Re: Re: [PATCH] arm: sunxi: input: RFC: Add sysfs voltage for sun4i-lradc driver

[Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On Tue, Jan 27, 2015 at 08:44:47PM +0100, Maxime Ripard wrote:
> On Tue, Jan 27, 2015 at 11:52:34AM +0100, Hans de Goede wrote:
> > Hi,
> > 
> > On 27-01-15 10:49, Priit Laes wrote:
> > >
> > >On Tue, 2015-01-27 at 10:18 +0100, Maxime Ripard wrote:
> > >>Hi,
> > >>
> > >>On Mon, Jan 26, 2015 at 06:58:32PM +0200, Priit Laes wrote:
> > >>>---
> > >>
> > >>Like Hans was pointing out, commit log and signed-off-by please
> > >>
> > >>>  .../ABI/testing/sysfs-driver-input-sun4i-lradc     |  4 ++
> > >>>  drivers/input/keyboard/sun4i-lradc-keys.c          | 49
> > >>>+++++++++++++++++-----
> > >>>  2 files changed, 43 insertions(+), 10 deletions(-)
> > >>>  create mode 100644 Documentation/ABI/testing/sysfs-driver-input-
> > >>>sun4i-lradc
> > >>>
> > >>>diff --git a/Documentation/ABI/testing/sysfs-driver-input-sun4i-
> > >>>lradc b/Documentation/ABI/testing/sysfs-driver-input-sun4i-lradc
> > >>>new file mode 100644
> > >>>index 0000000..e4e6448
> > >>>--- /dev/null
> > >>>+++ b/Documentation/ABI/testing/sysfs-driver-input-sun4i-lradc
> > >>>@@ -0,0 +1,4 @@
> > >>>+What:          /sys/class/input/input(x)/device/voltage
> > >>>+Date:          February 2015
> > >>>+Contact:       Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
> > >>>+Description:   ADC output voltage in microvolts or 0 if device is
> > >>>not opened.
> > >>
> > >>Why is it returning 0 when "device is not opened" ? What does that
> > >>even mean? You can't read that file without opening it.
> > >
> > >It means that something has to open the /dev/input/inputX device which
> > >sets up the ADC before the voltage can be read from the sysfs file.
> > >
> > >[...]
> > >
> > >
> > >>
> > >>As I told you already, if you're going to expose this an ADC in the
> > >>end, the proper solution is to use the IIO framework, not adding a
> > >>custom sysfs file.
> > >
> > >My intention was to expose just a simple debug output, so one can
> > >press the buttons and read the voltages for devicetree keymap.
> > >
> > >If anyone can suggest a simpler approach than current sysfs based one,
> > >I would do it.
> > 
> > The android driver always uses 0.2V / 200mV steps, so what I do is
> > simply create a mapping with 200mV mapped to KEY_VOLUMEUP, 400mV mapped
> > to KEY_VOLUMEDOWN, etc. following the hardcoded android driver mapping:
> > 
> > https://github.com/linux-sunxi/linux-sunxi/blob/sunxi-3.4/drivers/input/keyboard/sun4i-keyboard.c#L136
> > 
> > Usually this will be correct in one go, after testing one can shuffle
> > key codes as needed (usually not needed) and/or remove unused entries.
> > 
> > With that said I do think that a sysfs file to see the actual voltages,
> > or a kernel parameter to printk them on keypress interrupt would be useful.
> > 
> > I guess the printk option would be better as it would show the actual
> > keypress value read, not some semi-random sample.
> 
> That wouldn't require that much code actually. Either using dev_dbg,
> or debugfs like Dmitry was suggesting would be two nice solutions I
> guess.

Given the stated purpose I'd say dev_dbg() and call it a day.

Thanks.

-- 
Dmitry