* [PATCH 0/2] ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc
@ 2015-02-23 15:18 ` Roger Quadros
0 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2015-02-23 15:18 UTC (permalink / raw)
To: tony
Cc: balbi, grinberg, grygorii.strashko, linux-omap, linux-arm-kernel,
Roger Quadros
Hi,
These changes fix SATA boot and NAND for OMAP based boards.
I must also point out that basic SATA operation is also
broken when TI_PIPE3 driver is built as a module.
I will be investigating that on lower priority.
--
cheers,
-roger
Roger Quadros (2):
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
ARM: omap2plus_defconfig: Fix SATA boot
arch/arm/configs/omap2plus_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--
2.1.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/2] ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc
@ 2015-02-23 15:18 ` Roger Quadros
0 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2015-02-23 15:18 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
These changes fix SATA boot and NAND for OMAP based boards.
I must also point out that basic SATA operation is also
broken when TI_PIPE3 driver is built as a module.
I will be investigating that on lower priority.
--
cheers,
-roger
Roger Quadros (2):
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
ARM: omap2plus_defconfig: Fix SATA boot
arch/arm/configs/omap2plus_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--
2.1.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
2015-02-23 15:18 ` Roger Quadros
@ 2015-02-23 15:18 ` Roger Quadros
-1 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2015-02-23 15:18 UTC (permalink / raw)
To: tony
Cc: balbi, grinberg, grygorii.strashko, linux-omap, linux-arm-kernel,
Roger Quadros
Without this NAND doesn't work on most EVMs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/configs/omap2plus_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b738652..b674245 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
--
2.1.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/2] ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
@ 2015-02-23 15:18 ` Roger Quadros
0 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2015-02-23 15:18 UTC (permalink / raw)
To: linux-arm-kernel
Without this NAND doesn't work on most EVMs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/configs/omap2plus_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b738652..b674245 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
--
2.1.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: omap2plus_defconfig: Fix SATA boot
2015-02-23 15:18 ` Roger Quadros
@ 2015-02-23 15:18 ` Roger Quadros
-1 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2015-02-23 15:18 UTC (permalink / raw)
To: tony
Cc: balbi, grinberg, grygorii.strashko, linux-omap, linux-arm-kernel,
Roger Quadros
SATA operation depends on PIPE3 PHY and if we want
to boot from SATA drives, we have to have the PIPE3 PHY
driver built-in.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/configs/omap2plus_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b674245..088096f 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -375,7 +375,7 @@ CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
-CONFIG_TI_PIPE3=m
+CONFIG_TI_PIPE3=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
--
2.1.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: omap2plus_defconfig: Fix SATA boot
@ 2015-02-23 15:18 ` Roger Quadros
0 siblings, 0 replies; 8+ messages in thread
From: Roger Quadros @ 2015-02-23 15:18 UTC (permalink / raw)
To: linux-arm-kernel
SATA operation depends on PIPE3 PHY and if we want
to boot from SATA drives, we have to have the PIPE3 PHY
driver built-in.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/configs/omap2plus_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b674245..088096f 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -375,7 +375,7 @@ CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
-CONFIG_TI_PIPE3=m
+CONFIG_TI_PIPE3=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
--
2.1.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 0/2] ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc
2015-02-23 15:18 ` Roger Quadros
@ 2015-02-24 18:02 ` Tony Lindgren
-1 siblings, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2015-02-24 18:02 UTC (permalink / raw)
To: Roger Quadros
Cc: linux-arm-kernel, linux-omap, grygorii.strashko, grinberg, balbi
* Roger Quadros <rogerq@ti.com> [150223 07:22]:
> Hi,
>
> These changes fix SATA boot and NAND for OMAP based boards.
>
> I must also point out that basic SATA operation is also
> broken when TI_PIPE3 driver is built as a module.
> I will be investigating that on lower priority.
OK applying into omap-for-v4.0/fixes. At some point we're going
to make everything use loadable modules and initramfs so best
to make sure things work as loadable modules.
Regards,
Tony
> Roger Quadros (2):
> ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
> ARM: omap2plus_defconfig: Fix SATA boot
>
> arch/arm/configs/omap2plus_defconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> --
> 2.1.0
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/2] ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc
@ 2015-02-24 18:02 ` Tony Lindgren
0 siblings, 0 replies; 8+ messages in thread
From: Tony Lindgren @ 2015-02-24 18:02 UTC (permalink / raw)
To: linux-arm-kernel
* Roger Quadros <rogerq@ti.com> [150223 07:22]:
> Hi,
>
> These changes fix SATA boot and NAND for OMAP based boards.
>
> I must also point out that basic SATA operation is also
> broken when TI_PIPE3 driver is built as a module.
> I will be investigating that on lower priority.
OK applying into omap-for-v4.0/fixes. At some point we're going
to make everything use loadable modules and initramfs so best
to make sure things work as loadable modules.
Regards,
Tony
> Roger Quadros (2):
> ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
> ARM: omap2plus_defconfig: Fix SATA boot
>
> arch/arm/configs/omap2plus_defconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> --
> 2.1.0
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-02-24 18:02 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-23 15:18 [PATCH 0/2] ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc Roger Quadros
2015-02-23 15:18 ` Roger Quadros
2015-02-23 15:18 ` [PATCH 1/2] ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver Roger Quadros
2015-02-23 15:18 ` Roger Quadros
2015-02-23 15:18 ` [PATCH 2/2] ARM: omap2plus_defconfig: Fix SATA boot Roger Quadros
2015-02-23 15:18 ` Roger Quadros
2015-02-24 18:02 ` [PATCH 0/2] ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc Tony Lindgren
2015-02-24 18:02 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.