From: Lukasz Majewski <l.majewski@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 1/4] ARM: DRA7XX: Add config file for Android with fastboot support
Date: Wed, 04 Mar 2015 14:18:48 +0100 [thread overview]
Message-ID: <20150304141848.2bb0ff09@amdc2363> (raw)
In-Reply-To: <1425381044-19460-1-git-send-email-dileep.katta@linaro.org>
Hi Dileep,
> Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
> Signed-off-by: Dileep Katta <dileep.katta@linaro.org>
> ---
> arch/arm/cpu/armv7/omap5/Kconfig | 5 +
> board/ti/dra7xx/Kconfig | 13 ++
> board/ti/dra7xx/MAINTAINERS | 2 +
> configs/dra7xx_evm_android_defconfig | 5 +
> include/configs/dra7xx_evm_android.h | 313
> +++++++++++++++++++++++++++++++++++ 5 files changed, 338 insertions(+)
> create mode 100644 configs/dra7xx_evm_android_defconfig
> create mode 100644 include/configs/dra7xx_evm_android.h
>
> diff --git a/arch/arm/cpu/armv7/omap5/Kconfig
> b/arch/arm/cpu/armv7/omap5/Kconfig index aca862d..d8e9b2d 100644
> --- a/arch/arm/cpu/armv7/omap5/Kconfig
> +++ b/arch/arm/cpu/armv7/omap5/Kconfig
> @@ -12,6 +12,11 @@ config TARGET_OMAP5_UEVM
> config TARGET_DRA7XX_EVM
> bool "TI DRA7XX"
>
> +config TARGET_DRA7XX_EVM_ANDROID
> + bool "TI DRA7XX ANDROID"
> + ---help---
> + TI DRA7XX build for Android. Enables Fastboot.
> +
> config TARGET_BEAGLE_X15
> bool "BeagleBoard X15"
>
> diff --git a/board/ti/dra7xx/Kconfig b/board/ti/dra7xx/Kconfig
> index 3bbd866..6837998 100644
> --- a/board/ti/dra7xx/Kconfig
> +++ b/board/ti/dra7xx/Kconfig
> @@ -10,3 +10,16 @@ config SYS_CONFIG_NAME
> default "dra7xx_evm"
>
> endif
> +
> +if TARGET_DRA7XX_EVM_ANDROID
> +
No needed blank line
> +config SYS_BOARD
> + default "dra7xx"
> +
> +config SYS_VENDOR
> + default "ti"
> +
> +config SYS_CONFIG_NAME
> + default "dra7xx_evm_android"
> +
ditto
> +endif
> diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS
> index 5ec6769..efd4f81 100644
> --- a/board/ti/dra7xx/MAINTAINERS
> +++ b/board/ti/dra7xx/MAINTAINERS
> @@ -6,3 +6,5 @@ F: include/configs/dra7xx_evm.h
> F: configs/dra7xx_evm_defconfig
> F: configs/dra7xx_evm_qspiboot_defconfig
> F: configs/dra7xx_evm_uart3_defconfig
> +F: include/configs/dra7xx_evm_android.h
> +F: configs/dra7xx_evm_android_defconfig
> diff --git a/configs/dra7xx_evm_android_defconfig
> b/configs/dra7xx_evm_android_defconfig new file mode 100644
> index 0000000..64ae4b3
> --- /dev/null
> +++ b/configs/dra7xx_evm_android_defconfig
> @@ -0,0 +1,5 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_OMAP54XX=y
> ++S:CONFIG_TARGET_DRA7XX_EVM_ANDROID=y
> diff --git a/include/configs/dra7xx_evm_android.h
> b/include/configs/dra7xx_evm_android.h new file mode 100644
> index 0000000..68e7eec
> --- /dev/null
> +++ b/include/configs/dra7xx_evm_android.h
> @@ -0,0 +1,313 @@
> +/*
> + * (C) Copyright 2013
> + * Texas Instruments Incorporated.
> + * Lokesh Vutla <lokeshvutla@ti.com>
> + *
> + * Configuration settings for the TI DRA7XX board.
