From: sylvain.rochet@finsecur.com (Sylvain Rochet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] drm: atmel-hlcdc: Atomic mode-setting conversion
Date: Mon, 9 Feb 2015 19:26:06 +0100 [thread overview]
Message-ID: <20150209182606.GA11712@gradator.net> (raw)
In-Reply-To: <1423236143-6494-1-git-send-email-boris.brezillon@free-electrons.com>
Hello Boris,
On Fri, Feb 06, 2015 at 04:22:23PM +0100, Boris Brezillon wrote:
> Convert the HLCDC driver to atomic mode-setting.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
I am getting the following trace with this patch applied, which seems
pretty straightforward to fix.
Apart from that, it works perfectly, you can add my:
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
------------[ cut here ]------------
WARNING: CPU: 0 PID: 9 at drivers/clk/clk.c:992 clk_disable+0x28/0x34()
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 3.19.0-rc7-next-20150204+ #90
Hardware name: Atmel SAMA5 (Device Tree)
Workqueue: events output_poll_execute
[<c0013284>] (unwind_backtrace) from [<c0010f90>] (show_stack+0x10/0x14)
[<c0010f90>] (show_stack) from [<c001b0fc>] (warn_slowpath_common+0x84/0xb0)
[<c001b0fc>] (warn_slowpath_common) from [<c001b1c4>] (warn_slowpath_null+0x1c/0x24)
[<c001b1c4>] (warn_slowpath_null) from [<c0355418>] (clk_disable+0x28/0x34)
[<c0355418>] (clk_disable) from [<c024b1c0>] (atmel_hlcdc_crtc_disable+0xe8/0x114)
[<c024b1c0>] (atmel_hlcdc_crtc_disable) from [<c02209dc>] (__drm_helper_disable_unused_functions+0xa4/0xd8)
[<c02209dc>] (__drm_helper_disable_unused_functions) from [<c0220a24>] (drm_helper_disable_unused_functions+0x14/0x20)
[<c0220a24>] (drm_helper_disable_unused_functions) from [<c022d078>] (drm_fbdev_cma_init+0x78/0xfc)
[<c022d078>] (drm_fbdev_cma_init) from [<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed+0x30/0x40)
[<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed) from [<c0222800>] (output_poll_execute+0x148/0x188)
[<c0222800>] (output_poll_execute) from [<c002bf94>] (process_one_work+0xfc/0x310)
[<c002bf94>] (process_one_work) from [<c002caec>] (worker_thread+0x60/0x478)
[<c002caec>] (worker_thread) from [<c00305b4>] (kthread+0xd4/0xec)
[<c00305b4>] (kthread) from [<c000e4a0>] (ret_from_fork+0x14/0x34)
---[ end trace 9500ebf8d7076b60 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 9 at drivers/clk/clk.c:898 clk_unprepare+0x24/0x2c()
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 3.19.0-rc7-next-20150204+ #90
Hardware name: Atmel SAMA5 (Device Tree)
Workqueue: events output_poll_execute
[<c0013284>] (unwind_backtrace) from [<c0010f90>] (show_stack+0x10/0x14)
[<c0010f90>] (show_stack) from [<c001b0fc>] (warn_slowpath_common+0x84/0xb0)
[<c001b0fc>] (warn_slowpath_common) from [<c001b1c4>] (warn_slowpath_null+0x1c/0x24)
[<c001b1c4>] (warn_slowpath_null) from [<c03553e8>] (clk_unprepare+0x24/0x2c)
[<c03553e8>] (clk_unprepare) from [<c024b1c8>] (atmel_hlcdc_crtc_disable+0xf0/0x114)
[<c024b1c8>] (atmel_hlcdc_crtc_disable) from [<c02209dc>] (__drm_helper_disable_unused_functions+0xa4/0xd8)
[<c02209dc>] (__drm_helper_disable_unused_functions) from [<c0220a24>] (drm_helper_disable_unused_functions+0x14/0x20)
[<c0220a24>] (drm_helper_disable_unused_functions) from [<c022d078>] (drm_fbdev_cma_init+0x78/0xfc)
[<c022d078>] (drm_fbdev_cma_init) from [<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed+0x30/0x40)
[<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed) from [<c0222800>] (output_poll_execute+0x148/0x188)
[<c0222800>] (output_poll_execute) from [<c002bf94>] (process_one_work+0xfc/0x310)
[<c002bf94>] (process_one_work) from [<c002caec>] (worker_thread+0x60/0x478)
[<c002caec>] (worker_thread) from [<c00305b4>] (kthread+0xd4/0xec)
[<c00305b4>] (kthread) from [<c000e4a0>] (ret_from_fork+0x14/0x34)
---[ end trace 9500ebf8d7076b61 ]---
Sylvain
WARNING: multiple messages have this Message-ID (diff)
From: Sylvain Rochet <sylvain.rochet@finsecur.com>
To: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Daniel Vetter <daniel@ffwll.ch>
Subject: Re: [PATCH v2] drm: atmel-hlcdc: Atomic mode-setting conversion
Date: Mon, 9 Feb 2015 19:26:06 +0100 [thread overview]
Message-ID: <20150209182606.GA11712@gradator.net> (raw)
In-Reply-To: <1423236143-6494-1-git-send-email-boris.brezillon@free-electrons.com>
Hello Boris,
On Fri, Feb 06, 2015 at 04:22:23PM +0100, Boris Brezillon wrote:
> Convert the HLCDC driver to atomic mode-setting.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
I am getting the following trace with this patch applied, which seems
pretty straightforward to fix.
Apart from that, it works perfectly, you can add my:
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
------------[ cut here ]------------
WARNING: CPU: 0 PID: 9 at drivers/clk/clk.c:992 clk_disable+0x28/0x34()
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 3.19.0-rc7-next-20150204+ #90
Hardware name: Atmel SAMA5 (Device Tree)
Workqueue: events output_poll_execute
[<c0013284>] (unwind_backtrace) from [<c0010f90>] (show_stack+0x10/0x14)
[<c0010f90>] (show_stack) from [<c001b0fc>] (warn_slowpath_common+0x84/0xb0)
[<c001b0fc>] (warn_slowpath_common) from [<c001b1c4>] (warn_slowpath_null+0x1c/0x24)
[<c001b1c4>] (warn_slowpath_null) from [<c0355418>] (clk_disable+0x28/0x34)
[<c0355418>] (clk_disable) from [<c024b1c0>] (atmel_hlcdc_crtc_disable+0xe8/0x114)
[<c024b1c0>] (atmel_hlcdc_crtc_disable) from [<c02209dc>] (__drm_helper_disable_unused_functions+0xa4/0xd8)
[<c02209dc>] (__drm_helper_disable_unused_functions) from [<c0220a24>] (drm_helper_disable_unused_functions+0x14/0x20)
[<c0220a24>] (drm_helper_disable_unused_functions) from [<c022d078>] (drm_fbdev_cma_init+0x78/0xfc)
[<c022d078>] (drm_fbdev_cma_init) from [<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed+0x30/0x40)
[<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed) from [<c0222800>] (output_poll_execute+0x148/0x188)
[<c0222800>] (output_poll_execute) from [<c002bf94>] (process_one_work+0xfc/0x310)
[<c002bf94>] (process_one_work) from [<c002caec>] (worker_thread+0x60/0x478)
[<c002caec>] (worker_thread) from [<c00305b4>] (kthread+0xd4/0xec)
[<c00305b4>] (kthread) from [<c000e4a0>] (ret_from_fork+0x14/0x34)
---[ end trace 9500ebf8d7076b60 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 9 at drivers/clk/clk.c:898 clk_unprepare+0x24/0x2c()
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 3.19.0-rc7-next-20150204+ #90
Hardware name: Atmel SAMA5 (Device Tree)
Workqueue: events output_poll_execute
[<c0013284>] (unwind_backtrace) from [<c0010f90>] (show_stack+0x10/0x14)
[<c0010f90>] (show_stack) from [<c001b0fc>] (warn_slowpath_common+0x84/0xb0)
[<c001b0fc>] (warn_slowpath_common) from [<c001b1c4>] (warn_slowpath_null+0x1c/0x24)
[<c001b1c4>] (warn_slowpath_null) from [<c03553e8>] (clk_unprepare+0x24/0x2c)
[<c03553e8>] (clk_unprepare) from [<c024b1c8>] (atmel_hlcdc_crtc_disable+0xf0/0x114)
[<c024b1c8>] (atmel_hlcdc_crtc_disable) from [<c02209dc>] (__drm_helper_disable_unused_functions+0xa4/0xd8)
[<c02209dc>] (__drm_helper_disable_unused_functions) from [<c0220a24>] (drm_helper_disable_unused_functions+0x14/0x20)
[<c0220a24>] (drm_helper_disable_unused_functions) from [<c022d078>] (drm_fbdev_cma_init+0x78/0xfc)
[<c022d078>] (drm_fbdev_cma_init) from [<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed+0x30/0x40)
[<c024b7a8>] (atmel_hlcdc_fb_output_poll_changed) from [<c0222800>] (output_poll_execute+0x148/0x188)
[<c0222800>] (output_poll_execute) from [<c002bf94>] (process_one_work+0xfc/0x310)
[<c002bf94>] (process_one_work) from [<c002caec>] (worker_thread+0x60/0x478)
[<c002caec>] (worker_thread) from [<c00305b4>] (kthread+0xd4/0xec)
[<c00305b4>] (kthread) from [<c000e4a0>] (ret_from_fork+0x14/0x34)
---[ end trace 9500ebf8d7076b61 ]---
Sylvain
next prev parent reply other threads:[~2015-02-09 18:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-06 15:22 [PATCH v2] drm: atmel-hlcdc: Atomic mode-setting conversion Boris Brezillon
2015-02-06 15:22 ` Boris Brezillon
2015-02-06 15:22 ` Boris Brezillon
2015-02-09 18:26 ` Sylvain Rochet [this message]
2015-02-09 18:26 ` Sylvain Rochet
2015-02-09 19:02 ` Boris Brezillon
2015-02-09 19:02 ` Boris Brezillon
2015-02-09 19:02 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150209182606.GA11712@gradator.net \
--to=sylvain.rochet@finsecur.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.