All of lore.kernel.org
 help / color / mirror / Atom feed
From: Henrik Rydberg <rydberg@bitmath.org>
To: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	Peter Hutterer <peter.hutterer@who-t.net>,
	linux-input <linux-input@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Input: MT - Add support for balanced slot assignment
Date: Sun, 1 Feb 2015 10:03:23 +0100	[thread overview]
Message-ID: <20150201090323.GA12868@polaris.bitmath.org> (raw)
In-Reply-To: <CAN+gG=FNJ8O-=Q4kpsVSYYY+o3KLHpfm43OT-AgTPkHYF-zVLg@mail.gmail.com>

Hi Benjamin,

> Tested this morning, and yes, it solves the problem.
> I assumed that the dmax was in mm, and used "10 * priv->x_res", which
> seemed to do the trick:
> - tapping with two fingers side by side triggered the jumps
> - in the general case (switching from the index to the thumb to
> click), the jumps disappeared.

Great, thanks for testing.

> Maybe we should also add a doc telling which units the dmax should be.

I added an enhanced description, which hopefully clarifies the units
of dmax.

> When you'll sign this, you can add my tested-by.

Done, and tested against Linus' master. I take it you have a patch on
this coming up as well?

Thanks,
Henrik

>From 2a4986420e634df2f0ba09198cb1e55714f61577 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@bitmath.org>
Date: Sun, 1 Feb 2015 09:16:10 +0100
Subject: [PATCH v2] Input: MT - Add support for balanced slot assignment

Some devices are not fast enough to differentiate between a
fast-moving contact and a new contact. This problem cannot be fully
resolved because information is truly missing, but it is possible
to safe-guard against obvious mistakes by restricting movement with
a maximum displacement.

The new problem formulation for dmax > 0 cannot benefit from the
speedup for positive definite matrices, but since the convergence is
faster, the result is about the same. For a handful of contacts, the
latency difference is truly negligible.

Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
---
 drivers/input/input-mt.c                  | 31 ++++++++++++++++++++-----------
 drivers/input/mouse/alps.c                |  2 +-
 drivers/input/mouse/bcm5974.c             |  2 +-
 drivers/input/mouse/cypress_ps2.c         |  2 +-
 drivers/input/mouse/synaptics.c           |  2 +-
 drivers/input/touchscreen/pixcir_i2c_ts.c |  2 +-
 include/linux/input/mt.h                  |  3 ++-
 7 files changed, 27 insertions(+), 17 deletions(-)

diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index fbe29fc..cb150a1 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -293,7 +293,7 @@ void input_mt_sync_frame(struct input_dev *dev)
 }
 EXPORT_SYMBOL(input_mt_sync_frame);
 
-static int adjust_dual(int *begin, int step, int *end, int eq)
+static int adjust_dual(int *begin, int step, int *end, int eq, int mu)
 {
 	int f, *p, s, c;
 
@@ -311,9 +311,10 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
 			s = *p;
 
 	c = (f + s + 1) / 2;
-	if (c == 0 || (c > 0 && !eq))
+	if (c == 0 || (c > mu && (!eq || mu > 0)))
 		return 0;
-	if (s < 0)
+	/* Improve convergence for positive matrices by penalizing overcovers */
+	if (s < 0 && mu <= 0)
 		c *= 2;
 
 	for (p = begin; p != end; p += step)
@@ -322,23 +323,24 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
 	return (c < s && s <= 0) || (f >= 0 && f < c);
 }
 
-static void find_reduced_matrix(int *w, int nr, int nc, int nrc)
+static void find_reduced_matrix(int *w, int nr, int nc, int nrc, int mu)
 {
 	int i, k, sum;
 
 	for (k = 0; k < nrc; k++) {
 		for (i = 0; i < nr; i++)
-			adjust_dual(w + i, nr, w + i + nrc, nr <= nc);
+			adjust_dual(w + i, nr, w + i + nrc, nr <= nc, mu);
 		sum = 0;
 		for (i = 0; i < nrc; i += nr)
-			sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr);
+			sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr, mu);
 		if (!sum)
 			break;
 	}
 }
 
 static int input_mt_set_matrix(struct input_mt *mt,
-			       const struct input_mt_pos *pos, int num_pos)
+			       const struct input_mt_pos *pos, int num_pos,
+			       int mu)
 {
 	const struct input_mt_pos *p;
 	struct input_mt_slot *s;
@@ -352,7 +354,7 @@ static int input_mt_set_matrix(struct input_mt *mt,
 		y = input_mt_get_value(s, ABS_MT_POSITION_Y);
 		for (p = pos; p != pos + num_pos; p++) {
 			int dx = x - p->x, dy = y - p->y;
-			*w++ = dx * dx + dy * dy;
+			*w++ = dx * dx + dy * dy - mu;
 		}
 	}
 
