From: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
To: Linus Torvalds
<torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PULL REQUEST] i2c for 4.1
Date: Tue, 14 Apr 2015 23:22:59 +0200 [thread overview]
Message-ID: <20150414212255.GA1374@katana> (raw)
[-- Attachment #1: Type: text/plain, Size: 8348 bytes --]
Linus,
here is the i2c pull request for 4.1. Most notable:
* introducing the i2c_quirk infrastructure. Now, flaws of I2C
controllers can be described and the core will check if the
flaws collide with the messages to be sent
* wait_for_completion return type cleanup series
* new drivers for Digicolor, Netlogic XLP, Ingenic JZ4780
* updates to the I2C slave framework which include API changes. Its
only user was updated, too. Documentation was finally added
* changed dynamic bus numbering for the DT case. This could change bus
numbers for users. However, it fixes a collision where dynamic and
static busses request the same id.
* driver bugfixes, cleanups
Please pull.
Thanks,
Wolfram
The following changes since commit 9eccca0843205f87c00404b663188b88eb248051:
Linux 4.0-rc3 (2015-03-08 16:09:09 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-next
for you to fetch changes up to 2bbd681ba2bfa0f3805fb541b0840b96893c5727:
i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller (2015-04-10 18:59:49 +0200)
----------------------------------------------------------------
Alexey Brodkin (1):
i2c: designware: Suppress error message if platform_get_irq() < 0
Amit Tomar (1):
i2c: mpc: Fix ISR return value
Baruch Siach (1):
i2c: add support for the Digicolor I2C controller
Grygorii Strashko (3):
i2c: change input parameter to i2c_adapter for prepare/unprepare_recovery
i2c: davinci: use bus recovery infrastructure
i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
Ioan Nicu (1):
i2c: i2c-mux-gpio: remove error messages for probe deferrals
Jarkko Nikula (5):
i2c: i801: Don't break user-visible strings
i2c: i801: Remove i801_driver forward declaration
i2c: i801: Use managed devm_* memory and irq allocation
i2c: i801: Remove pci_enable_device() call from i801_resume()
i2c: i801: Use managed pcim_* PCI device initialization and reservation
Neelesh Gupta (1):
i2c: opal: Update quirk flags to do write-then-anything
Nicholas Mc Guire (15):
i2c: mxs: match wait_for_completion_timeout return type
i2c: tegra: match return type of wait_for_completion_timeout
i2c: wmt: use msecs_to_jiffies for time conversions
i2c: cadence: fixup wait_for_completion_timeout return handling
i2c: designware: fixup return handling of wait_for_completion_timeout
i2c: i2c-bcm2835: match return type of wait_for_completion_timeout
i2c: wmt: match return type of wait_for_completion_timeout
i2c: ismt: fix type of return var of wait_for_completion_timeout
i2c: imx: match return type of wait_for_completion_timeout
i2c: nomadik: match return type of wait_for_completion_timeout
i2c: nomadik: match status to return type of read_i2c
i2c: axxia: fixup return type of wait_for_completion_timeout
i2c: at91: fixup return type of wait_for_completion_timeout
i2c: img-scb: fixup of wait_for_completion_timeout return handling
i2c: davinci: fixup wait_for_completion_timeout handling
Octavian Purdila (1):
i2c: dln2: set the device tree node of the adapter
Subhendu Sekhar Behera (2):
of: Add vendor prefix 'netlogic'
i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller
Uwe Kleine-König (1):
i2c: pca954x: improve usage of gpiod API
Valentin Longchamp (1):
i2c: mpc: assign the correct prescaler from SVR
Wolfram Sang (19):
i2c: add quirk structure to describe adapter flaws
i2c: add quirk checks to core
i2c: at91: make use of the new infrastructure for quirks
i2c: opal: make use of the new infrastructure for quirks
i2c: qup: make use of the new infrastructure for quirks
i2c: cpm: make use of the new infrastructure for quirks
i2c: axxia: make use of the new infrastructure for quirks
i2c: dln2: make use of the new infrastructure for quirks
