From: Lee Jones <lee.jones@linaro.org>
To: David Paris <david.paris@st.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@stlinux.com,
rtc-linux@googlegroups.com, wim@iguana.be,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux@roeck-us.net
Subject: Re: [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
Date: Wed, 18 Feb 2015 09:34:03 +0000 [thread overview]
Message-ID: <20150218093403.GB18042@x1> (raw)
In-Reply-To: <54C208D9.6050006@st.com>
On Fri, 23 Jan 2015, David Paris wrote:
> On 01/22/2015 12:56 PM, Lee Jones wrote:
> >On current ST platforms the LPC controls a number of functions. This
> >patch enables support for the LPC Watchdog and LPC RTC devices on LPC1
> >and LPC2 respectively.
> >
> >Signed-off-by: David Paris <david.paris@st.com>
> >Signed-off-by: Lee Jones <lee.jones@linaro.org>
> >---
> > arch/arm/boot/dts/stih407-family.dtsi | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> >index 3e31d32..04448a7 100644
> >--- a/arch/arm/boot/dts/stih407-family.dtsi
> >+++ b/arch/arm/boot/dts/stih407-family.dtsi
> >@@ -7,6 +7,7 @@
> > * publishhed by the Free Software Foundation.
> > */
> > #include "stih407-pinctrl.dtsi"
> >+#include <dt-bindings/mfd/st-lpc.h>
> > #include <dt-bindings/reset-controller/stih407-resets.h>
> > / {
> > #address-cells = <1>;
> >@@ -274,5 +275,24 @@
> > status = "disabled";
> > };
> >+
> >+ /* Watchdog and Real-Time Clock */
> >+ lpc@8787000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8787000 0x1000>;
> >+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
> In case of Watchdog, "interrupt" property is not used. So I think we
> can remove it ?
Although we don't use it, this still accurately describes the h/w, so
unless there are any severe objections, I think it can stay.
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
> >+ timeout-sec = <120>;
> >+ st,syscfg = <&syscfg_core>;
> >+ st,lpc-mode = <ST_LPC_MODE_WDT>;
> >+ };
> >+
> >+ lpc@8788000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8788000 0x1000>;
> >+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
> >+ st,lpc-mode = <ST_LPC_MODE_RTC>;
> >+ };
> > };
> > };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
Date: Wed, 18 Feb 2015 09:34:03 +0000 [thread overview]
Message-ID: <20150218093403.GB18042@x1> (raw)
In-Reply-To: <54C208D9.6050006@st.com>
On Fri, 23 Jan 2015, David Paris wrote:
> On 01/22/2015 12:56 PM, Lee Jones wrote:
> >On current ST platforms the LPC controls a number of functions. This
> >patch enables support for the LPC Watchdog and LPC RTC devices on LPC1
> >and LPC2 respectively.
> >
> >Signed-off-by: David Paris <david.paris@st.com>
> >Signed-off-by: Lee Jones <lee.jones@linaro.org>
> >---
> > arch/arm/boot/dts/stih407-family.dtsi | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> >index 3e31d32..04448a7 100644
> >--- a/arch/arm/boot/dts/stih407-family.dtsi
> >+++ b/arch/arm/boot/dts/stih407-family.dtsi
> >@@ -7,6 +7,7 @@
> > * publishhed by the Free Software Foundation.
> > */
> > #include "stih407-pinctrl.dtsi"
> >+#include <dt-bindings/mfd/st-lpc.h>
> > #include <dt-bindings/reset-controller/stih407-resets.h>
> > / {
> > #address-cells = <1>;
> >@@ -274,5 +275,24 @@
> > status = "disabled";
> > };
> >+
> >+ /* Watchdog and Real-Time Clock */
> >+ lpc at 8787000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8787000 0x1000>;
> >+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
> In case of Watchdog, "interrupt" property is not used. So I think we
> can remove it ?
Although we don't use it, this still accurately describes the h/w, so
unless there are any severe objections, I think it can stay.
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
> >+ timeout-sec = <120>;
> >+ st,syscfg = <&syscfg_core>;
> >+ st,lpc-mode = <ST_LPC_MODE_WDT>;
> >+ };
> >+
> >+ lpc at 8788000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8788000 0x1000>;
> >+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
> >+ st,lpc-mode = <ST_LPC_MODE_RTC>;
> >+ };
> > };
> > };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: David Paris <david.paris-qxv4g6HH51o@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org
Subject: Re: [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
Date: Wed, 18 Feb 2015 09:34:03 +0000 [thread overview]
Message-ID: <20150218093403.GB18042@x1> (raw)
In-Reply-To: <54C208D9.6050006-qxv4g6HH51o@public.gmane.org>
On Fri, 23 Jan 2015, David Paris wrote:
> On 01/22/2015 12:56 PM, Lee Jones wrote:
> >On current ST platforms the LPC controls a number of functions. This
> >patch enables support for the LPC Watchdog and LPC RTC devices on LPC1
> >and LPC2 respectively.
> >
> >Signed-off-by: David Paris <david.paris-qxv4g6HH51o@public.gmane.org>
> >Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> >---
> > arch/arm/boot/dts/stih407-family.dtsi | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> >index 3e31d32..04448a7 100644
> >--- a/arch/arm/boot/dts/stih407-family.dtsi
> >+++ b/arch/arm/boot/dts/stih407-family.dtsi
> >@@ -7,6 +7,7 @@
> > * publishhed by the Free Software Foundation.