> + * See ti_omap5_common.h for omap5 common settings.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_DRA7XX_EVM_ANDROID_H
> +#define __CONFIG_DRA7XX_EVM_ANDROID_H
> +
> +#define CONFIG_DRA7XX
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> +#ifndef CONFIG_QSPI_BOOT
> +/* MMC ENV related defines */
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2:
> eMMC(1) */ +#define CONFIG_ENV_SIZE (128 << 10)
Please use SZ_1K instead of << 10
> +#define CONFIG_ENV_OFFSET 0xE0000
> +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET +
> CONFIG_ENV_SIZE) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
> +#endif
> +#define CONFIG_CMD_SAVEENV
> +
> +#if (CONFIG_CONS_INDEX == 1)
> +#define CONSOLEDEV "ttyO0"
> +#elif (CONFIG_CONS_INDEX == 3)
> +#define CONSOLEDEV "ttyO2"
> +#endif
> +#define CONFIG_SYS_NS16550_COM1 UART1_BASE /*
> Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2
> UART2_BASE /* UART2 */ +#define
> CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
> +#define CONFIG_BAUDRATE 115200 +
> +#define CONFIG_SYS_OMAP_ABE_SYSCK
> +
> +/* Define the default GPT table for eMMC */
> +#define PARTS_DEFAULT \
> + "uuid_disk=${uuid_gpt_disk};" \
> + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
> +
> +#ifdef CONFIG_NAND
> +/* Define NAND information. */
> +#define NANDARGS \
> + "mtdids=" MTDIDS_DEFAULT "\0" \
> + "mtdparts=" MTDPARTS_DEFAULT "\0" \
> + "nandargs=setenv bootargs console=${console} " \
> + "${optargs} " \
> + "root=${nandroot} " \
> + "rootfstype=${nandrootfstype}\0" \
> + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
> + "nandrootfstype=ubifs rootwait=1\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> + "nand read ${loadaddr} NAND.kernel; " \
> + "bootz ${loadaddr} - ${fdtaddr}\0"
> +#define NANDBOOT "run nandboot; "
> +#endif
> +
> +#define DFU_ALT_INFO_MMC \
> + "dfu_alt_info_mmc=" \
> + "boot part 0 1;" \
> + "rootfs part 0 2;" \
> + "MLO fat 0 1;" \
> + "spl-os-args fat 0 1;" \
> + "spl-os-image fat 0 1;" \
> + "u-boot.img fat 0 1;" \
> + "uEnv.txt fat 0 1\0"
> +
> +#define DFU_ALT_INFO_EMMC \
> + "dfu_alt_info_emmc=" \
> + "MLO raw 0x100 0x100 mmcpart 0;" \
> + "u-boot.img raw 0x300 0x1000 mmcpart 0\0"
> +
> +#define DFU_ALT_INFO_RAM \
> + "dfu_alt_info_ram=" \
> + "kernel ram 0x80200000 0x4000000;" \
> + "fdt ram 0x80f80000 0x80000;" \
> + "ramdisk ram 0x81000000 0x4000000\0"
> +
> +#define DFUARGS \
> + "dfu_bufsiz=0x10000\0" \
> + DFU_ALT_INFO_MMC \
> + DFU_ALT_INFO_EMMC \
> + DFU_ALT_INFO_RAM
> +
> +/* Fastboot */
> +#define CONFIG_CMD_FASTBOOT
> +#define CONFIG_ANDROID_BOOT_IMAGE
> +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
> +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000
> +#define CONFIG_FASTBOOT_FLASH
> +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
> +
> +#include <configs/ti_omap5_common.h>
> +
> +/* Enhance our eMMC support / experience. */
> +#define CONFIG_CMD_GPT
> +#define CONFIG_EFI_PARTITION
> +#define CONFIG_PARTITION_UUIDS
> +#define CONFIG_CMD_PART
> +
> +/* CPSW Ethernet */
> +#define CONFIG_CMD_NET /* 'bootp' and 'tftp'
> */ +#define CONFIG_CMD_DHCP
> +#define CONFIG_BOOTP_DNS /* Configurable parts of
> CMD_DHCP */ +#define CONFIG_BOOTP_DNS2
> +#define CONFIG_BOOTP_SEND_HOSTNAME
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_SUBNETMASK
> +#define CONFIG_NET_RETRY_COUNT 10
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_MII
> +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block
> */ +#define CONFIG_MII /* Required in
> net/eth.c */ +#define CONFIG_PHY_GIGE /*
> per-board part of CPSW */ +#define CONFIG_PHYLIB
> +
> +/* SPI */
> +#undef CONFIG_OMAP3_SPI
> +#define CONFIG_TI_QSPI
> +#define CONFIG_SPI_FLASH
> +#define CONFIG_SPI_FLASH_SPANSION
> +#define CONFIG_CMD_SF
> +#define CONFIG_CMD_SPI
> +#define CONFIG_SPI_FLASH_BAR
> +#define CONFIG_TI_SPI_MMAP
> +#define CONFIG_SF_DEFAULT_SPEED 48000000
> +#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
> +
> +/*
> + * Default to using SPI for environment, etc.