@@ -393,17 +395,24 @@ static void input_mt_set_slots(struct input_mt *mt,
  * @slots: the slot assignment to be filled
  * @pos: the position array to match
  * @num_pos: number of positions
+ * @dmax: maximum ABS_MT_POSITION displacement (zero for infinite)
  *
  * Performs a best match against the current contacts and returns
  * the slot assignment list. New contacts are assigned to unused
  * slots.
  *
+ * The assignments are balanced so that all coordinate displacements are
+ * below the euclidian distance dmax. If no such assignment can be found,
+ * some contacts are assigned to unused slots.
+ *
  * Returns zero on success, or negative error in case of failure.
  */
 int input_mt_assign_slots(struct input_dev *dev, int *slots,
-			  const struct input_mt_pos *pos, int num_pos)
+			  const struct input_mt_pos *pos, int num_pos,
+			  int dmax)
 {
 	struct input_mt *mt = dev->mt;
+	int mu = 2 * dmax * dmax;
 	int nrc;
 
 	if (!mt || !mt->red)
@@ -413,8 +422,8 @@ int input_mt_assign_slots(struct input_dev *dev, int *slots,
 	if (num_pos < 1)
 		return 0;
 
-	nrc = input_mt_set_matrix(mt, pos, num_pos);
-	find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc);
+	nrc = input_mt_set_matrix(mt, pos, num_pos, mu);
+	find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc, mu);
 	input_mt_set_slots(mt, slots, num_pos);
 
 	return 0;
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 54ff0379..6c64fb2 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -435,7 +435,7 @@ static void alps_report_mt_data(struct psmouse *psmouse, int n)
 	struct alps_fields *f = &priv->f;
 	int i, slot[MAX_TOUCHES];
 
-	input_mt_assign_slots(dev, slot, f->mt, n);
+	input_mt_assign_slots(dev, slot, f->mt, n, 0);
 	for (i = 0; i < n; i++)
 		alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y);
 
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index c329cdb..b10709f 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -564,7 +564,7 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 		dev->index[n++] = &f[i];
 	}
 
-	input_mt_assign_slots(input, dev->slots, dev->pos, n);
+	input_mt_assign_slots(input, dev->slots, dev->pos, n, 0);
 
 	for (i = 0; i < n; i++)
 		report_finger_data(input, dev->slots[i],
diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
index 8af34ff..9118a18 100644
--- a/drivers/input/mouse/cypress_ps2.c
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -538,7 +538,7 @@ static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt)
 		pos[i].y = contact->y;
 	}
 
-	input_mt_assign_slots(input, slots, pos, n);
+	input_mt_assign_slots(input, slots, pos, n, 0);
 
 	for (i = 0; i < n; i++) {
 		contact = &report_data.contacts[i];
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index f947292..84d0401 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1204,7 +1204,7 @@ static void synaptics_profile_sensor_process(struct psmouse *psmouse,
 		pos[i].y = synaptics_invert_y(hw[i]->y);
 	}
 
-	input_mt_assign_slots(dev, slot, pos, nsemi);
+	input_mt_assign_slots(dev, slot, pos, nsemi, 0);
 
 	for (i = 0; i < nsemi; i++) {
 		input_mt_slot(dev, slot[i]);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index fc49c75..ccdf654 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -126,7 +126,7 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
 			pos[i].y = touch->y;
 		}
 
-		input_mt_assign_slots(ts->input, slots, pos, n);
+		input_mt_assign_slots(ts->input, slots, pos, n, 0);
 	}
 
 	for (i = 0; i < n; i++) {
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
index f583ff6..d7188de 100644
--- a/include/linux/input/mt.h
+++ b/include/linux/input/mt.h
@@ -119,7 +119,8 @@ struct input_mt_pos {
 };
 
 int input_mt_assign_slots(struct input_dev *dev, int *slots,
-			  const struct input_mt_pos *pos, int num_pos);
+			  const struct input_mt_pos *pos, int num_pos,
+			  int dmax);
 
 int input_mt_get_slot_by_key(struct input_dev *dev, int key);
 
-- 
2.2.2

  reply	other threads:[~2015-02-01  9:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-22 19:52 [PATCH] Input: MT - Add support for balanced slot assignment Henrik Rydberg
2015-01-22 20:02 ` Dmitry Torokhov
2015-01-22 20:24   ` Henrik Rydberg
2015-01-23  1:30     ` Peter Hutterer
2015-01-26 16:56 ` Benjamin Tissoires
2015-02-01  9:03   ` Henrik Rydberg [this message]
2015-02-02 15:32     ` Benjamin Tissoires
2015-02-02 17:12       ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150201090323.GA12868@polaris.bitmath.org \
    --to=rydberg@bitmath.org \
    --cc=benjamin.tissoires@gmail.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.hutterer@who-t.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.