From: Pavel Machek <pavel@ucw.cz>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: "Pali Rohár" <pali.rohar@gmail.com>,
"Jarkko Nikula" <jarkko.nikula@bitmer.com>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Jaroslav Kysela" <perex@perex.cz>,
"Takashi Iwai" <tiwai@suse.de>,
linux-omap@vger.kernel.org, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org,
"Sebastian Reichel" <sre@debian.org>,
"Ivaylo Dimitrov" <ivo.g.dimitrov.75@gmail.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>
Subject: Re: [PATCH] ASoC: rx51: do not fail if could not get jack detection gpio
Date: Tue, 27 Jan 2015 14:32:27 +0100 [thread overview]
Message-ID: <20150127133227.GA25306@amd> (raw)
In-Reply-To: <54C7925E.3020303@ti.com>
On Tue 2015-01-27 15:27:58, Peter Ujfalusi wrote:
> Hi,
>
> On 01/26/2015 10:51 PM, Pali Rohár wrote:
> > qemu does not emulate it
>
> Not sure about this... How does qemu emulate tlv320aic3106, tpa6130a2a, McBSP,
> sDMA for audio to work? What about the other three GPIOs in this machine driver?
>
> The "nokia,n900-audio" compatible mandates that the jack-detection GPIO must
> be provided (Documentation/devicetree/bindings/sound/nokia,rx51.txt) since it
> means that the driver is running on the Nokia n900 HW.
Fix the documentation, then :-). [Actually, GPIO is provided, it just
can't be requested, AFAICT.]
It is quite important to keep qemu working, really. Debugging early
boot on hardware is very hard, for example.
And yes, some day we may need different dts for n900-qemu
(vs. n900-hw), but lets not do it just yet.
Pavel
>
> > Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> > ---
> > sound/soc/omap/rx51.c | 45 +++++++++++++++++++++++++--------------------
> > 1 file changed, 25 insertions(+), 20 deletions(-)
> >
> > diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
> > index 04896d6..a689021 100644
> > --- a/sound/soc/omap/rx51.c
> > +++ b/sound/soc/omap/rx51.c
> > @@ -310,25 +310,27 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
> > return err;
> > }
> >
> > - /* AV jack detection */
> > - err = snd_soc_jack_new(codec, "AV Jack",
> > - SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
> > - &rx51_av_jack);
> > - if (err) {
> > - dev_err(card->dev, "Failed to add AV Jack\n");
> > - return err;
> > - }
> > + if (!IS_ERR(pdata->jack_detection_gpio)) {
> > + /* AV jack detection */
> > + err = snd_soc_jack_new(codec, "AV Jack",
> > + SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
> > + &rx51_av_jack);
> > + if (err) {
> > + dev_err(card->dev, "Failed to add AV Jack\n");
> > + return err;
> > + }
> >
> > - /* prepare gpio for snd_soc_jack_add_gpios */
> > - rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
> > - devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
> > + /* prepare gpio for snd_soc_jack_add_gpios */
> > + rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
> > + devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
> >
> > - err = snd_soc_jack_add_gpios(&rx51_av_jack,
> > - ARRAY_SIZE(rx51_av_jack_gpios),
> > - rx51_av_jack_gpios);
> > - if (err) {
> > - dev_err(card->dev, "Failed to add GPIOs\n");
> > - return err;
> > + err = snd_soc_jack_add_gpios(&rx51_av_jack,
> > + ARRAY_SIZE(rx51_av_jack_gpios),
> > + rx51_av_jack_gpios);
> > + if (err) {
> > + dev_err(card->dev, "Failed to add GPIOs\n");
> > + return err;
> > + }
> > }
> >
> > return err;
> > @@ -336,8 +338,11 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
> >
> > static int rx51_card_remove(struct snd_soc_card *card)
> > {
> > - snd_soc_jack_free_gpios(&rx51_av_jack, ARRAY_SIZE(rx51_av_jack_gpios),
> > - rx51_av_jack_gpios);
> > + struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
> > +
> > + if (!IS_ERR(pdata->jack_detection_gpio))
> > + snd_soc_jack_free_gpios(&rx51_av_jack, ARRAY_SIZE(rx51_av_jack_gpios),
> > + rx51_av_jack_gpios);
> >
> > return 0;
> > }
> > @@ -470,8 +475,8 @@ static int rx51_soc_probe(struct platform_device *pdev)
> > pdata->jack_detection_gpio = devm_gpiod_get(card->dev,
> > "jack-detection");
> > if (IS_ERR(pdata->jack_detection_gpio)) {
> > + /* Do not fail, qemu does not emulate jack detection gpio */
> > dev_err(card->dev, "could not get jack detection gpio\n");
> > - return PTR_ERR(pdata->jack_detection_gpio);
> > }
> >
> > pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch");
> >
>
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Pavel Machek <pavel@ucw.cz>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: "Pali Rohár" <pali.rohar@gmail.com>,
"Jarkko Nikula" <jarkko.nikula@bitmer.com>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Jaroslav Kysela" <perex@perex.cz>,
"Takashi Iwai" <tiwai@suse.de>,
linux-omap@vger.kernel.org, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org,
"Sebastian Reichel" <sre@debian.org>,
"Ivaylo Dimitrov" <ivo.g.dimitrov.75@gmail.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>
Subject: Re: [PATCH] ASoC: rx51: do not fail if could not get jack detection gpio
Date: Tue, 27 Jan 2015 14:32:27 +0100 [thread overview]
Message-ID: <20150127133227.GA25306@amd> (raw)
In-Reply-To: <54C7925E.3020303@ti.com>
On Tue 2015-01-27 15:27:58, Peter Ujfalusi wrote:
> Hi,
>
> On 01/26/2015 10:51 PM, Pali Rohár wrote:
> > qemu does not emulate it
>
> Not sure about this... How does qemu emulate tlv320aic3106, tpa6130a2a, McBSP,
> sDMA for audio to work? What about the other three GPIOs in this machine driver?
