diff for duplicates of <20150317135913.GA4034@amd> diff --git a/a/1.txt b/N1/1.txt index 5f53184..78b1228 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -7,8 +7,8 @@ Hi! > >>> Well, conversion between Li-ion's voltage and state of charge at 0 > >>> current is well known: > >> -> >> We can’t measure at 0 current since the OMAP is driven from battery -> >> and charger and may also draw some mA… +> >> We can?t measure at 0 current since the OMAP is driven from battery +> >> and charger and may also draw some mA? > > > > Yes, but you know how many mA you are taking just now. So if you knew > > the internal resistance, you could compute the voltage at 0 @@ -17,7 +17,7 @@ Hi! > > As far as I understand the twl4030 charger and MADC it is not possible to > separate these values. It is only reporting the inflow from charger to -> battery + system. So you don’t know how many mA are supplying the system +> battery + system. So you don?t know how many mA are supplying the system > and how many mA are left over for charging. > > You can only assume how much the system is drawing while running (something @@ -33,7 +33,7 @@ get one while discharging, which is what really matters...? > > Yes, and that coefficient should be internal battery resistance ;-). > > But where do you know this value from to write it into a DT file? -> Usually you can’t measure it easily and for some batteries you don’t have +> Usually you can?t measure it easily and for some batteries you don?t have > a data sheet. > > Contrary, the calibration curves can easily be measured on the device diff --git a/a/content_digest b/N1/content_digest index 9a3eba3..d44882b 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -6,22 +6,10 @@ "ref\0940EE988-03A4-4B1B-A168-959E367953A6@goldelico.com\0" "ref\020150317103746.GB3759@amd\0" "ref\0CDA0FF88-2D00-46E0-828E-DD6F4FF4ADAF@goldelico.com\0" - "From\0Pavel Machek <pavel@ucw.cz>\0" - "Subject\0Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings\0" + "From\0pavel@ucw.cz (Pavel Machek)\0" + "Subject\0[PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings\0" "Date\0Tue, 17 Mar 2015 14:59:13 +0100\0" - "To\0Dr. H. Nikolaus Schaller <hns@goldelico.com>\0" - "Cc\0Belisko Marek <marek.belisko@gmail.com>" - mark.rutland@arm.com - Sebastian Reichel <sre@kernel.org> - Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> - David Woodhouse <dwmw2@infradead.org> - Tony Lindgren <tony@atomide.com> - devicetree@vger.kernel.org <devicetree@vger.kernel.org> - LKML <linux-kernel@vger.kernel.org> - linux-omap@vger.kernel.org <linux-omap@vger.kernel.org> - linux-arm-kernel <linux-arm-kernel@lists.infradead.org> - Linux PM mailing list <linux-pm@vger.kernel.org> - " GTA04 owners <gta04-owner@goldelico.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi!\n" @@ -33,8 +21,8 @@ "> >>> Well, conversion between Li-ion's voltage and state of charge at 0\n" "> >>> current is well known:\n" "> >> \n" - "> >> We can\342\200\231t measure at 0 current since the OMAP is driven from battery\n" - "> >> and charger and may also draw some mA\342\200\246\n" + "> >> We can?t measure at 0 current since the OMAP is driven from battery\n" + "> >> and charger and may also draw some mA?\n" "> > \n" "> > Yes, but you know how many mA you are taking just now. So if you knew\n" "> > the internal resistance, you could compute the voltage at 0\n" @@ -43,7 +31,7 @@ "> \n" "> As far as I understand the twl4030 charger and MADC it is not possible to\n" "> separate these values. It is only reporting the inflow from charger to\n" - "> battery + system. So you don\342\200\231t know how many mA are supplying the system\n" + "> battery + system. So you don?t know how many mA are supplying the system\n" "> and how many mA are left over for charging.\n" "> \n" "> You can only assume how much the system is drawing while running (something\n" @@ -59,7 +47,7 @@ "> > Yes, and that coefficient should be internal battery resistance ;-).\n" "> \n" "> But where do you know this value from to write it into a DT file?\n" - "> Usually you can\342\200\231t measure it easily and for some batteries you don\342\200\231t have\n" + "> Usually you can?t measure it easily and for some batteries you don?t have\n" "> a data sheet.\n" "> \n" "> Contrary, the calibration curves can easily be measured on the device\n" @@ -74,4 +62,4 @@ "(english) http://www.livejournal.com/~pavelmachek\n" (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -1b2652beda6f3bc694d4a3b563c04f58109a59b75467dec29dcc4d8fb0b136dd +56cee8fc57539b3cb358527a46b799640e2690d33c0bdf22db634957d8908a5e
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.