> > */
> > #include "stih407-pinctrl.dtsi"
> >+#include <dt-bindings/mfd/st-lpc.h>
> > #include <dt-bindings/reset-controller/stih407-resets.h>
> > / {
> > #address-cells = <1>;
> >@@ -274,5 +275,24 @@
> > status = "disabled";
> > };
> >+
> >+ /* Watchdog and Real-Time Clock */
> >+ lpc@8787000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8787000 0x1000>;
> >+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
> In case of Watchdog, "interrupt" property is not used. So I think we
> can remove it ?
Although we don't use it, this still accurately describes the h/w, so
unless there are any severe objections, I think it can stay.
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
> >+ timeout-sec = <120>;
> >+ st,syscfg = <&syscfg_core>;
> >+ st,lpc-mode = <ST_LPC_MODE_WDT>;
> >+ };
> >+
> >+ lpc@8788000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8788000 0x1000>;
> >+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
> >+ st,lpc-mode = <ST_LPC_MODE_RTC>;
> >+ };
> > };
> > };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: David Paris <david.paris@st.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@stlinux.com,
rtc-linux@googlegroups.com, wim@iguana.be,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux@roeck-us.net
Subject: Re: [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
Date: Wed, 18 Feb 2015 09:34:03 +0000 [thread overview]
Message-ID: <20150218093403.GB18042@x1> (raw)
In-Reply-To: <54C208D9.6050006@st.com>
On Fri, 23 Jan 2015, David Paris wrote:
> On 01/22/2015 12:56 PM, Lee Jones wrote:
> >On current ST platforms the LPC controls a number of functions. This
> >patch enables support for the LPC Watchdog and LPC RTC devices on LPC1
> >and LPC2 respectively.
> >
> >Signed-off-by: David Paris <david.paris@st.com>
> >Signed-off-by: Lee Jones <lee.jones@linaro.org>
> >---
> > arch/arm/boot/dts/stih407-family.dtsi | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> >index 3e31d32..04448a7 100644
> >--- a/arch/arm/boot/dts/stih407-family.dtsi
> >+++ b/arch/arm/boot/dts/stih407-family.dtsi
> >@@ -7,6 +7,7 @@
> > * publishhed by the Free Software Foundation.
> > */
> > #include "stih407-pinctrl.dtsi"
> >+#include <dt-bindings/mfd/st-lpc.h>
> > #include <dt-bindings/reset-controller/stih407-resets.h>
> > / {
> > #address-cells = <1>;
> >@@ -274,5 +275,24 @@
> > status = "disabled";
> > };
> >+
> >+ /* Watchdog and Real-Time Clock */
> >+ lpc@8787000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8787000 0x1000>;
> >+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
> In case of Watchdog, "interrupt" property is not used. So I think we
> can remove it ?
Although we don't use it, this still accurately describes the h/w, so
unless there are any severe objections, I think it can stay.
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
> >+ timeout-sec = <120>;
> >+ st,syscfg = <&syscfg_core>;
> >+ st,lpc-mode = <ST_LPC_MODE_WDT>;
> >+ };
> >+
> >+ lpc@8788000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8788000 0x1000>;
> >+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
> >+ st,lpc-mode = <ST_LPC_MODE_RTC>;
> >+ };
> > };
> > };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-02-18 9:34 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-22 11:55 [PATCH v2 0/9] mfd: watchdog: rtc: New driver for ST's LPC IP Lee Jones
2015-01-22 11:55 ` Lee Jones
2015-01-22 11:55 ` [PATCH v2 1/9] mfd: dt-bindings: Provide human readable defines for LPC mode choosing Lee Jones
2015-01-22 11:55 ` Lee Jones
2015-01-22 11:56 ` [PATCH v2 2/9] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` [PATCH v2 3/9] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-23 8:39 ` David Paris
2015-01-23 8:39 ` David Paris
2015-01-23 8:39 ` David Paris
2015-01-23 9:43 ` Lee Jones
2015-01-23 9:43 ` Lee Jones
2015-01-23 9:43 ` Lee Jones
2015-01-23 9:43 ` Lee Jones
2015-02-18 9:34 ` Lee Jones [this message]
2015-02-18 9:34 ` Lee Jones
2015-02-18 9:34 ` Lee Jones
2015-02-18 9:34 ` Lee Jones
2015-01-22 11:56 ` [PATCH v2 5/9] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` [PATCH v2 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 17:10 ` Guenter Roeck
2015-01-22 17:10 ` Guenter Roeck
2015-01-22 17:10 ` Guenter Roeck
2015-01-22 17:21 ` Lee Jones
2015-01-22 17:21 ` Lee Jones
2015-01-22 17:21 ` Lee Jones
2015-01-22 19:31 ` Guenter Roeck
2015-01-22 19:31 ` Guenter Roeck
2015-01-22 19:31 ` Guenter Roeck
2015-01-22 11:56 ` [PATCH v2 7/9] rtc: bindings: Provide ST bindings for ST's LPC RTC device Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` [PATCH v2 8/9] rtc: st: add new driver for ST's LPC RTC Lee Jones
2015-01-22 11:56 ` Lee Jones
2015-01-22 11:56 ` [PATCH v2 9/9] MAINTAINERS: Add Watchdog and RTC files to STI's maintainer entry Lee Jones
2015-01-22 11:56 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150218093403.GB18042@x1 \
--to=lee.jones@linaro.org \
--cc=david.paris@st.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@stlinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rtc-linux@googlegroups.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.