>
> The "nokia,n900-audio" compatible mandates that the jack-detection GPIO must
> be provided (Documentation/devicetree/bindings/sound/nokia,rx51.txt) since it
> means that the driver is running on the Nokia n900 HW.
Fix the documentation, then :-). [Actually, GPIO is provided, it just
can't be requested, AFAICT.]
It is quite important to keep qemu working, really. Debugging early
boot on hardware is very hard, for example.
And yes, some day we may need different dts for n900-qemu
(vs. n900-hw), but lets not do it just yet.
Pavel
>
> > Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> > ---
> > sound/soc/omap/rx51.c | 45 +++++++++++++++++++++++++--------------------
> > 1 file changed, 25 insertions(+), 20 deletions(-)
> >
> > diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
> > index 04896d6..a689021 100644
> > --- a/sound/soc/omap/rx51.c
> > +++ b/sound/soc/omap/rx51.c
> > @@ -310,25 +310,27 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
> > return err;
> > }
> >
> > - /* AV jack detection */
> > - err = snd_soc_jack_new(codec, "AV Jack",
> > - SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
> > - &rx51_av_jack);
> > - if (err) {
> > - dev_err(card->dev, "Failed to add AV Jack\n");
> > - return err;
> > - }
> > + if (!IS_ERR(pdata->jack_detection_gpio)) {
> > + /* AV jack detection */
> > + err = snd_soc_jack_new(codec, "AV Jack",
> > + SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
> > + &rx51_av_jack);
> > + if (err) {
> > + dev_err(card->dev, "Failed to add AV Jack\n");
> > + return err;
> > + }
> >
> > - /* prepare gpio for snd_soc_jack_add_gpios */
> > - rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
> > - devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
> > + /* prepare gpio for snd_soc_jack_add_gpios */
> > + rx51_av_jack_gpios[0].gpio = desc_to_gpio(pdata->jack_detection_gpio);
> > + devm_gpiod_put(card->dev, pdata->jack_detection_gpio);
> >
> > - err = snd_soc_jack_add_gpios(&rx51_av_jack,
> > - ARRAY_SIZE(rx51_av_jack_gpios),
> > - rx51_av_jack_gpios);
> > - if (err) {
> > - dev_err(card->dev, "Failed to add GPIOs\n");
> > - return err;
> > + err = snd_soc_jack_add_gpios(&rx51_av_jack,
> > + ARRAY_SIZE(rx51_av_jack_gpios),
> > + rx51_av_jack_gpios);
> > + if (err) {
> > + dev_err(card->dev, "Failed to add GPIOs\n");
> > + return err;
> > + }
> > }
> >
> > return err;
> > @@ -336,8 +338,11 @@ static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
> >
> > static int rx51_card_remove(struct snd_soc_card *card)
> > {
> > - snd_soc_jack_free_gpios(&rx51_av_jack, ARRAY_SIZE(rx51_av_jack_gpios),
> > - rx51_av_jack_gpios);
> > + struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
> > +
> > + if (!IS_ERR(pdata->jack_detection_gpio))
> > + snd_soc_jack_free_gpios(&rx51_av_jack, ARRAY_SIZE(rx51_av_jack_gpios),
> > + rx51_av_jack_gpios);
> >
> > return 0;
> > }
> > @@ -470,8 +475,8 @@ static int rx51_soc_probe(struct platform_device *pdev)
> > pdata->jack_detection_gpio = devm_gpiod_get(card->dev,
> > "jack-detection");
> > if (IS_ERR(pdata->jack_detection_gpio)) {
> > + /* Do not fail, qemu does not emulate jack detection gpio */
> > dev_err(card->dev, "could not get jack detection gpio\n");
> > - return PTR_ERR(pdata->jack_detection_gpio);
> > }
> >
> > pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch");
> >
>
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2015-01-27 13:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-26 20:51 [PATCH] ASoC: rx51: do not fail if could not get jack detection gpio Pali Rohár
2015-01-26 20:51 ` Pali Rohár
2015-01-27 13:27 ` Peter Ujfalusi
2015-01-27 13:27 ` Peter Ujfalusi
2015-01-27 13:32 ` Pavel Machek [this message]
2015-01-27 13:32 ` Pavel Machek
2015-01-27 13:41 ` Peter Ujfalusi
2015-01-27 14:11 ` Pali Rohár
2015-01-27 14:11 ` Pali Rohár
2015-01-28 14:09 ` Pali Rohár
2015-01-28 14:09 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150127133227.GA25306@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=jarkko.nikula@bitmer.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@ti.com \
--cc=sre@debian.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.