From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: imx6sx-sdb: change default board as reva board
Date: Tue, 20 Jan 2015 15:35:29 +0800 [thread overview]
Message-ID: <20150120073527.GT2766@dragon> (raw)
In-Reply-To: <1421220998-3491-2-git-send-email-peter.chen@freescale.com>
On Wed, Jan 14, 2015 at 03:36:37PM +0800, Peter Chen wrote:
> The imx6sx sdb board has two revisions, the current mainline one
> is reva which is mainly for internal use. In this commit, we
> rename imx6sx-sdb.dts to imx6sx-sdb.dtsi, and move the reva dedicated
> contents to imx6sx-sdb-reva.dts.
>
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> ---
> arch/arm/boot/dts/imx6sx-sdb-reva.dts | 158 +++++++++++++++++++++
> .../boot/dts/{imx6sx-sdb.dts => imx6sx-sdb.dtsi} | 131 -----------------
arch/arm/boot/dts/Makefile needs an update.
> 2 files changed, 158 insertions(+), 131 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6sx-sdb-reva.dts
> rename arch/arm/boot/dts/{imx6sx-sdb.dts => imx6sx-sdb.dtsi} (83%)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> new file mode 100644
> index 0000000..e7a8c34
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> @@ -0,0 +1,158 @@
> +/*
> + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "imx6sx-sdb.dtsi"
> +
> +/ {
> + model = "Freescale i.MX6 SoloX SDB RevA Board";
> +};
> +
> +&cpu0 {
> + operating-points = <
> + /* kHz uV */
> + 996000 1250000
> + 792000 1175000
> + 396000 1075000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC uV */
> + 996000 1175000
> + 792000 1175000
> + 396000 1175000
> + >;
I'm wondering why different revision of the board require a different
OPP settings.
Shawn
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic: pfuze100 at 08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3b_reg: sw3b {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-always-on;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&qspi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi2>;
> + status = "okay";
> +
> + flash0: s25fl128s at 0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spansion,s25fl128s";
> + spi-max-frequency = <66000000>;
> + };
> +
> + flash1: s25fl128s at 1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spansion,s25fl128s";
> + spi-max-frequency = <66000000>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> similarity index 83%
> rename from arch/arm/boot/dts/imx6sx-sdb.dts
> rename to arch/arm/boot/dts/imx6sx-sdb.dtsi
> index cdffe84..7b02aa7 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> @@ -13,7 +13,6 @@
> #include "imx6sx.dtsi"
>
> / {
> - model = "Freescale i.MX6 SoloX SDB Board";
> compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
>
> chosen {
> @@ -169,114 +168,6 @@
> status = "okay";
> };
>
> -&i2c1 {
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c1>;
> - status = "okay";
> -
> - pmic: pfuze100 at 08 {
> - compatible = "fsl,pfuze100";
> - reg = <0x08>;
> -
> - regulators {
> - sw1a_reg: sw1ab {
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1875000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <6250>;
> - };
> -
> - sw1c_reg: sw1c {
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1875000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <6250>;
> - };
> -
> - sw2_reg: sw2 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw3a_reg: sw3a {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <1975000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw3b_reg: sw3b {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <1975000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw4_reg: sw4 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - swbst_reg: swbst {
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5150000>;
> - };
> -
> - snvs_reg: vsnvs {
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - vref_reg: vrefddr {
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - vgen1_reg: vgen1 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1550000>;
> - regulator-always-on;
> - };
> -
> - vgen2_reg: vgen2 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1550000>;
> - };
> -
> - vgen3_reg: vgen3 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - vgen4_reg: vgen4 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - vgen5_reg: vgen5 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - vgen6_reg: vgen6 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> &i2c4 {
> clock-frequency = <100000>;
> pinctrl-names = "default";
> @@ -340,28 +231,6 @@
> status = "okay";
> };
>
> -&qspi2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_qspi2>;
> - status = "okay";
> -
> - flash0: s25fl128s at 0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "spansion,s25fl128s";
> - spi-max-frequency = <66000000>;
> - };
> -
> - flash1: s25fl128s at 1 {
> - reg = <1>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "spansion,s25fl128s";
> - spi-max-frequency = <66000000>;
> - };
> -};
> -
> &ssi2 {
> status = "okay";
> };
> --
> 1.9.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/2] ARM: imx6sx-sdb: change default board as reva board
Date: Tue, 20 Jan 2015 15:35:29 +0800 [thread overview]
Message-ID: <20150120073527.GT2766@dragon> (raw)
In-Reply-To: <1421220998-3491-2-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
On Wed, Jan 14, 2015 at 03:36:37PM +0800, Peter Chen wrote:
> The imx6sx sdb board has two revisions, the current mainline one
> is reva which is mainly for internal use. In this commit, we
> rename imx6sx-sdb.dts to imx6sx-sdb.dtsi, and move the reva dedicated
> contents to imx6sx-sdb-reva.dts.
>
> Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
> arch/arm/boot/dts/imx6sx-sdb-reva.dts | 158 +++++++++++++++++++++
> .../boot/dts/{imx6sx-sdb.dts => imx6sx-sdb.dtsi} | 131 -----------------
arch/arm/boot/dts/Makefile needs an update.
> 2 files changed, 158 insertions(+), 131 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6sx-sdb-reva.dts
> rename arch/arm/boot/dts/{imx6sx-sdb.dts => imx6sx-sdb.dtsi} (83%)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> new file mode 100644
> index 0000000..e7a8c34
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> @@ -0,0 +1,158 @@
> +/*
> + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "imx6sx-sdb.dtsi"
> +
> +/ {
> + model = "Freescale i.MX6 SoloX SDB RevA Board";
> +};
> +
> +&cpu0 {
> + operating-points = <
> + /* kHz uV */
> + 996000 1250000
> + 792000 1175000
> + 396000 1075000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC uV */
> + 996000 1175000
> + 792000 1175000
> + 396000 1175000
> + >;
I'm wondering why different revision of the board require a different
OPP settings.
Shawn
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic: pfuze100@08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3b_reg: sw3b {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-always-on;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&qspi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi2>;
> + status = "okay";
> +
> + flash0: s25fl128s@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spansion,s25fl128s";
> + spi-max-frequency = <66000000>;
> + };
> +
> + flash1: s25fl128s@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spansion,s25fl128s";
> + spi-max-frequency = <66000000>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> similarity index 83%
> rename from arch/arm/boot/dts/imx6sx-sdb.dts
> rename to arch/arm/boot/dts/imx6sx-sdb.dtsi
> index cdffe84..7b02aa7 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> @@ -13,7 +13,6 @@
> #include "imx6sx.dtsi"
>
> / {
> - model = "Freescale i.MX6 SoloX SDB Board";
> compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
>
> chosen {
> @@ -169,114 +168,6 @@
> status = "okay";
> };
>
> -&i2c1 {
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c1>;
> - status = "okay";
> -
> - pmic: pfuze100@08 {
> - compatible = "fsl,pfuze100";
> - reg = <0x08>;
> -
> - regulators {
> - sw1a_reg: sw1ab {
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1875000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <6250>;
> - };
> -
> - sw1c_reg: sw1c {
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1875000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <6250>;
> - };
> -
> - sw2_reg: sw2 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw3a_reg: sw3a {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <1975000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw3b_reg: sw3b {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <1975000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw4_reg: sw4 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - swbst_reg: swbst {
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5150000>;
> - };
> -
> - snvs_reg: vsnvs {
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - vref_reg: vrefddr {
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - vgen1_reg: vgen1 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1550000>;
> - regulator-always-on;
> - };
> -
> - vgen2_reg: vgen2 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1550000>;
> - };
> -
> - vgen3_reg: vgen3 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - vgen4_reg: vgen4 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - vgen5_reg: vgen5 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - vgen6_reg: vgen6 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> &i2c4 {
> clock-frequency = <100000>;
> pinctrl-names = "default";
> @@ -340,28 +231,6 @@
> status = "okay";
> };
>
> -&qspi2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_qspi2>;
> - status = "okay";
> -
> - flash0: s25fl128s@0 {
> - reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "spansion,s25fl128s";
> - spi-max-frequency = <66000000>;
> - };
> -
> - flash1: s25fl128s@1 {
> - reg = <1>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "spansion,s25fl128s";
> - spi-max-frequency = <66000000>;
> - };
> -};
> -
> &ssi2 {
> status = "okay";
> };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-01-20 7:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 7:36 [PATCH 0/2] ARM: imx6sx-sdb: add revb board Peter Chen
2015-01-14 7:36 ` Peter Chen
2015-01-14 7:36 ` [PATCH 1/2] ARM: imx6sx-sdb: change default board as reva board Peter Chen
2015-01-14 7:36 ` Peter Chen
2015-01-20 7:35 ` Shawn Guo [this message]
2015-01-20 7:35 ` Shawn Guo
2015-01-20 6:30 ` Peter Chen
2015-01-20 6:30 ` Peter Chen
2015-01-20 7:51 ` Anson.Huang at freescale.com
2015-01-20 7:51 ` Anson.Huang-KZfg59tc24xl57MIdRCFDg
2015-01-20 8:03 ` Shawn Guo
2015-01-20 8:03 ` Shawn Guo
2015-01-14 7:36 ` [PATCH 2/2] ARM: imx6sx-sdb: add revb board Peter Chen
2015-01-14 7:36 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150120073527.GT2766@dragon \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.