOgo+
IGRyaXZlcnMvdGhlcm1hbC90aGVybWFsX2NvcmUuYzoxMjEwOjE6IGVycm9yOiByZWRlZmluaXRp
b24gb2YKPiDigJh0aGVybWFsX29mX2Nvb2xpbmdfZGV2aWNlX3JlZ2lzdGVy4oCZCj4gIHRoZXJt
YWxfb2ZfY29vbGluZ19kZXZpY2VfcmVnaXN0ZXIoc3RydWN0IGRldmljZV9ub2RlICpucCwKPiAg
IF4KPiAgIEluIGZpbGUgaW5jbHVkZWQgZnJvbSBkcml2ZXJzL3RoZXJtYWwvdGhlcm1hbF9jb3Jl
LmM6MzQ6MDoKPiAgIGluY2x1ZGUvbGludXgvdGhlcm1hbC5oOjMyMToxOiBub3RlOiBwcmV2aW91
cyBkZWZpbml0aW9uIG9mCj4gICDigJh0aGVybWFsX29mX2Nvb2xpbmdfZGV2aWNlX3JlZ2lzdGVy
4oCZIHdhcyBoZXJlCj4gICAgdGhlcm1hbF9vZl9jb29saW5nX2RldmljZV9yZWdpc3RlcihzdHJ1
Y3QgZGV2aWNlX25vZGUgKm5wLAo+ICAgICBeCj4gCj4gCj4gV2UgcHJvdmlkZSB0aGUgZnVuY3Rp
b24gaW4gdGhlcm1hbCBjb3JlIGV2ZW4gaWYgQ09ORklHX1RIRVJNQUxfT0YgaXMKPiBub3Qgc2V0
LgoKVW5mb3J0dW5hdGVseSB0aGUgUFdNIGZhbiBzdWJzeXN0ZW0gY2FuIHdvcmsgcGVyZmVjdGx5
IGZpbmUgd2l0aG91dApDT05GSUdfVEhFUk1BTC4KCkkgdGhpbmsgdGhhdCBpdCB3b3VsZCBiZSBl
bm91Z2ggdG8gbWFrZSBzb21ldGhpbmcgbGlrZSB0aGlzIGluCnRoZSAuL2luY2x1ZGUvbGludXgv
dGhlcm1hbC5oOgoKI2lmZGVmIENPTkZJR19USEVSTUFMCglzdGF0aWMgaW5saW5lIHN0cnVjdCB0
aGVybWFsX2Nvb2xpbmdfZGV2aWNlICoKCQl0aGVybWFsX29mX2Nvb2xpbmdfZGV2aWNlX3JlZ2lz
dGVyKHN0cnVjdCBkZXZpY2Vfbm9kZQoJCSpucCwgY2hhciAqdHlwZSwgdm9pZCAqZGV2ZGF0YSwK
CQkJCSAgIGNvbnN0IHN0cnVjdAoJCXRoZXJtYWxfY29vbGluZ19kZXZpY2Vfb3BzICpvcHMpIHsK
CQlyZXR1cm4gTlVMTDsKCX0KI2Vsc2UKCVsgYWxyZWFkeSBwcmVzZW50IGRlY2xhcmF0aW9uIG9m
Cgl0aGVybWFsX29mX2Nvb2xpbmdfZGV2aWNlX3JlZ2lzdGVyKCkgXQojZW5kaWYgLyogQ09ORklH
X1RIRVJNQUwgKi8KCgoKPiA+IAo+ID4gPiAtLS0KPiA+ID4gQ2hhbmdlcyBmb3IgdjI6Cj4gPiA+
IC0gTm9uZQo+ID4gPiAtLS0KPiA+ID4gIGluY2x1ZGUvbGludXgvdGhlcm1hbC5oIHwgMTQgKysr
KysrKysrKystLS0KPiA+ID4gIDEgZmlsZSBjaGFuZ2VkLCAxMSBpbnNlcnRpb25zKCspLCAzIGRl
bGV0aW9ucygtKQo+ID4gPiAKPiA+ID4gZGlmZiAtLWdpdCBhL2luY2x1ZGUvbGludXgvdGhlcm1h
bC5oIGIvaW5jbHVkZS9saW51eC90aGVybWFsLmgKPiA+ID4gaW5kZXggMmRlM2Q5ZS4uODcxMTIz
YyAxMDA2NDQKPiA+ID4gLS0tIGEvaW5jbHVkZS9saW51eC90aGVybWFsLmgKPiA+ID4gKysrIGIv
aW5jbHVkZS9saW51eC90aGVybWFsLmgKPiA+ID4gQEAgLTMyOCw2ICszMjgsMTAgQEAgdGhlcm1h
bF96b25lX29mX3NlbnNvcl9yZWdpc3RlcihzdHJ1Y3QKPiA+ID4gZGV2aWNlICpkZXYsIGludCBp
ZCwgdm9pZCAqZGF0YSwgY29uc3Qgc3RydWN0Cj4gPiA+IHRoZXJtYWxfem9uZV9vZl9kZXZpY2Vf
b3BzICpvcHMpOyB2b2lkCj4gPiA+IHRoZXJtYWxfem9uZV9vZl9zZW5zb3JfdW5yZWdpc3Rlcihz
dHJ1Y3QgZGV2aWNlICpkZXYsIHN0cnVjdAo+ID4gPiB0aGVybWFsX3pvbmVfZGV2aWNlICp0eik7
ICtzdHJ1Y3QgdGhlcm1hbF9jb29saW5nX2RldmljZSAqCj4gPiA+ICt0aGVybWFsX29mX2Nvb2xp
bmdfZGV2aWNlX3JlZ2lzdGVyKHN0cnVjdCBkZXZpY2Vfbm9kZSAqbnAsCj4gPiA+ICsJCQkJICAg
Y2hhciAqdHlwZSwgdm9pZCAqZGV2ZGF0YSwKPiA+ID4gKwkJCQkgICBjb25zdCBzdHJ1Y3QKPiA+
ID4gdGhlcm1hbF9jb29saW5nX2RldmljZV9vcHMgKik7ICNlbHNlCj4gPiA+ICBzdGF0aWMgaW5s
aW5lIHN0cnVjdCB0aGVybWFsX3pvbmVfZGV2aWNlICoKPiA+ID4gIHRoZXJtYWxfem9uZV9vZl9z
ZW5zb3JfcmVnaXN0ZXIoc3RydWN0IGRldmljZSAqZGV2LCBpbnQgaWQsIHZvaWQKPiA+ID4gKmRh
dGEsIEBAIC0zNDIsNiArMzQ2LDEzIEBAIHZvaWQKPiA+ID4gdGhlcm1hbF96b25lX29mX3NlbnNv
cl91bnJlZ2lzdGVyKHN0cnVjdCBkZXZpY2UgKmRldiwgewo+ID4gPiAgfQo+ID4gPiAgCj4gPiA+
ICtzdGF0aWMgaW5saW5lIHN0cnVjdCB0aGVybWFsX2Nvb2xpbmdfZGV2aWNlICoKPiA+ID4gK3Ro
ZXJtYWxfb2ZfY29vbGluZ19kZXZpY2VfcmVnaXN0ZXIoc3RydWN0IGRldmljZV9ub2RlICpucCwK
PiA+ID4gKwkJCQkgICBjaGFyICp0eXBlLCB2b2lkICpkZXZkYXRhLAo+ID4gPiArCQkJCSAgIGNv
