From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Aida Mynzhasova <aida.mynzhasova@skitlab.ru>,
Brian Hutchinson <b.hutchman@gmail.com>,
Paul Walmsley <paul@pwsan.com>
Subject: Re: [PATCH 2/2] ARM: OMAP2+: Add dm816x hwmod support
Date: Wed, 14 Jan 2015 11:43:01 -0800 [thread overview]
Message-ID: <20150114194301.GR2419@atomide.com> (raw)
In-Reply-To: <1421191355-12835-3-git-send-email-tony@atomide.com>
* Tony Lindgren <tony@atomide.com> [150113 15:29]:
> Add minimal hwmod support that works at least on dm8168. This
> is based on the code in the earlier TI CDP tree, and an earlier
> patch by Aida Mynzhasova <aida.mynzhasova@skitlab.ru>.
>
> I've set up things to work pretty much the same way as for
> am33xx. We are basically using cm33xx.c with a different set
> of clocks and clockdomains.
>
> This code is based on the TI81XX-LINUX-PSP-04.04.00.02 patches
> published at:
>
> http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html
>
> Cc: Aida Mynzhasova <aida.mynzhasova@skitlab.ru>
> Cc: Brian Hutchinson <b.hutchman@gmail.com>
> Cc: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/mach-omap2/Makefile | 1 +
> arch/arm/mach-omap2/io.c | 8 +-
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/omap_hwmod.h | 1 +
> arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1025 ++++++++++++++++++++++++++++
> 5 files changed, 1034 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/mach-omap2/omap_hwmod_81xx_data.c
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 352873c..926bc39 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -226,6 +226,7 @@ obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_ipblock_data.o
> obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_43xx_data.o
> obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_interconnect_data.o
> obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_ipblock_data.o
> +obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
> obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o
> obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o
Looks like the Makefile needs the following addition for make randconfig
builds to work properly.
Regards,
Tony
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -121,6 +121,7 @@ obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common)
am33xx-43xx-prcm-common += prm33xx.o cm33xx.o
+obj-$(CONFIG_SOC_TI81XX) += $(am33xx-43xx-prcm-common)
obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common)
obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \
$(am33xx-43xx-prcm-common)
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: OMAP2+: Add dm816x hwmod support
Date: Wed, 14 Jan 2015 11:43:01 -0800 [thread overview]
Message-ID: <20150114194301.GR2419@atomide.com> (raw)
In-Reply-To: <1421191355-12835-3-git-send-email-tony@atomide.com>
* Tony Lindgren <tony@atomide.com> [150113 15:29]:
> Add minimal hwmod support that works at least on dm8168. This
> is based on the code in the earlier TI CDP tree, and an earlier
> patch by Aida Mynzhasova <aida.mynzhasova@skitlab.ru>.
>
> I've set up things to work pretty much the same way as for
> am33xx. We are basically using cm33xx.c with a different set
> of clocks and clockdomains.
>
> This code is based on the TI81XX-LINUX-PSP-04.04.00.02 patches
> published at:
>
> http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html
>
> Cc: Aida Mynzhasova <aida.mynzhasova@skitlab.ru>
> Cc: Brian Hutchinson <b.hutchman@gmail.com>
> Cc: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/mach-omap2/Makefile | 1 +
> arch/arm/mach-omap2/io.c | 8 +-
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/omap_hwmod.h | 1 +
> arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1025 ++++++++++++++++++++++++++++
> 5 files changed, 1034 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/mach-omap2/omap_hwmod_81xx_data.c
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 352873c..926bc39 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -226,6 +226,7 @@ obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_ipblock_data.o
> obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_43xx_data.o
> obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_interconnect_data.o
> obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_ipblock_data.o
> +obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
> obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o
> obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o
Looks like the Makefile needs the following addition for make randconfig
builds to work properly.
Regards,
Tony
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -121,6 +121,7 @@ obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common)
am33xx-43xx-prcm-common += prm33xx.o cm33xx.o
+obj-$(CONFIG_SOC_TI81XX) += $(am33xx-43xx-prcm-common)
obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common)
obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \
$(am33xx-43xx-prcm-common)
next prev parent reply other threads:[~2015-01-14 19:46 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-13 23:22 [PATCH 0/2] Add clockdomain and hwmod data needed to boot dm816x Tony Lindgren
2015-01-13 23:22 ` Tony Lindgren
2015-01-13 23:22 ` [PATCH 1/2] ARM: OMAP2+: Add clock domain support for dm816x Tony Lindgren
2015-01-13 23:22 ` Tony Lindgren
2015-01-19 19:15 ` Tony Lindgren
2015-01-19 19:15 ` Tony Lindgren
2015-01-21 2:05 ` Paul Walmsley
2015-01-21 2:05 ` Paul Walmsley
2015-01-21 4:11 ` Tony Lindgren
2015-01-21 4:11 ` Tony Lindgren
2015-01-23 9:16 ` Paul Walmsley
2015-01-23 9:16 ` Paul Walmsley
2015-01-23 16:14 ` Tony Lindgren
2015-01-23 16:14 ` Tony Lindgren
2015-01-13 23:22 ` [PATCH 2/2] ARM: OMAP2+: Add dm816x hwmod support Tony Lindgren
2015-01-13 23:22 ` Tony Lindgren
2015-01-14 19:43 ` Tony Lindgren [this message]
2015-01-14 19:43 ` Tony Lindgren
2015-01-17 16:31 ` Tony Lindgren
2015-01-17 16:31 ` Tony Lindgren
2015-01-21 4:34 ` Tony Lindgren
2015-01-21 4:34 ` Tony Lindgren
2015-01-23 10:28 ` Paul Walmsley
2015-01-23 10:28 ` Paul Walmsley
2015-01-23 18:21 ` Paul Walmsley
2015-01-23 18:21 ` Paul Walmsley
2015-01-24 0:14 ` Tony Lindgren
2015-01-24 0:14 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150114194301.GR2419@atomide.com \
--to=tony@atomide.com \
--cc=aida.mynzhasova@skitlab.ru \
--cc=b.hutchman@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.