From: Lee Jones <lee.jones@linaro.org>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Sangbeom Kim <sbkim73@samsung.com>,
Samuel Ortiz <sameo@linux.intel.com>,
linux-kernel@vger.kernel.org, Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: Re: [PATCH 1/2] mfd: sec: Fix RTC alarm interrupt number on S2MPS11
Date: Tue, 7 Apr 2015 08:37:28 +0100 [thread overview]
Message-ID: <20150407073728.GH3461@x1> (raw)
In-Reply-To: <1427985376-20420-2-git-send-email-k.kozlowski@samsung.com>
On Thu, 02 Apr 2015, Krzysztof Kozlowski wrote:
> The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of
> RTC alarms 0 and 1 were inversed between these two devices. So when
> rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to
> S2MPS11_IRQ_RTCA1, not RTCA0.
>
> Fix this by using consistent RTC alarm interrupt numbers and adding a
> BUILD_BUG_ON for future generations.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> drivers/mfd/sec-irq.c | 14 ++++++++++----
> include/linux/mfd/samsung/irq.h | 2 +-
> 2 files changed, 11 insertions(+), 5 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> index ba86a918c2da..806fa8dbb22d 100644
> --- a/drivers/mfd/sec-irq.c
> +++ b/drivers/mfd/sec-irq.c
> @@ -61,14 +61,14 @@ static const struct regmap_irq s2mps11_irqs[] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_RTC60S_MASK,
> },
> - [S2MPS11_IRQ_RTCA0] = {
> - .reg_offset = 1,
> - .mask = S2MPS11_IRQ_RTCA0_MASK,
> - },
> [S2MPS11_IRQ_RTCA1] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_RTCA1_MASK,
> },
> + [S2MPS11_IRQ_RTCA0] = {
> + .reg_offset = 1,
> + .mask = S2MPS11_IRQ_RTCA0_MASK,
> + },
> [S2MPS11_IRQ_SMPL] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_SMPL_MASK,
> @@ -484,6 +484,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> return ret;
> }
>
> + /*
> + * The rtc-s5m driver requests S2MPS14_IRQ_RTCA0 also for S2MPS11
> + * so the interrupt number must be consistent.
> + */
> + BUILD_BUG_ON(((enum s2mps14_irq)S2MPS11_IRQ_RTCA0) != S2MPS14_IRQ_RTCA0);
> +
> return 0;
> }
>
> diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
> index f35af7361b60..667aa40486dd 100644
> --- a/include/linux/mfd/samsung/irq.h
> +++ b/include/linux/mfd/samsung/irq.h
> @@ -74,8 +74,8 @@ enum s2mps11_irq {
> S2MPS11_IRQ_MRB,
>
> S2MPS11_IRQ_RTC60S,
> - S2MPS11_IRQ_RTCA0,
> S2MPS11_IRQ_RTCA1,
> + S2MPS11_IRQ_RTCA0,
> S2MPS11_IRQ_SMPL,
> S2MPS11_IRQ_RTC1S,
> S2MPS11_IRQ_WTSR,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] mfd: sec: Fix RTC alarm interrupt number on S2MPS11
Date: Tue, 7 Apr 2015 08:37:28 +0100 [thread overview]
Message-ID: <20150407073728.GH3461@x1> (raw)
In-Reply-To: <1427985376-20420-2-git-send-email-k.kozlowski@samsung.com>
On Thu, 02 Apr 2015, Krzysztof Kozlowski wrote:
> The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of
> RTC alarms 0 and 1 were inversed between these two devices. So when
> rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to
> S2MPS11_IRQ_RTCA1, not RTCA0.
>
> Fix this by using consistent RTC alarm interrupt numbers and adding a
> BUILD_BUG_ON for future generations.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> drivers/mfd/sec-irq.c | 14 ++++++++++----
> include/linux/mfd/samsung/irq.h | 2 +-
> 2 files changed, 11 insertions(+), 5 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> index ba86a918c2da..806fa8dbb22d 100644
> --- a/drivers/mfd/sec-irq.c
> +++ b/drivers/mfd/sec-irq.c
> @@ -61,14 +61,14 @@ static const struct regmap_irq s2mps11_irqs[] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_RTC60S_MASK,
> },
> - [S2MPS11_IRQ_RTCA0] = {
> - .reg_offset = 1,
> - .mask = S2MPS11_IRQ_RTCA0_MASK,
> - },
> [S2MPS11_IRQ_RTCA1] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_RTCA1_MASK,
> },
> + [S2MPS11_IRQ_RTCA0] = {
> + .reg_offset = 1,
> + .mask = S2MPS11_IRQ_RTCA0_MASK,
> + },
> [S2MPS11_IRQ_SMPL] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_SMPL_MASK,
> @@ -484,6 +484,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> return ret;
> }
>
> + /*
> + * The rtc-s5m driver requests S2MPS14_IRQ_RTCA0 also for S2MPS11
> + * so the interrupt number must be consistent.
> + */
> + BUILD_BUG_ON(((enum s2mps14_irq)S2MPS11_IRQ_RTCA0) != S2MPS14_IRQ_RTCA0);
> +
> return 0;
> }
>
> diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
> index f35af7361b60..667aa40486dd 100644
> --- a/include/linux/mfd/samsung/irq.h
> +++ b/include/linux/mfd/samsung/irq.h
> @@ -74,8 +74,8 @@ enum s2mps11_irq {
> S2MPS11_IRQ_MRB,
>
> S2MPS11_IRQ_RTC60S,
> - S2MPS11_IRQ_RTCA0,
> S2MPS11_IRQ_RTCA1,
> + S2MPS11_IRQ_RTCA0,
> S2MPS11_IRQ_SMPL,
> S2MPS11_IRQ_RTC1S,
> S2MPS11_IRQ_WTSR,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-04-07 7:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-02 14:36 [PATCH 0/2] Arndale Octa: Fix S2MPS11 RTC alarm IRQ Krzysztof Kozlowski
2015-04-02 14:36 ` Krzysztof Kozlowski
2015-04-02 14:36 ` Krzysztof Kozlowski
2015-04-02 14:36 ` [PATCH 1/2] mfd: sec: Fix RTC alarm interrupt number on S2MPS11 Krzysztof Kozlowski
2015-04-02 14:36 ` Krzysztof Kozlowski
2015-04-07 7:37 ` Lee Jones [this message]
2015-04-07 7:37 ` Lee Jones
2015-04-02 14:36 ` [PATCH 2/2] ARM: dts: Fix pinctrl settings for S2MPS11 RTC alarm IRQ on Arndale Octa Krzysztof Kozlowski
2015-04-02 14:36 ` Krzysztof Kozlowski
2015-04-02 14:36 ` Krzysztof Kozlowski
2015-04-17 13:30 ` Krzysztof Kozlowski
2015-04-17 13:30 ` Krzysztof Kozlowski
2015-04-17 13:30 ` Krzysztof Kozlowski
2015-04-27 0:59 ` Kukjin Kim
2015-04-27 0:59 ` Kukjin Kim
2015-04-30 15:58 ` Kevin Hilman
2015-04-30 15:58 ` Kevin Hilman
2015-05-01 8:04 ` Krzysztof Kozlowski
2015-05-01 8:04 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150407073728.GH3461@x1 \
--to=lee.jones@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=javier.martinez@collabora.co.uk \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.