All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Tony Lindgren <tony@atomide.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	devicetree@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/7] mfd: menelaus: drop support for SW controller VCORE
Date: Tue, 20 Jan 2015 13:52:01 +0000	[thread overview]
Message-ID: <20150120135201.GM13701@x1> (raw)
In-Reply-To: <1419702779-16001-3-git-send-email-aaro.koskinen@iki.fi>

On Sat, 27 Dec 2014, Aaro Koskinen wrote:

> Drop support for SW controlled VCORE, nobody uses it.
> 
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> ---
>  drivers/mfd/menelaus.c       | 23 -----------------------
>  include/linux/mfd/menelaus.h |  1 -
>  2 files changed, 24 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
> index 9f01aef..917fa86 100644
> --- a/drivers/mfd/menelaus.c
> +++ b/drivers/mfd/menelaus.c
> @@ -532,29 +532,6 @@ static const struct menelaus_vtg_value vcore_values[] = {
>  	{ 1450, 18 },
>  };
>  
> -int menelaus_set_vcore_sw(unsigned int mV)
> -{
> -	int val, ret;
> -	struct i2c_client *c = the_menelaus->client;
> -
> -	val = menelaus_get_vtg_value(mV, vcore_values,
> -				     ARRAY_SIZE(vcore_values));
> -	if (val < 0)
> -		return -EINVAL;
> -
> -	dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
> -
> -	/* Set SW mode and the voltage in one go. */
> -	mutex_lock(&the_menelaus->lock);
> -	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
> -	if (ret == 0)
> -		the_menelaus->vcore_hw_mode = 0;
> -	mutex_unlock(&the_menelaus->lock);
> -	msleep(1);
> -
> -	return ret;
> -}
> -
>  int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
>  {
>  	int fval, rval, val, ret;
> diff --git a/include/linux/mfd/menelaus.h b/include/linux/mfd/menelaus.h
> index a1e12bf3..9e85ac0 100644
> --- a/include/linux/mfd/menelaus.h
> +++ b/include/linux/mfd/menelaus.h
> @@ -24,7 +24,6 @@ extern int menelaus_set_vaux(unsigned int mV);
>  extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
>  extern int menelaus_set_slot_sel(int enable);
>  extern int menelaus_get_slot_pin_states(void);
> -extern int menelaus_set_vcore_sw(unsigned int mV);
>  extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
>  
>  #define EN_VPLL_SLEEP	(1 << 7)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] mfd: menelaus: drop support for SW controller VCORE
Date: Tue, 20 Jan 2015 13:52:01 +0000	[thread overview]
Message-ID: <20150120135201.GM13701@x1> (raw)
In-Reply-To: <1419702779-16001-3-git-send-email-aaro.koskinen@iki.fi>

On Sat, 27 Dec 2014, Aaro Koskinen wrote:

> Drop support for SW controlled VCORE, nobody uses it.
> 
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> ---
>  drivers/mfd/menelaus.c       | 23 -----------------------
>  include/linux/mfd/menelaus.h |  1 -
>  2 files changed, 24 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
> index 9f01aef..917fa86 100644
> --- a/drivers/mfd/menelaus.c
> +++ b/drivers/mfd/menelaus.c
> @@ -532,29 +532,6 @@ static const struct menelaus_vtg_value vcore_values[] = {
>  	{ 1450, 18 },
>  };
>  
> -int menelaus_set_vcore_sw(unsigned int mV)
> -{
> -	int val, ret;
> -	struct i2c_client *c = the_menelaus->client;
> -
> -	val = menelaus_get_vtg_value(mV, vcore_values,
> -				     ARRAY_SIZE(vcore_values));
> -	if (val < 0)
> -		return -EINVAL;
> -
> -	dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
> -
> -	/* Set SW mode and the voltage in one go. */
> -	mutex_lock(&the_menelaus->lock);
> -	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
> -	if (ret == 0)
> -		the_menelaus->vcore_hw_mode = 0;
> -	mutex_unlock(&the_menelaus->lock);
> -	msleep(1);
> -
> -	return ret;
> -}
> -
>  int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
>  {
>  	int fval, rval, val, ret;
> diff --git a/include/linux/mfd/menelaus.h b/include/linux/mfd/menelaus.h
> index a1e12bf3..9e85ac0 100644
> --- a/include/linux/mfd/menelaus.h
> +++ b/include/linux/mfd/menelaus.h
> @@ -24,7 +24,6 @@ extern int menelaus_set_vaux(unsigned int mV);
>  extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
>  extern int menelaus_set_slot_sel(int enable);
>  extern int menelaus_get_slot_pin_states(void);
> -extern int menelaus_set_vcore_sw(unsigned int mV);
>  extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
>  
>  #define EN_VPLL_SLEEP	(1 << 7)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-01-20 13:52 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-27 17:52 [PATCH 0/7] Menelaus cleanup for DT, phase 1 Aaro Koskinen
2014-12-27 17:52 ` Aaro Koskinen
2014-12-27 17:52 ` [PATCH 1/7] mfd: menelaus: delete omap_has_menelaus Aaro Koskinen
2014-12-27 17:52   ` Aaro Koskinen
2015-01-20 13:50   ` Lee Jones
2015-01-20 13:50     ` Lee Jones
2014-12-27 17:52 ` [PATCH 2/7] mfd: menelaus: drop support for SW controller VCORE Aaro Koskinen
2014-12-27 17:52   ` Aaro Koskinen
2015-01-20 13:52   ` Lee Jones [this message]
2015-01-20 13:52     ` Lee Jones
2014-12-27 17:52 ` [PATCH 3/7] mfd: menelaus: add initial DT support Aaro Koskinen
2014-12-27 17:52   ` Aaro Koskinen
2014-12-27 21:25   ` Felipe Balbi
2014-12-27 21:25     ` Felipe Balbi
2014-12-28 23:34     ` Aaro Koskinen
2014-12-28 23:34       ` Aaro Koskinen
2014-12-29 18:12       ` Felipe Balbi
2014-12-29 18:12         ` Felipe Balbi
2014-12-27 17:52 ` [PATCH 5/7] mfd: menelaus: delete platform data support Aaro Koskinen
2014-12-27 17:52   ` Aaro Koskinen
2015-01-20 13:54   ` Lee Jones
2015-01-20 13:54     ` Lee Jones
2014-12-27 17:52 ` [PATCH 6/7] mfd: menelaus: make vcore and regulator controls internal Aaro Koskinen
2014-12-27 17:52   ` Aaro Koskinen
2015-01-20 13:58   ` Lee Jones
2015-01-20 13:58     ` Lee Jones
2015-01-20 14:01     ` Lee Jones
2015-01-20 14:01       ` Lee Jones
2014-12-27 17:52 ` [PATCH 7/7] mfd: menelaus: use macro for magic number Aaro Koskinen
2014-12-27 17:52   ` Aaro Koskinen
     [not found]   ` <1419702779-16001-8-git-send-email-aaro.koskinen-X3B1VOXEql0@public.gmane.org>
2015-01-20 14:01     ` Lee Jones
2015-01-20 14:01       ` Lee Jones
     [not found] ` <1419702779-16001-1-git-send-email-aaro.koskinen-X3B1VOXEql0@public.gmane.org>
2014-12-27 17:52   ` [PATCH 4/7] ARM: OMAP: N8x0: configure menelaus using DT Aaro Koskinen
2014-12-27 17:52     ` Aaro Koskinen
2015-01-20 17:13   ` [PATCH 0/7] Menelaus cleanup for DT, phase 1 Lee Jones
2015-01-20 17:13     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150120135201.GM13701@x1 \
    --to=lee.jones@linaro.org \
    --cc=aaro.koskinen@iki.fi \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.