> + * 0x000000 - 0x010000 : QSPI.SPL (64KiB)
> + * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB)
> + * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB)
> + * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB)
> + * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
> + * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
> + * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
> + * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
> + * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
> + * 0x9E0000 - 0x2000000 : USERLAND
> + */
> +#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
> +#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
> +#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
> +#if defined(CONFIG_QSPI_BOOT)
> +/* In SPL, use the environment and discard MMC support for space. */
> +#ifdef CONFIG_SPL_BUILD
> +#undef CONFIG_SPL_MMC_SUPPORT
> +#undef CONFIG_SPL_MAX_SIZE
> +#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */
SZ_1K
Please use globally.
> +#endif
> +#define CONFIG_SPL_ENV_SUPPORT
> +#define CONFIG_ENV_IS_IN_SPI_FLASH
> +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
> +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
> +#define CONFIG_ENV_SIZE (64 << 10)
> +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB
> sectors */ +#define CONFIG_ENV_OFFSET 0x1C0000
> +#define CONFIG_ENV_OFFSET_REDUND 0x1D0000
> +#endif
> +
> +/* SPI SPL */
> +#define CONFIG_SPL_SPI_SUPPORT
> +#define CONFIG_SPL_DMA_SUPPORT
> +#ifdef CONFIG_SPL_BUILD
> +#define CONFIG_TI_EDMA
> +#endif
> +#define CONFIG_SPL_SPI_LOAD
> +#define CONFIG_SPL_SPI_FLASH_SUPPORT
> +#define CONFIG_SPL_SPI_BUS 0
> +#define CONFIG_SPL_SPI_CS 0
> +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000
> +
> +#define CONFIG_SUPPORT_EMMC_BOOT
> +
> +/* USB xHCI HOST */
> +#define CONFIG_CMD_USB
> +#define CONFIG_USB_HOST
> +#define CONFIG_USB_XHCI
> +#define CONFIG_USB_XHCI_OMAP
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
> +
> +#define CONFIG_OMAP_USB_PHY
> +#define CONFIG_OMAP_USB2PHY2_HOST
> +
> +/* USB GADGET */
> +#define CONFIG_USB_DWC3_PHY_OMAP
> +#define CONFIG_USB_DWC3_OMAP
> +#define CONFIG_USB_DWC3
> +#define CONFIG_USB_DWC3_GADGET
> +
> +#define CONFIG_USB_GADGET
> +#define CONFIG_MUSB_GADGET
> +#define CONFIG_MUSB_PIO_ONLY
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0451
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xd022
> +#define CONFIG_USB_GADGET_DUALSPEED
> +
> +/* USB Device Firmware Update support */
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_RAM
> +#define CONFIG_CMD_DFU
> +
> +#define CONFIG_DFU_MMC
> +#define CONFIG_DFU_RAM
> +
> +/* SATA */
> +#define CONFIG_BOARD_LATE_INIT
> +#define CONFIG_CMD_SCSI
> +#define CONFIG_LIBATA
> +#define CONFIG_SCSI_AHCI
> +#define CONFIG_SCSI_AHCI_PLAT
> +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
> +#define CONFIG_SYS_SCSI_MAX_LUN 1
> +#define CONFIG_SYS_SCSI_MAX_DEVICE
> (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> +
> CONFIG_SYS_SCSI_MAX_LUN) +
> +/* NAND support */
