Re: [PATCH 6/8] usb: dwc3: add ULPI interface support

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 2082 bytes --]

On Mon, Jan 26, 2015 at 01:46:10PM +0200, Heikki Krogerus wrote:
> On Fri, Jan 23, 2015 at 10:24:43AM -0600, Felipe Balbi wrote:
> > On Fri, Jan 23, 2015 at 05:12:56PM +0200, Heikki Krogerus wrote:
> > > +int dwc3_ulpi_init(struct dwc3 *dwc)
> > > +{
> > > +	u32 reg;
> > > +
> > > +	/* First check USB2 PHY interface type */
> > > +	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
> > > +	case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
> > > +		/* Select ULPI Interface */
> > > +		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> > > +		reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
> > > +		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> > > +		/* FALLTHROUGH */
> > > +	case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
> > > +		break;
> > > +	default:
> > > +		return 0;
> > > +	}
> > > +
> > > +	/* Register the interface */
> > > +	dwc->ulpi = ulpi_register_interface(dwc->dev, &dwc3_ulpi);
> > > +	if (IS_ERR(dwc->ulpi)) {
> > 
> > so, this will only build and link if DWC3_ULPI is enabled, in case of
> > error you return early...
> > 
> > > +		dev_err(dwc->dev, "failed to register ULPI interface");
> > > +		return PTR_ERR(dwc->ulpi);
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +void dwc3_ulpi_exit(struct dwc3 *dwc)
> > > +{
> > > +	if (dwc->ulpi) {
> > 
> > ... looks like this branch is unnecessary.
> 
> We can't do that, or distros that select DWC3_ULPI option can only use
> dwc3 with hardware that really has ULPI PHY. So I guess we'll drop the
> DWC3_ULPI option and build the dwc3 ulpi support always if ULPI bus is
> enabled. OK?

look at your patch again. In case DWC3_ULPI isn't enabled, this file
won't be linked at all. You're using stubs, so taht's fine.

In case it _is_ enabled, you're breaking out early if you can't register
ulpi interface, meaning you're exitting probe() (which, in fact, seems
wrong as I want to be able to run dwc3 with ULPI enabled on a platform
that was configured with ULPI+UTMI, but uses UTMI PHY).

I still think this patch won't work in all cases.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]