From: Felipe Balbi <balbi@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
linux-gpio@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Aaro Koskinen <aaro.koskinen@iki.fi>, Felipe Balbi <balbi@ti.com>,
Javier Martinez Canillas <javier@dowhile0.org>,
Grygorii Strashko <grygorii.strashko@linaro.org>,
Kevin Hilman <khilman@deeprootsystems.com>,
Nishanth Menon <nm@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>
Subject: Re: [PATCH] gpio: omap: Fix regression for MPUIO interrupts
Date: Fri, 24 Apr 2015 11:10:28 -0500 [thread overview]
Message-ID: <20150424161028.GF5692@saruman.tx.rr.com> (raw)
In-Reply-To: <1429833257-28188-1-git-send-email-tony@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 3412 bytes --]
On Thu, Apr 23, 2015 at 04:54:17PM -0700, Tony Lindgren wrote:
> At some point with all the GPIO clean-up we've broken the
> MPUIO interrupts. Those are just a little bit different from
> the GPIO interrupts, so we can fix it up just by setting
> different irqchip functions for it. And then we can just
> remove all old code trying to do the same.
>
> Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>
> Cc: Grygorii Strashko <grygorii.strashko@linaro.org>
> Cc: Kevin Hilman <khilman@deeprootsystems.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
> ---
> drivers/gpio/gpio-omap.c | 48 +++++++++---------------------------------------
> 1 file changed, 9 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
> index 6553361..b59c3ca 100644
> --- a/drivers/gpio/gpio-omap.c
> +++ b/drivers/gpio/gpio-omap.c
> @@ -1023,38 +1023,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
> dev_err(bank->dev, "Could not get gpio dbck\n");
> }
>
> -static void
> -omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
> - unsigned int num)
> -{
> - struct irq_chip_generic *gc;
> - struct irq_chip_type *ct;
> -
> - gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
> - handle_simple_irq);
> - if (!gc) {
> - dev_err(bank->dev, "Memory alloc failed for gc\n");
> - return;
> - }
> -
> - ct = gc->chip_types;
> -
> - /* NOTE: No ack required, reading IRQ status clears it. */
> - ct->chip.irq_mask = irq_gc_mask_set_bit;
> - ct->chip.irq_unmask = irq_gc_mask_clr_bit;
> - ct->chip.irq_set_type = omap_gpio_irq_type;
> -
> - if (bank->regs->wkup_en)
> - ct->chip.irq_set_wake = omap_gpio_wake_enable;
> -
> - ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
> - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
> - IRQ_NOREQUEST | IRQ_NOPROBE, 0);
> -}
> -
> static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
> {
> - int j;
> static int gpio;
> int irq_base = 0;
> int ret;
> @@ -1101,6 +1071,15 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
> }
> #endif
>
> + /* MPUIO is a bit different, reading IRQ status clears it */
> + if (bank->is_mpuio) {
> + irqc->irq_ack = dummy_irq_chip.irq_ack;
> + irqc->irq_mask = irq_gc_mask_set_bit;
> + irqc->irq_unmask = irq_gc_mask_clr_bit;
> + if (!bank->regs->wkup_en)
> + irqc->irq_set_wake = NULL;
> + }
> +
> ret = gpiochip_irqchip_add(&bank->chip, irqc,
> irq_base, omap_gpio_irq_handler,
> IRQ_TYPE_NONE);
> @@ -1114,15 +1093,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
> gpiochip_set_chained_irqchip(&bank->chip, irqc,
> bank->irq, omap_gpio_irq_handler);
>
> - for (j = 0; j < bank->width; j++) {
> - int irq = irq_find_mapping(bank->chip.irqdomain, j);
> - if (bank->is_mpuio) {
> - omap_mpuio_alloc_gc(bank, irq, bank->width);
> - irq_set_chip_and_handler(irq, NULL, NULL);
> - set_irq_flags(irq, 0);
> - }
> - }
> -
> return 0;
> }
>
> --
> 2.1.4
>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] gpio: omap: Fix regression for MPUIO interrupts
Date: Fri, 24 Apr 2015 11:10:28 -0500 [thread overview]
Message-ID: <20150424161028.GF5692@saruman.tx.rr.com> (raw)
In-Reply-To: <1429833257-28188-1-git-send-email-tony@atomide.com>
On Thu, Apr 23, 2015 at 04:54:17PM -0700, Tony Lindgren wrote:
> At some point with all the GPIO clean-up we've broken the
> MPUIO interrupts. Those are just a little bit different from
> the GPIO interrupts, so we can fix it up just by setting
> different irqchip functions for it. And then we can just
> remove all old code trying to do the same.