> +#ifdef CONFIG_NAND
> +/* NAND: device related configs */
> +#define CONFIG_SYS_NAND_PAGE_SIZE 2048
> +#define CONFIG_SYS_NAND_OOBSIZE 64
> +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
> +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
> +#define CONFIG_SYS_NAND_PAGE_COUNT
> (CONFIG_SYS_NAND_BLOCK_SIZE / \
> + CONFIG_SYS_NAND_PAGE_SIZE)
> +#define CONFIG_SYS_NAND_5_ADDR_CYCLE
> +/* NAND: driver related configs */
> +#define CONFIG_NAND_OMAP_GPMC
> +#define CONFIG_NAND_OMAP_ELM
> +#define CONFIG_SYS_NAND_ONFI_DETECTION
> +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
> +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
> +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8,
> 9, \
> + 10, 11, 12, 13, 14, 15, 16,
> 17, \
> + 18, 19, 20, 21, 22, 23, 24,
> 25, \
> + 26, 27, 28, 29, 30, 31, 32,
> 33, \
> + 34, 35, 36, 37, 38, 39, 40,
> 41, \
> + 42, 43, 44, 45, 46, 47, 48,
> 49, \
> + 50, 51, 52, 53, 54, 55, 56,
> 57, } +#define CONFIG_SYS_NAND_ECCSIZE 512
> +#define CONFIG_SYS_NAND_ECCBYTES 14
> +#define MTDIDS_DEFAULT "nand0=nand.0"
> +#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
> + "128k(NAND.SPL)," \
> + "128k(NAND.SPL.backup1)," \
> + "128k(NAND.SPL.backup2)," \
> + "128k(NAND.SPL.backup3)," \
> + "256k(NAND.u-boot-spl-os)," \
> + "1m(NAND.u-boot)," \
> + "128k(NAND.u-boot-env)," \
> + "128k(NAND.u-boot-env.backup1),"
> \
> + "8m(NAND.kernel)," \
> + "-(NAND.file-system)"
> +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
> +/* NAND: SPL related configs */
> +#ifdef CONFIG_SPL_NAND_SUPPORT
> +#define CONFIG_SPL_NAND_AM33XX_BCH
> +#endif
> +/* NAND: SPL falcon mode configs */
> +#ifdef CONFIG_SPL_OS_BOOT
> +#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot
> params*/ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS
> 0x00200000 /* kernel offset */ +#define
> CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif
> +#endif /* !CONFIG_NAND */
> +
> +/* Parallel NOR Support */
> +#if defined(CONFIG_NOR)
> +/* NOR: device related configs */
> +#define CONFIG_SYS_MAX_FLASH_SECT 512
> +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
> +#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /*
> 64 MB */ +/* #define CONFIG_INIT_IGNORE_ERROR */
> +#undef CONFIG_SYS_NO_FLASH
> +#define CONFIG_CMD_FLASH
> +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
> +#define CONFIG_SYS_FLASH_PROTECTION
> +#define CONFIG_SYS_FLASH_CFI
> +#define CONFIG_FLASH_CFI_DRIVER
> +#define CONFIG_FLASH_CFI_MTD
> +#define CONFIG_SYS_MAX_FLASH_BANKS 1
> +#define CONFIG_SYS_FLASH_BASE (0x08000000)
> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
> +/* Reduce SPL size by removing unlikey targets */
> +#ifdef CONFIG_NOR_BOOT
> +#define CONFIG_ENV_IS_IN_FLASH
> +#define CONFIG_ENV_SECT_SIZE (128 * 1024) /*
> 128 KiB */ +#define
> MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define
> MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
> + "1m(NOR.u-boot)," \
> + "128k(NOR.u-boot-env)," \
> + "128k(NOR.u-boot-env.backup1),"
> \
> + "256k(NOR.u-boot-spl-os)," \
> + "8m(NOR.kernel)," \
> + "-(NOR.rootfs)"
> +#define CONFIG_ENV_OFFSET 0x00100000
> +#define CONFIG_ENV_OFFSET_REDUND 0x00120000
> +#endif
> +#endif /* NOR support */
> +
> +#endif /* __CONFIG_DRA7XX_EVM_ANDROID_H */
Despite some minor comments,
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
next prev parent reply other threads:[~2015-03-04 13:18 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 11:10 [U-Boot] [PATCH v1 1/4] ARM: DRA7XX: Add config file for Android with fastboot support Dileep Katta
2015-03-03 11:10 ` [U-Boot] [PATCH v2 2/4] fastboot: call board_usb_init() to enable usb Dileep Katta
2015-03-04 13:19 ` Lukasz Majewski
2015-03-04 17:05 ` Stegmaier, Angela
2015-03-04 18:29 ` Tom Rini
2015-03-04 19:06 ` Dileep Katta
2015-03-05 14:37 ` Tom Rini
2015-03-12 6:36 ` Dileep Katta
2015-03-12 8:55 ` Lukasz Majewski
2015-03-12 17:28 ` Marek Vasut
2015-03-12 21:12 ` Dileep Katta
2015-03-13 7:53 ` Lukasz Majewski
2015-03-13 19:28 ` Dileep Katta
2015-03-13 20:55 ` Lukasz Majewski
2015-03-27 17:53 ` Dileep Katta
2015-03-27 18:15 ` Tom Rini
2015-03-27 18:25 ` Marek Vasut
2015-03-30 8:38 ` Lukasz Majewski
2015-03-03 11:10 ` [U-Boot] [PATCH v3 3/4] ARM: DRA7: Set serial number environment variable Dileep Katta
2015-03-04 13:23 ` Lukasz Majewski
2015-03-04 16:53 ` Tom Rini
2015-03-07 7:00 ` Nishanth Menon
2015-03-03 11:10 ` [U-Boot] [PATCH v1 4/4] ARM: DRA7: fastboot: Implement reboot-bootloader command - Implemented fb_set_reboot_flag() for DRA7 - Defined a weak function, fb_check_reboot_flag() - Implemented for DRA7 Dileep Katta
2015-03-03 14:15 ` Rob Herring
2015-03-04 16:57 ` Tom Rini
2015-03-04 13:31 ` Lukasz Majewski
2015-03-03 11:53 ` [U-Boot] [PATCH v1 1/4] ARM: DRA7XX: Add config file for Android with fastboot support Dileep Katta
2015-03-04 13:18 ` Lukasz Majewski [this message]
2015-03-04 16:52 ` Tom Rini
2015-03-12 6:31 ` Dileep Katta
2015-03-12 19:29 ` Tom Rini
2015-03-17 18:38 ` [U-Boot] [PATCH v2 1/1] " Dileep Katta
2015-03-18 16:11 ` Tom Rini
2015-03-18 21:12 ` Dileep Katta
2015-03-19 13:15 ` Tom Rini
2015-03-23 22:41 ` Dileep Katta
2015-03-24 22:34 ` [U-Boot] [PATCH v3 1/3] ARM: DRA7XX: Enable Fastboot Dileep Katta
2015-03-24 22:34 ` [U-Boot] [PATCH v3 2/3] ARM: DRA7: Set serial number environment variable Dileep Katta
2015-03-27 14:19 ` Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-24 22:34 ` [U-Boot] [PATCH v3 3/3] fastboot: ARM: OMAP5: Enable reboot-bootloader Dileep Katta
2015-03-27 14:19 ` Tom Rini
2015-03-27 17:28 ` Dileep Katta
2015-03-27 17:36 ` [U-Boot] [PATCH v4 " Dileep Katta
2015-03-27 18:02 ` Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot, v4, " Tom Rini
2015-03-27 14:19 ` [U-Boot] [PATCH v3 1/3] ARM: DRA7XX: Enable Fastboot Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot,v3,1/3] " Tom Rini
2015-03-23 8:50 ` [U-Boot] [PATCH v2 1/1] ARM: DRA7XX: Add config file for Android with fastboot support Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150304141848.2bb0ff09@amdc2363 \
--to=l.majewski@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.