bnN0IHN0cnVjdAo+ID4gPiB0aGVybWFsX2Nvb2xpbmdfZGV2aWNlX29wcyAqb3BzKSArewo+ID4g
PiArCXJldHVybiBOVUxMOwo+ID4gPiArfQo+ID4gPiAgI2VuZGlmCj4gPiA+ICBzdHJ1Y3QgdGhl
cm1hbF96b25lX2RldmljZSAqdGhlcm1hbF96b25lX2RldmljZV9yZWdpc3Rlcihjb25zdAo+ID4g
PiBjaGFyICosIGludCwgaW50LCB2b2lkICosIHN0cnVjdCB0aGVybWFsX3pvbmVfZGV2aWNlX29w
cyAqLAo+ID4gPiBAQCAtMzU3LDkgKzM2OCw2IEBAIHZvaWQgdGhlcm1hbF96b25lX2RldmljZV91
cGRhdGUoc3RydWN0Cj4gPiA+IHRoZXJtYWxfem9uZV9kZXZpY2UgKik7IAo+ID4gPiAgc3RydWN0
IHRoZXJtYWxfY29vbGluZ19kZXZpY2UKPiA+ID4gKnRoZXJtYWxfY29vbGluZ19kZXZpY2VfcmVn
aXN0ZXIoY2hhciAqLCB2b2lkICosIGNvbnN0IHN0cnVjdAo+ID4gPiB0aGVybWFsX2Nvb2xpbmdf
ZGV2aWNlX29wcyAqKTsgLXN0cnVjdCB0aGVybWFsX2Nvb2xpbmdfZGV2aWNlICoKPiA+ID4gLXRo
ZXJtYWxfb2ZfY29vbGluZ19kZXZpY2VfcmVnaXN0ZXIoc3RydWN0IGRldmljZV9ub2RlICpucCwg
Y2hhcgo+ID4gPiAqLCB2b2lkICosCj4gPiA+IC0JCQkJICAgY29uc3Qgc3RydWN0Cj4gPiA+IHRo
ZXJtYWxfY29vbGluZ19kZXZpY2Vfb3BzICopOyB2b2lkCj4gPiA+IHRoZXJtYWxfY29vbGluZ19k
ZXZpY2VfdW5yZWdpc3RlcihzdHJ1Y3QgdGhlcm1hbF9jb29saW5nX2RldmljZQo+ID4gPiAqKTsg
c3RydWN0IHRoZXJtYWxfem9uZV9kZXZpY2UKPiA+ID4gKnRoZXJtYWxfem9uZV9nZXRfem9uZV9i
eV9uYW1lKGNvbnN0IGNoYXIgKm5hbWUpOyBpbnQKPiA+ID4gdGhlcm1hbF96b25lX2dldF90ZW1w
KHN0cnVjdCB0aGVybWFsX3pvbmVfZGV2aWNlICp0eiwgdW5zaWduZWQKPiA+ID4gbG9uZyAqdGVt
cCk7IC0tIDIuMC4wLnJjMgo+ID4gPiAKPiAKPiAKCgoKLS0gCkJlc3QgcmVnYXJkcywKCkx1a2Fz
eiBNYWpld3NraQoKU2Ftc3VuZyBSJkQgSW5zdGl0dXRlIFBvbGFuZCAoU1JQT0wpIHwgTGludXgg
UGxhdGZvcm0gR3JvdXAKCl9fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19f
X19fX19fCmxtLXNlbnNvcnMgbWFpbGluZyBsaXN0CmxtLXNlbnNvcnNAbG0tc2Vuc29ycy5vcmcK
aHR0cDovL2xpc3RzLmxtLXNlbnNvcnMub3JnL21haWxtYW4vbGlzdGluZm8vbG0tc2Vuc29ycw=
next prev parent reply other threads:[~2015-01-14 15:01 UTC|newest]
Thread overview: 229+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-18 10:13 [PATCH 0/9] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` [PATCH 1/9] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling dev Lukasz Majewski
2014-12-18 10:42 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Sjoerd Simons
2014-12-18 10:42 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Sjoerd Simons
2014-12-19 15:32 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-19 15:32 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2014-12-19 16:02 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Guenter Roeck
2014-12-19 16:02 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Guenter Roeck
2014-12-19 16:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-19 16:13 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2015-01-05 10:50 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Sjoerd Simons
2015-01-05 10:50 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Sjoerd Simons
[not found] ` <1420455034.15910.53.camel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2015-01-14 13:56 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-01-14 13:56 ` Lukasz Majewski
2015-01-14 13:56 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2015-01-15 8:57 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Sjoerd Simons
