From: Lukasz Majewski <l.majewski@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/1] ARM: DRA7XX: Add config file for Android with fastboot support
Date: Mon, 23 Mar 2015 09:50:46 +0100 [thread overview]
Message-ID: <20150323095046.64b2254a@amdc2363> (raw)
In-Reply-To: <1426617503-12477-1-git-send-email-dileep.katta@linaro.org>
Hi Dileep,
> - Added new configuration for Android fastboot
> - This is based on following patch modified accordingly
> http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b
>
> Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
> Signed-off-by: Dileep Katta <dileep.katta@linaro.org>
> ---
> Changes in v2:
> - Merged the header file content to existing dra7xx_evm.h to
> avoid duplication
> - Removed unnecessary definitions as per comments
>
> board/ti/dra7xx/MAINTAINERS | 1 +
> configs/dra7xx_evm_android_defconfig | 5 +++++
> include/configs/dra7xx_evm.h | 30
> ++++++++++++++++++++++++++++++ 3 files changed, 36 insertions(+)
> create mode 100644 configs/dra7xx_evm_android_defconfig
>
> diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS
> index 5ec6769..1b5ae71 100644
> --- a/board/ti/dra7xx/MAINTAINERS
> +++ b/board/ti/dra7xx/MAINTAINERS
> @@ -6,3 +6,4 @@ F: include/configs/dra7xx_evm.h
> F: configs/dra7xx_evm_defconfig
> F: configs/dra7xx_evm_qspiboot_defconfig
> F: configs/dra7xx_evm_uart3_defconfig
> +F: configs/dra7xx_evm_android_defconfig
> diff --git a/configs/dra7xx_evm_android_defconfig
> b/configs/dra7xx_evm_android_defconfig new file mode 100644
> index 0000000..5fdce85
> --- /dev/null
> +++ b/configs/dra7xx_evm_android_defconfig
> @@ -0,0 +1,5 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,DRA7XX_ANDROID"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_OMAP54XX=y
> ++S:CONFIG_TARGET_DRA7XX_EVM=y
> diff --git a/include/configs/dra7xx_evm.h
> b/include/configs/dra7xx_evm.h index dee2b11..dd20e08 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -43,6 +43,16 @@
> "uuid_disk=${uuid_gpt_disk};" \
> "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
>
> +#ifdef CONFIG_DRA7XX_ANDROID
> +/* Fastboot */
> +#define CONFIG_CMD_FASTBOOT
> +#define CONFIG_ANDROID_BOOT_IMAGE
> +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
> +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000
> +#define CONFIG_FASTBOOT_FLASH
> +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
> +#endif
> +
> #include <configs/ti_omap5_common.h>
>
> /* Enhance our eMMC support / experience. */
> @@ -115,7 +125,11 @@
> #define CONFIG_SPL_SPI_SUPPORT
> #define CONFIG_SPL_SPI_LOAD
> #define CONFIG_SPL_SPI_FLASH_SUPPORT
> +#ifdef CONFIG_DRA7XX_ANDROID
> +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000
> +#else
> #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
> +#endif
>
> #define CONFIG_SUPPORT_EMMC_BOOT
>
> @@ -130,6 +144,22 @@
> #define CONFIG_OMAP_USB_PHY
> #define CONFIG_OMAP_USB2PHY2_HOST
>
> +/* USB GADGET */
> +#define CONFIG_USB_GADGET
> +#define CONFIG_MUSB_GADGET
> +#define CONFIG_MUSB_PIO_ONLY
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
> +#ifdef CONFIG_CMD_FASTBOOT
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0451
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xd022
> +#else
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0403
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
> +#endif
> +#define CONFIG_USB_GADGET_DUALSPEED
> +
> /* SATA */
> #define CONFIG_BOARD_LATE_INIT
> #define CONFIG_CMD_SCSI
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
prev parent reply other threads:[~2015-03-23 8:50 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 11:10 [U-Boot] [PATCH v1 1/4] ARM: DRA7XX: Add config file for Android with fastboot support Dileep Katta
2015-03-03 11:10 ` [U-Boot] [PATCH v2 2/4] fastboot: call board_usb_init() to enable usb Dileep Katta
2015-03-04 13:19 ` Lukasz Majewski
2015-03-04 17:05 ` Stegmaier, Angela
2015-03-04 18:29 ` Tom Rini
2015-03-04 19:06 ` Dileep Katta
2015-03-05 14:37 ` Tom Rini
2015-03-12 6:36 ` Dileep Katta
2015-03-12 8:55 ` Lukasz Majewski
2015-03-12 17:28 ` Marek Vasut
2015-03-12 21:12 ` Dileep Katta
2015-03-13 7:53 ` Lukasz Majewski
2015-03-13 19:28 ` Dileep Katta
2015-03-13 20:55 ` Lukasz Majewski
2015-03-27 17:53 ` Dileep Katta
2015-03-27 18:15 ` Tom Rini
2015-03-27 18:25 ` Marek Vasut
2015-03-30 8:38 ` Lukasz Majewski
2015-03-03 11:10 ` [U-Boot] [PATCH v3 3/4] ARM: DRA7: Set serial number environment variable Dileep Katta
2015-03-04 13:23 ` Lukasz Majewski
2015-03-04 16:53 ` Tom Rini
2015-03-07 7:00 ` Nishanth Menon
2015-03-03 11:10 ` [U-Boot] [PATCH v1 4/4] ARM: DRA7: fastboot: Implement reboot-bootloader command - Implemented fb_set_reboot_flag() for DRA7 - Defined a weak function, fb_check_reboot_flag() - Implemented for DRA7 Dileep Katta
2015-03-03 14:15 ` Rob Herring
2015-03-04 16:57 ` Tom Rini
2015-03-04 13:31 ` Lukasz Majewski
2015-03-03 11:53 ` [U-Boot] [PATCH v1 1/4] ARM: DRA7XX: Add config file for Android with fastboot support Dileep Katta
2015-03-04 13:18 ` Lukasz Majewski
2015-03-04 16:52 ` Tom Rini
2015-03-12 6:31 ` Dileep Katta
2015-03-12 19:29 ` Tom Rini
2015-03-17 18:38 ` [U-Boot] [PATCH v2 1/1] " Dileep Katta
2015-03-18 16:11 ` Tom Rini
2015-03-18 21:12 ` Dileep Katta
2015-03-19 13:15 ` Tom Rini
2015-03-23 22:41 ` Dileep Katta
2015-03-24 22:34 ` [U-Boot] [PATCH v3 1/3] ARM: DRA7XX: Enable Fastboot Dileep Katta
2015-03-24 22:34 ` [U-Boot] [PATCH v3 2/3] ARM: DRA7: Set serial number environment variable Dileep Katta
2015-03-27 14:19 ` Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-24 22:34 ` [U-Boot] [PATCH v3 3/3] fastboot: ARM: OMAP5: Enable reboot-bootloader Dileep Katta
2015-03-27 14:19 ` Tom Rini
2015-03-27 17:28 ` Dileep Katta
2015-03-27 17:36 ` [U-Boot] [PATCH v4 " Dileep Katta
2015-03-27 18:02 ` Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot, v4, " Tom Rini
2015-03-27 14:19 ` [U-Boot] [PATCH v3 1/3] ARM: DRA7XX: Enable Fastboot Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot,v3,1/3] " Tom Rini
2015-03-23 8:50 ` Lukasz Majewski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150323095046.64b2254a@amdc2363 \
--to=l.majewski@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.