[PATCH 00/12] USB: chipidea: patchset for performance improvement

[peter.chen@freescale.com (Peter Chen)]

On Thu, Mar 19, 2015 at 11:36:29AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 09:19 Thu 19 Mar     , Peter Chen wrote:
> > Hi all,
> > 
> > In this patch set, I add some interfaces for tuning the performance
> > of chipidea usb driver. With this set, the USB performance can be improved
> > at some user cases with suitable parameters. The main changes:
> > 
> > - Interface to tune interrupt threshold control, and set
> > 'Immediate' for default value
> > - The glue layer can disable stream mode according to USB role
> > - Interface to tune AHB burst configuration at SBUSCFG
> > - Interface to tune tx/rx burst size
> > - i.mx changes for achieving better performance, it can reduce
> >   the latecy between bus and USB FIFO, and reduce the overrun
> >   and underrun occurrences, it is useful for the system bus is busy.
> >   we see great improvement for ISO transfer, eg, high resolution
> >   USB camera when the bus is busy.
> > 
> > Below are some test results at imx6sx sdb board
> > (set ehci_hcd.park=3 at bootargs), the tests are done
> > at v4.0 kernel, no other bus loading during the tests,
> > so we have not seen performance change for some use cases.
> > 
> > USB Mass Storage (Host mode)
> > With Patch Set		Without Patch Set
> > R: 26.9 MB/s		27 MB/s
> > W: 25.2 MB/s		24.5 MB/s
> > 
> > 1G USB Ethernet Card
> > With Patch Set		Without Patch Set
> > TX: 186 Mb/s		185 Mb/s
> > RX: 219 Mb/s		216 Mb/s
> > 
> > g_ncm (Device Mode)
> > With Patch Set		Without Patch Set
> > TX: 166MB/s		163MB/s
> > RX: 230MB/s		184MB/s
> 
> The improve is not drag sticks except for gcm RX
> 
> The most interesting path will be on full system loaded
> 

Yeah, I can have a try. But we have no GPU driver and related
apps on it, I am not sure if I can create starve bus situation.
Any high bus loading tools suggest?

-- 

Best Regards,
Peter Chen