2015-01-15 8:57 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Sjoerd Simons
2014-12-18 14:27 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Guenter Roeck
2014-12-18 14:27 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Guenter Roeck
[not found] ` <5492E46C.3080100-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-12-19 16:25 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-19 16:25 ` Lukasz Majewski
2014-12-19 16:25 ` [lm-sensors] [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2014-12-18 10:13 ` [PATCH 3/9] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling devi Lukasz Majewski
2014-12-18 10:13 ` [PATCH 5/9] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` [PATCH 6/9] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` [PATCH 7/9] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` [PATCH 8/9] hwmon: thermal: Provide 'default-pulse-width' property to setup FAN on boot Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-18 10:13 ` [PATCH 9/9] hwmon: thermal: dts: Disable FAN on boot on the Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2015-01-02 18:54 ` Eduardo Valentin
2015-01-02 18:54 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-01-02 19:03 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Eduardo Valentin
2015-01-02 19:03 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-01-14 15:01 ` Lukasz Majewski [this message]
2015-01-14 15:01 ` Lukasz Majewski
2015-01-14 18:32 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Eduardo Valentin
2015-01-14 18:32 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-01-15 8:43 ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-01-15 8:43 ` [lm-sensors] [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
[not found] ` <1419265668-32283-3-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-01-02 18:40 ` Eduardo Valentin
2015-01-02 18:40 ` Eduardo Valentin
2015-01-02 18:40 ` [lm-sensors] " Eduardo Valentin
2015-01-14 15:07 ` Lukasz Majewski
2015-01-14 15:07 ` Lukasz Majewski
2015-01-14 15:07 ` [lm-sensors] " Lukasz Majewski
2015-01-14 18:28 ` Eduardo Valentin
2015-01-14 18:28 ` [lm-sensors] " Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling Lukasz Majewski
2015-01-02 18:51 ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Eduardo Valentin
2015-01-02 18:51 ` [lm-sensors] [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cool Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling d Lukasz Majewski
2015-01-02 18:52 ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2015-01-02 18:52 ` [lm-sensors] [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooli Eduardo Valentin
2014-12-22 16:27 ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2014-12-29 12:52 ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Guenter Roeck
2014-12-29 12:52 ` [lm-sensors] [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 7/8] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
2014-12-29 12:50 ` Guenter Roeck
2014-12-29 12:50 ` [lm-sensors] " Guenter Roeck