i2c: powermac: make use of the new infrastructure for quirks
i2c: viperboard: make use of the new infrastructure for quirks
i2c: pmcmsp: make use of the new infrastructure for quirks
i2c: bcm-iproc: make use of the new infrastructure for quirks
Merge branch 'i2c/quirks' into i2c/for-4.1
of: base: add function to get highest id of an alias stem
i2c: busses with dynamic ids should start after fixed ids for DT
i2c: slave: rework the slave API
Documentation: i2c: describe the new slave mode
i2c: slave: add documentation for i2c-slave-eeprom
i2c: slave-eeprom: add more info when to increase the pointer
Zubair Lutfullah Kakakhel (1):
i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780
.../devicetree/bindings/i2c/i2c-davinci.txt | 3 +
.../devicetree/bindings/i2c/i2c-digicolor.txt | 25 +
.../devicetree/bindings/i2c/i2c-jz4780.txt | 35 +
.../devicetree/bindings/i2c/i2c-xlp9xx.txt | 22 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
Documentation/i2c/slave-eeprom-backend | 14 +
Documentation/i2c/slave-interface | 179 +++++
Documentation/i2c/summary | 4 -
drivers/i2c/busses/Kconfig | 28 +
drivers/i2c/busses/Makefile | 3 +
drivers/i2c/busses/i2c-at91.c | 39 +-
drivers/i2c/busses/i2c-axxia.c | 27 +-
drivers/i2c/busses/i2c-bcm-iproc.c | 15 +-
drivers/i2c/busses/i2c-bcm2835.c | 2 +-
drivers/i2c/busses/i2c-cadence.c | 6 +-
drivers/i2c/busses/i2c-cpm.c | 20 +-
drivers/i2c/busses/i2c-davinci.c | 194 +++--
drivers/i2c/busses/i2c-designware-core.c | 3 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 6 +-
drivers/i2c/busses/i2c-digicolor.c | 385 ++++++++++
drivers/i2c/busses/i2c-dln2.c | 13 +-
drivers/i2c/busses/i2c-i801.c | 51 +-
drivers/i2c/busses/i2c-img-scb.c | 14 +-
drivers/i2c/busses/i2c-imx.c | 10 +-
drivers/i2c/busses/i2c-ismt.c | 5 +-
drivers/i2c/busses/i2c-jz4780.c | 832 +++++++++++++++++++++
drivers/i2c/busses/i2c-mpc.c | 33 +-
drivers/i2c/busses/i2c-mxs.c | 5 +-
drivers/i2c/busses/i2c-nomadik.c | 6 +-
drivers/i2c/busses/i2c-opal.c | 24 +-
drivers/i2c/busses/i2c-pmcmsp.c | 42 +-
drivers/i2c/busses/i2c-powermac.c | 10 +-
drivers/i2c/busses/i2c-qup.c | 21 +-
drivers/i2c/busses/i2c-rcar.c | 10 +-
drivers/i2c/busses/i2c-tegra.c | 12 +-
drivers/i2c/busses/i2c-viperboard.c | 10 +-
drivers/i2c/busses/i2c-wmt.c | 10 +-
drivers/i2c/busses/i2c-xlp9xx.c | 445 +++++++++++
drivers/i2c/i2c-core.c | 73 +-
drivers/i2c/i2c-slave-eeprom.c | 18 +-
drivers/i2c/muxes/i2c-mux-gpio.c | 10 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 6 +-
drivers/of/base.c | 26 +
include/linux/i2c.h | 55 +-
include/linux/of.h | 6 +
include/linux/platform_data/i2c-davinci.h | 1 +
46 files changed, 2483 insertions(+), 276 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
create mode 100644 Documentation/i2c/slave-eeprom-backend
create mode 100644 Documentation/i2c/slave-interface
create mode 100644 drivers/i2c/busses/i2c-digicolor.c
create mode 100644 drivers/i2c/busses/i2c-jz4780.c
create mode 100644 drivers/i2c/busses/i2c-xlp9xx.c
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Wolfram Sang <wsa@the-dreams.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PULL REQUEST] i2c for 4.1
Date: Tue, 14 Apr 2015 23:22:59 +0200 [thread overview]
Message-ID: <20150414212255.GA1374@katana> (raw)
[-- Attachment #1: Type: text/plain, Size: 8348 bytes --]
Linus,
here is the i2c pull request for 4.1. Most notable:
* introducing the i2c_quirk infrastructure. Now, flaws of I2C
controllers can be described and the core will check if the
flaws collide with the messages to be sent
* wait_for_completion return type cleanup series
* new drivers for Digicolor, Netlogic XLP, Ingenic JZ4780
* updates to the I2C slave framework which include API changes. Its
only user was updated, too. Documentation was finally added
* changed dynamic bus numbering for the DT case. This could change bus
numbers for users. However, it fixes a collision where dynamic and
static busses request the same id.
* driver bugfixes, cleanups
Please pull.
Thanks,
Wolfram
The following changes since commit 9eccca0843205f87c00404b663188b88eb248051:
Linux 4.0-rc3 (2015-03-08 16:09:09 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-next
for you to fetch changes up to 2bbd681ba2bfa0f3805fb541b0840b96893c5727:
i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller (2015-04-10 18:59:49 +0200)
----------------------------------------------------------------
Alexey Brodkin (1):
i2c: designware: Suppress error message if platform_get_irq() < 0
Amit Tomar (1):
i2c: mpc: Fix ISR return value
Baruch Siach (1):
i2c: add support for the Digicolor I2C controller
Grygorii Strashko (3):
i2c: change input parameter to i2c_adapter for prepare/unprepare_recovery
i2c: davinci: use bus recovery infrastructure
i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
Ioan Nicu (1):
i2c: i2c-mux-gpio: remove error messages for probe deferrals
Jarkko Nikula (5):
i2c: i801: Don't break user-visible strings
i2c: i801: Remove i801_driver forward declaration
i2c: i801: Use managed devm_* memory and irq allocation
i2c: i801: Remove pci_enable_device() call from i801_resume()
i2c: i801: Use managed pcim_* PCI device initialization and reservation
Neelesh Gupta (1):
i2c: opal: Update quirk flags to do write-then-anything
Nicholas Mc Guire (15):
i2c: mxs: match wait_for_completion_timeout return type
i2c: tegra: match return type of wait_for_completion_timeout
i2c: wmt: use msecs_to_jiffies for time conversions
i2c: cadence: fixup wait_for_completion_timeout return handling
i2c: designware: fixup return handling of wait_for_completion_timeout
i2c: i2c-bcm2835: match return type of wait_for_completion_timeout
i2c: wmt: match return type of wait_for_completion_timeout
i2c: ismt: fix type of return var of wait_for_completion_timeout
i2c: imx: match return type of wait_for_completion_timeout
i2c: nomadik: match return type of wait_for_completion_timeout
i2c: nomadik: match status to return type of read_i2c
i2c: axxia: fixup return type of wait_for_completion_timeout
i2c: at91: fixup return type of wait_for_completion_timeout
i2c: img-scb: fixup of wait_for_completion_timeout return handling
i2c: davinci: fixup wait_for_completion_timeout handling
Octavian Purdila (1):
i2c: dln2: set the device tree node of the adapter
Subhendu Sekhar Behera (2):
of: Add vendor prefix 'netlogic'
i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller
Uwe Kleine-König (1):
i2c: pca954x: improve usage of gpiod API
Valentin Longchamp (1):
i2c: mpc: assign the correct prescaler from SVR
Wolfram Sang (19):
i2c: add quirk structure to describe adapter flaws
i2c: add quirk checks to core
i2c: at91: make use of the new infrastructure for quirks
i2c: opal: make use of the new infrastructure for quirks
i2c: qup: make use of the new infrastructure for quirks
i2c: cpm: make use of the new infrastructure for quirks
i2c: axxia: make use of the new infrastructure for quirks
i2c: dln2: make use of the new infrastructure for quirks
i2c: powermac: make use of the new infrastructure for quirks
i2c: viperboard: make use of the new infrastructure for quirks
i2c: pmcmsp: make use of the new infrastructure for quirks
i2c: bcm-iproc: make use of the new infrastructure for quirks
Merge branch 'i2c/quirks' into i2c/for-4.1
of: base: add function to get highest id of an alias stem
i2c: busses with dynamic ids should start after fixed ids for DT
i2c: slave: rework the slave API
Documentation: i2c: describe the new slave mode
i2c: slave: add documentation for i2c-slave-eeprom
i2c: slave-eeprom: add more info when to increase the pointer
Zubair Lutfullah Kakakhel (1):
i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780
.../devicetree/bindings/i2c/i2c-davinci.txt | 3 +
.../devicetree/bindings/i2c/i2c-digicolor.txt | 25 +
.../devicetree/bindings/i2c/i2c-jz4780.txt | 35 +
.../devicetree/bindings/i2c/i2c-xlp9xx.txt | 22 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
Documentation/i2c/slave-eeprom-backend | 14 +
Documentation/i2c/slave-interface | 179 +++++
Documentation/i2c/summary | 4 -
drivers/i2c/busses/Kconfig | 28 +
drivers/i2c/busses/Makefile | 3 +
drivers/i2c/busses/i2c-at91.c | 39 +-
drivers/i2c/busses/i2c-axxia.c | 27 +-
drivers/i2c/busses/i2c-bcm-iproc.c | 15 +-
drivers/i2c/busses/i2c-bcm2835.c | 2 +-
drivers/i2c/busses/i2c-cadence.c | 6 +-
drivers/i2c/busses/i2c-cpm.c | 20 +-
drivers/i2c/busses/i2c-davinci.c | 194 +++--
drivers/i2c/busses/i2c-designware-core.c | 3 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 6 +-
drivers/i2c/busses/i2c-digicolor.c | 385 ++++++++++
drivers/i2c/busses/i2c-dln2.c | 13 +-
drivers/i2c/busses/i2c-i801.c | 51 +-
drivers/i2c/busses/i2c-img-scb.c | 14 +-
drivers/i2c/busses/i2c-imx.c | 10 +-
drivers/i2c/busses/i2c-ismt.c | 5 +-
drivers/i2c/busses/i2c-jz4780.c | 832 +++++++++++++++++++++
drivers/i2c/busses/i2c-mpc.c | 33 +-
drivers/i2c/busses/i2c-mxs.c | 5 +-
drivers/i2c/busses/i2c-nomadik.c | 6 +-
drivers/i2c/busses/i2c-opal.c | 24 +-
drivers/i2c/busses/i2c-pmcmsp.c | 42 +-
drivers/i2c/busses/i2c-powermac.c | 10 +-
drivers/i2c/busses/i2c-qup.c | 21 +-
drivers/i2c/busses/i2c-rcar.c | 10 +-
drivers/i2c/busses/i2c-tegra.c | 12 +-
drivers/i2c/busses/i2c-viperboard.c | 10 +-
drivers/i2c/busses/i2c-wmt.c | 10 +-
drivers/i2c/busses/i2c-xlp9xx.c | 445 +++++++++++
drivers/i2c/i2c-core.c | 73 +-
drivers/i2c/i2c-slave-eeprom.c | 18 +-
drivers/i2c/muxes/i2c-mux-gpio.c | 10 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 6 +-
drivers/of/base.c | 26 +
include/linux/i2c.h | 55 +-
include/linux/of.h | 6 +
include/linux/platform_data/i2c-davinci.h | 1 +
46 files changed, 2483 insertions(+), 276 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
create mode 100644 Documentation/i2c/slave-eeprom-backend
create mode 100644 Documentation/i2c/slave-interface
create mode 100644 drivers/i2c/busses/i2c-digicolor.c
create mode 100644 drivers/i2c/busses/i2c-jz4780.c
create mode 100644 drivers/i2c/busses/i2c-xlp9xx.c
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next reply other threads:[~2015-04-14 21:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-14 21:22 Wolfram Sang [this message]
2015-04-14 21:22 ` [PULL REQUEST] i2c for 4.1 Wolfram Sang
-- strict thread matches above, loose matches on Subject: below --
2015-04-17 8:33 Wolfram Sang
2015-04-17 8:33 ` Wolfram Sang
2015-04-26 12:40 Wolfram Sang
2015-04-26 12:40 ` Wolfram Sang
2015-06-05 1:28 Wolfram Sang
2015-06-05 1:28 ` Wolfram Sang
2015-06-18 15:23 Wolfram Sang
2015-06-18 15:23 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150414212255.GA1374@katana \
--to=wsa-z923lk4zbo2bacvfa/9k2g@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.