>
> Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>
> Cc: Grygorii Strashko <grygorii.strashko@linaro.org>
> Cc: Kevin Hilman <khilman@deeprootsystems.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
> ---
> drivers/gpio/gpio-omap.c | 48 +++++++++---------------------------------------
> 1 file changed, 9 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
> index 6553361..b59c3ca 100644
> --- a/drivers/gpio/gpio-omap.c
> +++ b/drivers/gpio/gpio-omap.c
> @@ -1023,38 +1023,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
> dev_err(bank->dev, "Could not get gpio dbck\n");
> }
>
> -static void
> -omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
> - unsigned int num)
> -{
> - struct irq_chip_generic *gc;
> - struct irq_chip_type *ct;
> -
> - gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
> - handle_simple_irq);
> - if (!gc) {
> - dev_err(bank->dev, "Memory alloc failed for gc\n");
> - return;
> - }
> -
> - ct = gc->chip_types;
> -
> - /* NOTE: No ack required, reading IRQ status clears it. */
> - ct->chip.irq_mask = irq_gc_mask_set_bit;
> - ct->chip.irq_unmask = irq_gc_mask_clr_bit;
> - ct->chip.irq_set_type = omap_gpio_irq_type;
> -
> - if (bank->regs->wkup_en)
> - ct->chip.irq_set_wake = omap_gpio_wake_enable;
> -
> - ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
> - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
> - IRQ_NOREQUEST | IRQ_NOPROBE, 0);
> -}
> -
> static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
> {
> - int j;
> static int gpio;
> int irq_base = 0;
> int ret;
> @@ -1101,6 +1071,15 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
> }
> #endif
>
> + /* MPUIO is a bit different, reading IRQ status clears it */
> + if (bank->is_mpuio) {
> + irqc->irq_ack = dummy_irq_chip.irq_ack;
> + irqc->irq_mask = irq_gc_mask_set_bit;
> + irqc->irq_unmask = irq_gc_mask_clr_bit;
> + if (!bank->regs->wkup_en)
> + irqc->irq_set_wake = NULL;
> + }
> +
> ret = gpiochip_irqchip_add(&bank->chip, irqc,
> irq_base, omap_gpio_irq_handler,
> IRQ_TYPE_NONE);
> @@ -1114,15 +1093,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
> gpiochip_set_chained_irqchip(&bank->chip, irqc,
> bank->irq, omap_gpio_irq_handler);
>
> - for (j = 0; j < bank->width; j++) {
> - int irq = irq_find_mapping(bank->chip.irqdomain, j);
> - if (bank->is_mpuio) {
> - omap_mpuio_alloc_gc(bank, irq, bank->width);
> - irq_set_chip_and_handler(irq, NULL, NULL);
> - set_irq_flags(irq, 0);
> - }
> - }
> -
> return 0;
> }
>
> --
> 2.1.4
>
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150424/ad5a0d54/attachment.sig>
next prev parent reply other threads:[~2015-04-24 16:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-23 23:54 [PATCH] gpio: omap: Fix regression for MPUIO interrupts Tony Lindgren
2015-04-23 23:54 ` Tony Lindgren
2015-04-24 14:58 ` Grygorii.Strashko@linaro.org
2015-04-24 14:58 ` Grygorii.Strashko@linaro.org
2015-04-24 15:29 ` santosh shilimkar
2015-04-24 15:29 ` santosh shilimkar
2015-04-24 16:10 ` Felipe Balbi [this message]
2015-04-24 16:10 ` Felipe Balbi
2015-05-06 13:21 ` Linus Walleij
2015-05-06 13:21 ` Linus Walleij
2015-05-06 15:36 ` Tony Lindgren
2015-05-06 15:36 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150424161028.GF5692@saruman.tx.rr.com \
--to=balbi@ti.com \
--cc=aaro.koskinen@iki.fi \
--cc=gnurou@gmail.com \
--cc=grygorii.strashko@linaro.org \
--cc=javier@dowhile0.org \
--cc=khilman@deeprootsystems.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=ssantosh@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.