2014-12-22 16:27 ` [PATCH v2 8/8] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2014-12-22 16:27 ` [lm-sensors] " Lukasz Majewski
[not found] ` <1418897591-18332-1-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06 16:59 ` [PATCH v3 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-06 18:27 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Guenter Roeck
2015-02-06 18:27 ` [lm-sensors] [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty Guenter Roeck
2015-02-08 20:52 ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-08 20:52 ` [lm-sensors] [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty Lukasz Majewski
[not found] ` <1423241948-31981-1-git-send-email-l.majewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06 16:59 ` [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-06 16:59 ` Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-06 18:36 ` Guenter Roeck
2015-02-06 18:36 ` [lm-sensors] " Guenter Roeck
2015-02-08 21:36 ` Lukasz Majewski
2015-02-08 21:36 ` [lm-sensors] " Lukasz Majewski
2015-02-09 4:40 ` Guenter Roeck
2015-02-09 4:40 ` [lm-sensors] " Guenter Roeck
2015-02-06 16:59 ` [PATCH v3 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-24 19:21 ` [lm-sensors] [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Eduardo Valentin
2015-02-25 12:26 ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-25 12:26 ` [lm-sensors] [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() funct Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-24 19:21 ` Eduardo Valentin
2015-02-24 19:21 ` [lm-sensors] " Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-24 19:25 ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Eduardo Valentin
2015-02-24 19:25 ` [lm-sensors] [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FA Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-18 13:16 ` Andreas Färber
2015-02-18 13:16 ` [lm-sensors] " Andreas Färber
2015-02-18 10:07 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-24 19:37 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2015-02-24 19:37 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device i Eduardo Valentin
2015-02-25 13:28 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 13:28 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device i Lukasz Majewski
2015-02-25 18:30 ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2015-02-25 18:30 ` [lm-sensors] [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device i Eduardo Valentin
2015-02-18 10:07 ` [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-21 0:26 ` Guenter Roeck
2015-02-21 0:26 ` [lm-sensors] " Guenter Roeck
2015-02-23 16:13 ` Lukasz Majewski
2015-02-23 16:13 ` [lm-sensors] " Lukasz Majewski
2015-02-23 16:23 ` Guenter Roeck
2015-02-23 16:23 ` [lm-sensors] " Guenter Roeck
2015-02-23 16:51 ` Lukasz Majewski
2015-02-23 16:51 ` [lm-sensors] " Lukasz Majewski
2015-02-23 16:59 ` Guenter Roeck
2015-02-23 16:59 ` [lm-sensors] " Guenter Roeck
