[PATCH v2 1/2] ARM: dts: imx6: factor out pinmux for edm1 module

[mgr@pengutronix.de (Michael Grzeschik)]

On Sun, Mar 08, 2015 at 05:25:59PM +0100, Michael Grzeschik wrote:
> Thw Wandboard is using the EDM1-CF-IMX6 module which is
> defined under the edm standard.
> 
> http://www.edm-standard.org/
> 
> As this module is used on more boards this patch moves the default
> pinmux settings into the special file imx6qdl-edm1.dtsi.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
> - fixed the alphabetical order of the nodes
> - moved MX6QDL_PAD_GPIO_16__ENET_REF_CLK to the board hogpins
> 
>  arch/arm/boot/dts/imx6qdl-edm1.dtsi            | 230 +++++++++++++++++++++++++
>  arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi |   1 +
>  arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi |   1 +
>  arch/arm/boot/dts/imx6qdl-wandboard.dtsi       |  99 +----------
>  4 files changed, 234 insertions(+), 97 deletions(-)
>  create mode 100644 arch/arm/boot/dts/imx6qdl-edm1.dtsi

subliminal ping...

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |