Re: [PATCH 1/8] usb: add bus type for USB ULPI

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1237 bytes --]

Hi,

On Fri, Jan 23, 2015 at 05:12:51PM +0200, Heikki Krogerus wrote:
> @@ -6,4 +6,5 @@ obj-$(CONFIG_USB_COMMON)	  += usb-common.o
>  usb-common-y			  += common.o
>  usb-common-$(CONFIG_USB_LED_TRIG) += led.o
>  
> -obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
> +obj-$(CONFIG_USB_OTG_FSM)	+= usb-otg-fsm.o

a bit of unrelated change here.

> diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
> index cc0ced0..c0fc3b5 100644
> --- a/drivers/usb/core/Kconfig
> +++ b/drivers/usb/core/Kconfig
> @@ -84,3 +84,11 @@ config USB_OTG_FSM
>  	  Implements OTG Finite State Machine as specified in On-The-Go
>  	  and Embedded Host Supplement to the USB Revision 2.0 Specification.
>  
> +config USB_ULPI_BUS
> +	bool "USB ULPI PHY interface support"
> +	depends on USB || USB_GADGET

depends on USB_SUPPORT ?

> +int ulpi_register_driver(struct ulpi_driver *drv);
> +void ulpi_unregister_driver(struct ulpi_driver *drv);
> +
> +#define module_ulpi_driver(__ulpi_driver) \
> +	module_driver(__ulpi_driver, ulpi_register_driver, \
> +		      ulpi_unregister_driver)
> +
> +int ulpi_read(struct ulpi *ulpi, u8 addr);
> +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val);

no stubs ?

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]