2015-02-18 10:07 ` [PATCH v4 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-18 10:07 ` [lm-sensors] " Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] " Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-25 19:11 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Eduardo Valentin
2015-02-25 19:11 ` [lm-sensors] [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FA Eduardo Valentin
2015-02-25 19:13 ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Eduardo Valentin
2015-02-25 19:13 ` [lm-sensors] [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FA Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] " Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-25 18:49 ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Eduardo Valentin
2015-02-25 18:49 ` [lm-sensors] [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device i Eduardo Valentin
2015-02-25 15:34 ` [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] " Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 15:34 ` [lm-sensors] " Lukasz Majewski
2015-02-25 18:24 ` Eduardo Valentin
2015-02-25 18:24 ` [lm-sensors] " Eduardo Valentin
2015-02-25 17:18 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Guenter Roeck
2015-02-25 17:18 ` [lm-sensors] " Guenter Roeck
2015-02-25 18:29 ` Eduardo Valentin
2015-02-25 18:29 ` [lm-sensors] " Eduardo Valentin
2015-02-25 18:42 ` Guenter Roeck
2015-02-25 18:42 ` [lm-sensors] " Guenter Roeck
2015-02-26 13:59 ` [PATCH v6 " Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Od Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cyc Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 13:59 ` [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59 ` [lm-sensors] " Lukasz Majewski
2015-02-26 14:12 ` Guenter Roeck
2015-02-26 14:12 ` [lm-sensors] " Guenter Roeck
2015-02-26 14:40 ` Lukasz Majewski
2015-02-26 14:40 ` [lm-sensors] " Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 f Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] " Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling devic Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM d Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] " Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03 ` [lm-sensors] " Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-08-11 13:07 ` [PATCH RESEND v6 1/3] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-08-13 0:17 ` Krzysztof Kozlowski
2015-08-14 9:36 ` Kukjin Kim
2015-08-16 9:35 ` Krzysztof Kozlowski
2015-09-16 11:00 ` [PATCH RESEND v6 0/3] dts: thermal: Odroid U3: Provide support for Odroid U3 fan Thomas Pietrowski
2015-09-16 11:57 ` Krzysztof Kozlowski
2015-08-11 13:14 ` [PATCH RESEND v6 2/3] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
2015-08-11 13:15 ` [PATCH RESEND v6 3/3] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-08-13 0:35 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150114160106.20aa160b@amdc2363 \
--to=l.majewski@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=jdelvare@suse.de \
--cc=k.debski@samsung.com \
--cc=kesavan.abhilash@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=l.majewski@majess.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.