All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Felipe Balbi <balbi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	Linux ARM Kernel Mailing List
	<linux-arm-kernel@lists.infradead.org>,
	stable@vger.kernel.org, Keerthy <j-keerthy@ti.com>
Subject: Re: [PATCH 1/5] mfd: tps65218: make INT[12] and STATUS registers volatile
Date: Sun, 18 Jan 2015 09:52:14 +0000	[thread overview]
Message-ID: <20150118095214.GA3574@x1> (raw)
In-Reply-To: <1419622104-25812-2-git-send-email-balbi@ti.com>

On Fri, 26 Dec 2014, Felipe Balbi wrote:

> STATUS register can be modified by the HW, so we
> should bypass cache because of that.
> 
> In the case of INT[12] registers, they are the ones
> that actually clear the IRQ source at the time they
> are read. If we rely on the cache for them, we will
> never be able to clear the interrupt, which will cause
> our IRQ line to be disabled due to IRQ throttling.
> 
> Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
> Cc: <stable@vger.kernel.org> # v3.15+
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> ---
>  drivers/mfd/tps65218.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)

Sorry for the delay.  It's difficult to get a WiFi signal 2000m up in
an Austrian mountain. :)

Applied now, thanks.

> diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
> index 0d256cb..2243f75 100644
> --- a/drivers/mfd/tps65218.c
> +++ b/drivers/mfd/tps65218.c
> @@ -125,10 +125,21 @@ int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
>  }
>  EXPORT_SYMBOL_GPL(tps65218_clear_bits);
>  
> +static const struct regmap_range tps65218_yes_ranges[] = {
> +	regmap_reg_range(TPS65218_REG_INT1, TPS65218_REG_INT2),
> +	regmap_reg_range(TPS65218_REG_STATUS, TPS65218_REG_STATUS),
> +};
> +
> +static const struct regmap_access_table tps65218_volatile_table = {
> +	.yes_ranges = tps65218_yes_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges),
> +};
> +
>  static struct regmap_config tps65218_regmap_config = {
>  	.reg_bits = 8,
>  	.val_bits = 8,
>  	.cache_type = REGCACHE_RBTREE,
> +	.volatile_table = &tps65218_volatile_table,
>  };
>  
>  static const struct regmap_irq tps65218_irqs[] = {

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] mfd: tps65218: make INT[12] and STATUS registers volatile
Date: Sun, 18 Jan 2015 09:52:14 +0000	[thread overview]
Message-ID: <20150118095214.GA3574@x1> (raw)
In-Reply-To: <1419622104-25812-2-git-send-email-balbi@ti.com>

On Fri, 26 Dec 2014, Felipe Balbi wrote:

> STATUS register can be modified by the HW, so we
> should bypass cache because of that.
> 
> In the case of INT[12] registers, they are the ones
> that actually clear the IRQ source at the time they
> are read. If we rely on the cache for them, we will
> never be able to clear the interrupt, which will cause
> our IRQ line to be disabled due to IRQ throttling.
> 
> Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
> Cc: <stable@vger.kernel.org> # v3.15+
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> ---
>  drivers/mfd/tps65218.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)

Sorry for the delay.  It's difficult to get a WiFi signal 2000m up in
an Austrian mountain. :)

Applied now, thanks.

> diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
> index 0d256cb..2243f75 100644
> --- a/drivers/mfd/tps65218.c
> +++ b/drivers/mfd/tps65218.c
> @@ -125,10 +125,21 @@ int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
>  }
>  EXPORT_SYMBOL_GPL(tps65218_clear_bits);
>  
> +static const struct regmap_range tps65218_yes_ranges[] = {
> +	regmap_reg_range(TPS65218_REG_INT1, TPS65218_REG_INT2),
> +	regmap_reg_range(TPS65218_REG_STATUS, TPS65218_REG_STATUS),
> +};
> +
> +static const struct regmap_access_table tps65218_volatile_table = {
> +	.yes_ranges = tps65218_yes_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges),
> +};
> +
>  static struct regmap_config tps65218_regmap_config = {
>  	.reg_bits = 8,
>  	.val_bits = 8,
>  	.cache_type = REGCACHE_RBTREE,
> +	.volatile_table = &tps65218_volatile_table,
>  };
>  
>  static const struct regmap_irq tps65218_irqs[] = {

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply	other threads:[~2015-01-18  9:52 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-26 19:28 [PATCH 0/5] AM437x SK: Add power-button support Felipe Balbi
2014-12-26 19:28 ` Felipe Balbi
2014-12-26 19:28 ` [PATCH 1/5] mfd: tps65218: make INT[12] and STATUS registers volatile Felipe Balbi
2014-12-26 19:28   ` Felipe Balbi
     [not found]   ` <1419622104-25812-2-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2015-01-06 17:37     ` Felipe Balbi
2015-01-06 17:37       ` Felipe Balbi
2015-01-08 16:25       ` Felipe Balbi
2015-01-08 16:25         ` Felipe Balbi
2015-01-12 16:46         ` Felipe Balbi
2015-01-12 16:46           ` Felipe Balbi
2015-01-14 17:07           ` Tony Lindgren
2015-01-14 17:07             ` Tony Lindgren
2015-01-16 22:57             ` Felipe Balbi
2015-01-16 22:57               ` Felipe Balbi
2015-01-18  9:52   ` Lee Jones [this message]
2015-01-18  9:52     ` Lee Jones
2015-01-19 14:41     ` Felipe Balbi
2015-01-19 14:41       ` Felipe Balbi
2014-12-26 19:28 ` [PATCH 2/5] mfd: tps65218: make INT1 our status_base register Felipe Balbi
2014-12-26 19:28   ` Felipe Balbi
2015-01-06 17:37   ` Felipe Balbi
2015-01-06 17:37     ` Felipe Balbi
2015-01-18  9:52   ` Lee Jones
2015-01-18  9:52     ` Lee Jones
2014-12-26 19:28 ` [PATCH 3/5] input: misc: add tps65218 power button driver Felipe Balbi
2014-12-26 19:28   ` Felipe Balbi
2014-12-26 19:33   ` Felipe Balbi
2014-12-26 19:33     ` Felipe Balbi
2014-12-26 23:41   ` Dmitry Torokhov
2014-12-26 23:41     ` Dmitry Torokhov
2014-12-27  3:36     ` [PATCH v2 " Felipe Balbi
2014-12-27  3:36       ` Felipe Balbi
2014-12-28  4:50       ` Dmitry Torokhov
2014-12-28  4:50         ` Dmitry Torokhov
2014-12-26 19:28 ` [PATCH 4/5] arm: boot: dts: am437x-sk: add power button binding Felipe Balbi
2014-12-26 19:28   ` Felipe Balbi
2015-01-08  0:09   ` Tony Lindgren
2015-01-08  0:09     ` Tony Lindgren
2014-12-26 19:28 ` [PATCH 5/5] arm: omap2plus_defconfig: enable TPS65218 power button Felipe Balbi
2014-12-26 19:28   ` Felipe Balbi
2015-01-08  0:55   ` Tony Lindgren
2015-01-08  0:55     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150118095214.GA3574@x1 \
    --to=lee.jones@linaro.org \
    --cc=balbi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=stable@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.