[PATCH v2 1/2] ARM: dts: imx6: factor out pinmux for edm1 module

[mgr@pengutronix.de (Michael Grzeschik)]

On Tue, Mar 24, 2015 at 08:18:11PM +0800, Shawn Guo wrote:
> On Mon, Mar 23, 2015 at 04:19:37PM +0100, Michael Grzeschik wrote:
> > On Sun, Mar 08, 2015 at 05:25:59PM +0100, Michael Grzeschik wrote:
> > > Thw Wandboard is using the EDM1-CF-IMX6 module which is
> > > defined under the edm standard.
> > > 
> > > http://www.edm-standard.org/
> > > 
> > > As this module is used on more boards this patch moves the default
> > > pinmux settings into the special file imx6qdl-edm1.dtsi.
> > > 
> > > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > > ---
> > > - fixed the alphabetical order of the nodes
> > > - moved MX6QDL_PAD_GPIO_16__ENET_REF_CLK to the board hogpins
> > > 
> > >  arch/arm/boot/dts/imx6qdl-edm1.dtsi            | 230 +++++++++++++++++++++++++
> > >  arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi |   1 +
> > >  arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi |   1 +
> > >  arch/arm/boot/dts/imx6qdl-wandboard.dtsi       |  99 +----------
> > >  4 files changed, 234 insertions(+), 97 deletions(-)
> > >  create mode 100644 arch/arm/boot/dts/imx6qdl-edm1.dtsi
> > 
> > subliminal ping...
> 
> Have we got anyone test the patch on Wandboard as requested by rsc [1]?

So far, not yet. :/

Could anyone test?

Thanks,
Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |